Base64

java.lang.Object
- org.jlab.coda.cMsg.common.Base64

```
public class Base64
extends java.lang.Object
```
Implements Base64 encoding and decoding as defined by RFC 2045: "Multipurpose Internet Mail Extensions (MIME) Part One: Format of Internet Message Bodies" page 23. More information about this class is available from ostermiller.org.
The Base64 Content-Transfer-Encoding is designed to represent arbitrary sequences of octets in a form that need not be humanly readable. The encoding and decoding algorithms are simple, but the encoded data are consistently only about 33 percent larger than the unencoded data. This encoding is virtually identical to the one used in Privacy Enhanced Mail (PEM) applications, as defined in RFC 1421.

A 65-character subset of US-ASCII is used, enabling 6 bits to be represented per printable character. (The extra 65th character, "=", is used to signify a special processing function.)

NOTE: This subset has the important property that it is represented identically in all versions of ISO 646, including US-ASCII, and all characters in the subset are also represented identically in all versions of EBCDIC. Other popular encodings, such as the encoding used by the uuencode utility, Macintosh binhex 4.0 [RFC-1741], and the base85 encoding specified as part of Level 2 PostScript, do not share these properties, and thus do not fulfill the portability requirements a binary transport encoding for mail must meet.

The encoding process represents 24-bit groups of input bits as output strings of 4 encoded characters. Proceeding from left to right, a 24-bit input group is formed by concatenating 3 8bit input groups. These 24 bits are then treated as 4 concatenated 6-bit groups, each of which is translated into a single digit in the base64 alphabet. When encoding a bit stream via the base64 encoding, the bit stream must be presumed to be ordered with the most-significant-bit first. That is, the first bit in the stream will be the high-order bit in the first 8bit byte, and the eighth bit will be the low-order bit in the first 8bit byte, and so on.

Each 6-bit group is used as an index into an array of 64 printable characters. The character referenced by the index is placed in the output string. These characters, identified in Table 1, below, are selected so as to be universally representable, and the set excludes characters with particular significance to SMTP (e.g., ".", CR, LF) and to the multipart boundary delimiters defined in RFC 2046 (e.g., "-").
```
                  Table 1: The Base64 Alphabet

   Value Encoding  Value Encoding  Value Encoding  Value Encoding
       0 A            17 R            34 i            51 z
       1 B            18 S            35 j            52 0
       2 C            19 T            36 k            53 1
       3 D            20 U            37 l            54 2
       4 E            21 V            38 m            55 3
       5 F            22 W            39 n            56 4
       6 G            23 X            40 o            57 5
       7 H            24 Y            41 p            58 6
       8 I            25 Z            42 q            59 7
       9 J            26 a            43 r            60 8
      10 K            27 b            44 s            61 9
      11 L            28 c            45 t            62 +
      12 M            29 d            46 u            63 /
      13 N            30 e            47 v
      14 O            31 f            48 w         (pad) =
      15 P            32 g            49 x
      16 Q            33 h            50 y
 
```
The encoded output stream must be represented in lines of no more than 76 characters each. All line breaks or other characters not found in Table 1 must be ignored by decoding software. In base64 data, characters other than those in Table 1, line breaks, and other white space probably indicate a transmission error, about which a warning message or even a message rejection might be appropriate under some circumstances.

Special processing is performed if fewer than 24 bits are available at the end of the data being encoded. A full encoding quantum is always completed at the end of a body. When fewer than 24 input bits are available in an input group, zero bits are added (on the right) to form an integral number of 6-bit groups. Padding at the end of the data is performed using the "=" character. Since all base64 input is an integral number of octets, only the following cases can arise: (1) the final quantum of encoding input is an integral multiple of 24 bits; here, the final unit of encoded output will be an integral multiple of 4 characters with no "=" padding, (2) the final quantum of encoding input is exactly 8 bits; here, the final unit of encoded output will be two characters followed by two "=" padding characters, or (3) the final quantum of encoding input is exactly 16 bits; here, the final unit of encoded output will be three characters followed by one "=" padding character.

Because it is used only for padding at the end of the data, the occurrence of any "=" characters may be taken as evidence that the end of the data has been reