|
| STATUS | faInit (UINT32 addr, UINT32 addr_inc, int nadc, int iFlag) |
| | Initialize JLAB FADC Library. More...
|
| |
| int | faCheckAddresses (int id) |
| |
| int | faSlot (unsigned int i) |
| | Convert an index into a slot number, where the index is the element of an array of FADCs in the order in which they were initialized. More...
|
| |
| int | faSetClockSource (int id, int clkSrc) |
| | Set the clock source. More...
|
| |
| int | faGSetClockSource (int clkSrc) |
| | Set the clock source for all initialized modules. More...
|
| |
| void | faStatus (int id, int sflag) |
| | Print Status of fADC250 to standard out. More...
|
| |
| void | faGStatus (int sflag) |
| | Print a summary of all initialized fADC250s. More...
|
| |
| unsigned int | faGetFirmwareVersions (int id, int pflag) |
| | Get the firmware versions of each FPGA. More...
|
| |
| int | faSetProcMode (int id, int pmode, unsigned int PL, unsigned int PTW, int NSB, unsigned int NSA, unsigned int NP, unsigned int NPED, unsigned int MAXPED, unsigned int NSAT) |
| | Configure the processing type/mode. More...
|
| |
| void | faGSetProcMode (int pmode, unsigned int PL, unsigned int PTW, int NSB, unsigned int NSA, unsigned int NP, unsigned int NPED, unsigned int MAXPED, unsigned int NSAT) |
| | Configure the processing type/mode for all initialized fADC250s. More...
|
| |
| int | faCalcMaxUnAckTriggers (int mode, int ptw, int nsa, int nsb, int np) |
| | Return the maximum number of unacknowledged triggers a specific mode can handle. More...
|
| |
| int | faSetTriggerStopCondition (int id, int trigger_max) |
| | Set the maximum number of unacknowledged triggers before module stops accepting incoming triggers. More...
|
| |
| int | faSetTriggerBusyCondition (int id, int trigger_max) |
| | Set the maximum number of unacknowledged triggers before module asserts BUSY. More...
|
| |
| int | faSetTriggerPathSamples (int id, unsigned int TNSA, unsigned int TNSAT) |
| | Set the number of samples that are included before and after threshold crossing that are sent through the trigger path. More...
|
| |
| void | faGSetTriggerPathSamples (unsigned int TNSA, unsigned int TNSAT) |
| | Set the number of samples that are included before and after threshold crossing that are sent through the trigger path for all initialized fADC250s. More...
|
| |
| int | faSetTriggerPathThreshold (int id, unsigned int TPT) |
| | Set the threshold used to determine what samples are sent through the trigger path. More...
|
| |
| void | faGSetTriggerPathThreshold (unsigned int TPT) |
| | Set the threshold used to determine what samples are sent through the trigger path for all initialized fADC250s. More...
|
| |
| void | faSetNormalMode (int id, int opt) |
| | Configure the ADC Processing in "Normal Mode". More...
|
| |
| void | faSetInvertedMode (int id) |
| | Configure the ADC Processing in "Inverted (positive polarity) Mode". More...
|
| |
| int | faSetPPG (int id, int pmode, unsigned short *sdata, int nsamples) |
| | Setup FADC Progammable Pulse Generator. More...
|
| |
| void | faPPGEnable (int id) |
| | Enable the programmable pulse generator. More...
|
| |
| void | faPPGDisable (int id) |
| | Disable the programmable pulse generator. More...
|
| |
| int | faSuppressTriggerTime (int id, int suppress) |
| | Suppress all, or just the MSB, of the trigger time words from the datastream. More...
|
| |
| int | faGSuppressTriggerTime (int suppress) |
| | Suppress all, or just the MSB, of the trigger time words from the datastream. More...
|
| |
| int | faReadBlock (int id, volatile UINT32 *data, int nwrds, int rflag) |
| | General Data readout routine. More...
|
| |
| int | faGetBlockError (int pflag) |
| | Return the type of error that occurred while attempting a block read from faReadBlock. More...
|
| |
| int | faReadBlockStatus (int id, volatile UINT32 *data, int nwrds, int rflag) |
| | For asychronous calls to faReadBlock, this routine completes the block transfer. More...
|
| |
| int | faPrintBlock (int id, int rflag) |
| | Print the current available block to standard out. More...
|
| |
| unsigned int | faReadCSR (int id) |
| | Get the value of the Control/Status Register. More...
|
| |
| void | faClear (int id) |
| | Perform a soft reset. More...
|
| |
| void | faGClear () |
| | Perform a soft reset of all initialized fADC250s. More...
|
| |
| void | faClearError (int id) |
| | Clear latched errors. More...
|
| |
| void | faGClearError () |
| | Clear latched errors of all initialized fADC250s. More...
|
| |
| void | faReset (int id, int iFlag) |
| | Perform a hard reset. More...
|
| |
| void | faGReset (int iFlag) |
| | Perform a hard reset on all initialized fADC250s. More...
|
| |
| void | faSoftReset (int id, int cflag) |
| | Perform either a soft clear or soft reset. More...
|
| |
| void | faDACReset (int id) |
| | Perform a reset of the DAC chip. More...
|
| |
| void | faGDACReset () |
| | Perform a reset of the DAC chip for all initialized modules. More...
|
| |
| void | faResetToken (int id) |
| | Reset the token. More...
|
| |
| int | faTokenStatus (int id) |
| | Return the status of the token. More...
|
| |
| int | faGTokenStatus () |
| | Return the slotmask of those modules that have the token. More...
|
| |
| unsigned int | faGetTokenStatus (int pflag) |
| | Return slot mask of modules with token. More...
|
| |
| void | faSetCalib (int id, unsigned short sdelay, unsigned short tdelay) |
| | Set the SyncReset and Trigger Delay. More...
|
| |
| int | faSetChannelDisable (int id, int channel) |
| | Disable the specified channel. More...
|
| |
| void | faChanDisable (int id, unsigned short cmask) |
| | Disable all channels in the specified mask. More...
|
| |
| int | faSetChannelDisableMask (int id, unsigned short cmask) |
| | Disable all channels in the specified mask. More...
|
| |
| int | faSetChannelEnable (int id, int channel) |
| | Enable the specified channel. More...
|
| |
| int | faSetChannelEnableMask (int id, unsigned short enMask) |
| | Enable all channels in the specified mask. More...
|
| |
| int | faGetChannelMask (int id, int type) |
| | Get the Enabled/Disabled Channel Mask. More...
|
| |
| void | faEnableSyncSrc (int id) |
| | Enabled the SyncReset source. More...
|
| |
| void | faGEnableSyncSrc () |
| | Enable the SyncReset Source of all initialized fADC250s. More...
|
| |
| void | faEnable (int id, int eflag, int bank) |
| | Enable data acquisition, trigger, and SyncReset on the module. More...
|
| |
| void | faGEnable (int eflag, int bank) |
| | Enable data acquisition, trigger, and SyncReset on all initialized fADC250s. More...
|
| |
| void | faDisable (int id, int eflag) |
| | Disable data acquisition, triggers, and SyncReset on the module. More...
|
| |
| void | faGDisable (int eflag) |
| | Disable data acquisition, triggers, and SyncReset on all initialized fADC250s. More...
|
| |
| void | faTrig (int id) |
| | Pulse a software trigger to the module. More...
|
| |
| void | faGTrig () |
| | Pulse a software trigger to all initialized fADC250s. More...
|
| |
| void | faTrig2 (int id) |
| | Pulse a software playback trigger to the module. More...
|
| |
| void | faGTrig2 () |
| | Pulse a software playback trigger to all initialized fADC250s. More...
|
| |
| int | faSetTrig21Delay (int id, int delay) |
| | Configure the delay between the software playback trigger and trigger. More...
|
| |
| int | faGetTrig21Delay (int id) |
| | Return the value of the delay between the software playback trigger and trigger. More...
|
| |
| int | faEnableInternalPlaybackTrigger (int id) |
| | Enable the software playback trigger and trigger. More...
|
| |
| void | faSync (int id) |
| | Pulse a software SyncReset. More...
|
| |
| int | faDready (int id, int dflag) |
| | Return Event/Block count. More...
|
| |
| int | faBready (int id) |
| | Return a Block Ready status. More...
|
| |
| unsigned int | faGBready () |
| | Return a Block Ready status mask for all initialized fADC250s. More...
|
| |
| unsigned int | faGBlockReady (unsigned int slotmask, int nloop) |
| | Return a Block Ready status mask for fADCs indicated in supplied slotmask. More...
|
| |
| unsigned int | faScanMask () |
| | Return the vme slot mask of all initialized fADC250s. More...
|
| |
| int | faBusyLevel (int id, unsigned int val, int bflag) |
| | Set/Readback Busy Level. More...
|
| |
| int | faBusy (int id) |
| | Get the busy status. More...
|
| |
| void | faEnableSoftTrig (int id) |
| | Enable software triggers. More...
|
| |
| void | faGEnableSoftTrig () |
| | Enable Software Triggers for all initialized fADC250s. More...
|
| |
| void | faDisableSoftTrig (int id) |
| | Disable Software Triggers. More...
|
| |
| void | faEnableSoftSync (int id) |
| | Enable Software SyncReset. More...
|
| |
| void | faDisableSoftSync (int id) |
| | Disable Software SyncReset. More...
|
| |
| void | faEnableClk (int id) |
| | Enable the internal clock. More...
|
| |
| void | faDisableClk (int id) |
| | Disable the internal clock. More...
|
| |
| void | faEnableTriggerOut (int id, int output) |
| | Enable trigger out for front panel or p0. More...
|
| |
| void | faEnableBusError (int id) |
| | Enable bus errors to terminate a block transfer. More...
|
| |
| void | faGEnableBusError () |
| | Enable bus errors to terminate a block transfer for all initialized fADC250s. More...
|
| |
| void | faDisableBusError (int id) |
| | Disable bus errors. More...
|
| |
| void | faEnableMultiBlock (int tflag) |
| | Enable and setup multiblock transfers for all initialized fADC250s. More...
|
| |
| void | faDisableMultiBlock () |
| | Disable multiblock transfer for all initialized fADC250s. More...
|
| |
| int | faSetBlockLevel (int id, int level) |
| | Set the block level for the module. More...
|
| |
| void | faGSetBlockLevel (int level) |
| | Set the block level for all initialized fADC250s. More...
|
| |
| int | faSetClkSource (int id, int source) |
| | Set the Clock Source for the module. More...
|
| |
| int | faSetTrigSource (int id, int source) |
| | Set the trigger source for the module. More...
|
| |
| int | faSetSyncSource (int id, int source) |
| | Set the SyncReset source for the module. More...
|
| |
| void | faEnableFP (int id) |
| | Enable Front Panel Inputs. More...
|
| |
| int | faSetTrigOut (int id, int trigout) |
| | Set trigger output options. More...
|
| |
| int | faResetTriggerCount (int id) |
| | Reset the trigger count for the module. More...
|
| |
| int | faCheckThreshold (int id) |
| | Check and make sure readout threshold for each channel is non zero. More...
|
| |
| int | faSetThreshold (int id, unsigned short tvalue, unsigned short chmask) |
| | Set the readout threshold value for specified channel mask. More...
|
| |
| int | faPrintThreshold (int id) |
| | Print the thresholds of all channels to standard out. More...
|
| |
| int | faProcPedConfig (int id, int nsamples, int maxvalue) |
| | Configure pedestal parameters to be used by processing algorythm. More...
|
| |
| int | faGProcPedConfig (int nsamples, int maxvalue) |
| | Configure pedestal parameters to be used by processing algorythm for all initialized modules. More...
|
| |
| int | faSampleConfig (int id, int nsamples, int maxvalue) |
| | Configure output of sample data from . More...
|
| |
| int | faGSampleConfig (int nsamples, int maxvalue) |
| | Configure output of sample data from for all initialized modules. More...
|
| |
| int | faReadAllChannelSamples (int id, volatile unsigned int *data) |
| | Read the current sample data from the specified channel and module. More...
|
| |
| int | faSetDAC (int id, unsigned short dvalue, unsigned short chmask) |
| | Set the DAC value of the specified channel mask. More...
|
| |
| int | faSetDACandCheck (int id, unsigned short dvalue, unsigned short chmask) |
| | Set the DAC value of the specified channel mask and readback and check that it was written properly. More...
|
| |
| void | faPrintDAC (int id) |
| | Print DAC values for each channel to standard out. More...
|
| |
| int | faGetDAC (int id, unsigned short *indata) |
| | Readback the DAC values currently used by the module in the specified slot. More...
|
| |
| int | faGetChannelDAC (int id, int channel) |
| | Readback the DAC for a specific channel by the module in the specified slot. More...
|
| |
| int | faSetChannelPedestal (int id, unsigned int chan, unsigned int ped) |
| | Set the pedestal value of specified channel. More...
|
| |
| int | faGetChannelPedestal (int id, unsigned int chan) |
| | Get the pedestal value of specified channel. More...
|
| |
| int | faSetMGTTestMode (int id, unsigned int mode) |
| | Set the fa250 operation when Sync Reset is received. More...
|
| |
| int | faSetAlignmentDebugMode (int enable) |
| | Enable/Disable the alignment sequence that is sent to the CTP for debugging. More...
|
| |
| int | faGetAlignmentDebugMode () |
| | Return whether or not the module will send the alignment sequence to the CTP. More...
|
| |
| int | faSetHitbitsMode (int id, int enable) |
| | Enable/Disable Hitbits mode on the module. More...
|
| |
| void | faGSetHitbitsMode (int enable) |
| | Enable/Disable Hitbits mode for all initialized fADC250s. More...
|
| |
| int | faGetHitbitsMode (int id) |
| | Get the enabled/disabled status of hitbits mode for the module. More...
|
| |
| int | faReadScalers (int id, volatile unsigned int *data, unsigned int chmask, int rflag) |
| | Scaler Data readout routine. More...
|
| |
| int | faPrintScalers (int id, int rflag) |
| | Scaler Print Out routine. More...
|
| |
| int | faClearScalers (int id) |
| | Clear the scalers (and enable, if disabled) More...
|
| |
| int | faLatchScalers (int id) |
| | Latch the current scaler count. More...
|
| |
| int | faEnableScalers (int id) |
| | Enable the scalers to count. More...
|
| |
| int | faDisableScalers (int id) |
| | Disable counting in the scalers. More...
|
| |
| unsigned int | faGetA32 (int id) |
| | Return the base address of the A32 for specified module. More...
|
| |
| unsigned int | faGetA32M () |
| | Return the base address of the A32 Multiblock. More...
|
| |
| unsigned int | faGetMinA32MB (int id) |
| | Get the minimum address used for multiblock. More...
|
| |
| unsigned int | faGetMaxA32MB (int id) |
| | Get the maximum address used for multiblock. More...
|
| |
| int | faDataInsertAdcParameters (int id, int enable) |
| | Insert ADC parameter word into datastream. The data word appears as a block header continuation word. More...
|
| |
| void | faGDataInsertAdcParameters (int enable) |
| | Insert ADC parameter word into datastream. For all initialized modules. The data word appears as a block header continuation word. More...
|
| |
| int | faDataSuppressTriggerTime (int id, int suppress) |
| | Enable/Disable suppression of one or both of the trigger time words in the data stream. More...
|
| |
| void | faGDataSuppressTriggerTime (int suppress) |
| | Enable/Disable suppression of one or both of the trigger time words in the data stream for all initialized modules. More...
|
| |
| int | faSetDataFormat (int id, int format) |
| | Set the readout data form which allows for suppression of repetitious data words. More...
|
| |
| void | faGSetDataFormat (int format) |
| | Set the readout data form for all initialized modules. More...
|
| |
| unsigned int | faGetCtrlFPGAData (int id) |
| | Return raw register data from the Control FPGA containing the temperature, core voltage, and auxiliary voltage. More...
|
| |
| unsigned int | faGetProcFPGAData (int id) |
| | Return raw register data from the Processing FPGA containing the temperature. More...
|
| |
| float | faGetCtrlFPGATemp (int id, int pflag) |
| | Return the value of the Control FPGA temperature (in degrees Celsius) More...
|
| |
| float | faGetCtrlFPGAVoltage (int id, int vtype, int pflag) |
| | Return the value of specified Control FPGA voltage. More...
|
| |
| float | faGetProcFPGATemp (int id, int pflag) |
| | Return the value of the Processing FPGA temperature (in degrees Celsius) More...
|
| |
| void | faPrintAuxScal (int id) |
| | Print to standard out some auxillary scalers. More...
|
| |
| void | faPrintFifoStatus (int id) |
| | Print the status of the FIFO to standard out. More...
|
| |
| void | faDataDecode (unsigned int data) |
| | Decode a data word from an fADC250 and print to standard out. More...
|
| |
| void | faTestSetSystemTestMode (int id, int mode) |
| | Enable/Disable System test mode. More...
|
| |
| void | faTestSetTrigOut (int id, int mode) |
| | Set the level of Trig Out to the SD. More...
|
| |
| void | faTestSetBusyOut (int id, int mode) |
| | Set the level of Busy Out to the SD. More...
|
| |
| void | faTestSetSdLink (int id, int mode) |
| | Set the level of the SD Link. More...
|
| |
| void | faTestSetTokenOut (int id, int mode) |
| | Set the level of Token Out to the SD. More...
|
| |
| int | faTestGetStatBitB (int id) |
| | Get the level of the StatBitB to the SD. More...
|
| |
| int | faTestGetTokenIn (int id) |
| | Get the level of the Token In from the SD. More...
|
| |
| int | faTestGetClock250CounterStatus (int id) |
| | Return the status of the 250Mhz Clock Counter. More...
|
| |
| unsigned int | faTestGetClock250Counter (int id) |
| | Return the value of the 250Mhz Clock scaler. More...
|
| |
| unsigned int | faTestGetSyncCounter (int id) |
| | Return the value of the SyncReset scaler. More...
|
| |
| unsigned int | faTestGetTrig1Counter (int id) |
| | Return the value of the trig1 scaler. More...
|
| |
| unsigned int | faTestGetTrig2Counter (int id) |
| | Return the value of the trig2 scaler. More...
|
| |
| void | faTestResetClock250Counter (int id) |
| | Reset the counter of the 250MHz Clock scaler. More...
|
| |
| void | faTestResetSyncCounter (int id) |
| | Reset the counter of the SyncReset scaler. More...
|
| |
| void | faTestResetTrig1Counter (int id) |
| | Reset the counter of the trig1 scaler. More...
|
| |
| void | faTestResetTrig2Counter (int id) |
| | Reset the counter of the trig2 scaler. More...
|
| |
| unsigned int | faTestGetTestBitReg (int id) |
| | Return the current value of the testBit register. More...
|
| |
| int | faGetSerialNumber (int id, char **rval, int snfix) |
| | Fills 'rval' with a character array containing the fa250 serial number. More...
|
| |
| int | faSetScalerBlockInterval (int id, unsigned int nblock) |
| | Set the block interval of scaler data insertion. More...
|
| |
| int | faGetScalerBlockInterval (int id) |
| |
| int | faForceEndOfBlock (int id, int scalers) |
| | Allows for the insertion of a block trailer into the data stream. More...
|
| |
| void | faGForceEndOfBlock (int scalers) |
| | Allows for the insertion of a block trailer into the data stream for all initialized fADC250s. More...
|
| |
| int | faSetHistoryBufferThreshold (int id, int thres) |
| | Set the threshold to trigger for the history buffer to be saved for readout. More...
|
| |
| void | faGSetHistoryBufferThreshold (int thres) |
| | Set the threshold to trigger for the history buffer to be saved for readout for all initialized fADC250s. More...
|
| |
| int | faGetHistoryBufferThreshold (int id) |
| | Get the history buffer threshold. More...
|
| |
| int | faArmHistoryBuffer (int id) |
| | Enable the history buffer for data acquisition for the module. More...
|
| |
| void | faGArmHistoryBuffer () |
| | Enable the history buffer for data acquisition for all initialized fADC250s. More...
|
| |
| int | faHistoryBufferDReady (int id) |
| | Return whether or not the history buffer has been triggered. More...
|
| |
| int | faReadHistoryBuffer (int id, volatile unsigned int *data, int nwrds) |
| | Read out history buffer from the module. More...
|
| |
| int | faStateArmBuffer (int id, int enable) |
| | Enable/Disable Buffer to store state machine diagnostics. More...
|
| |
| int | faStateReadBuffer (int id, volatile unsigned int *data, int nwords) |
| | Read state machine buffer. More...
|
| |
| int | faStateMap (unsigned int state_value) |
| | Convert state value to mapped identifier. More...
|
| |
| int | faStatePrintBuffer (int id) |
| | Print the contents of the State Machine buffer to standard out. More...
|
| |
| int | faSDC_Config (unsigned short cFlag, unsigned short bMask) |
| | Configure the Signal Distribution Card (SDC) More...
|
| |
| void | faSDC_Status (int sFlag) |
| | Print status of SDC to standard out. More...
|
| |
| void | faSDC_Enable (int nsync) |
| | Enable Triggers and/or SyncReset on the SDC. More...
|
| |
| void | faSDC_Disable () |
| | Disable Triggers and SyncReset on the SDC. More...
|
| |
| void | faSDC_Sync () |
| | Perform a SyncReset from the SDC. More...
|
| |
| void | faSDC_Trig () |
| | Perform a trigger pulse from the SDC. More...
|
| |
| int | faSDC_Busy () |
| | Return Busy status of the SDC. More...
|
| |
1.8.13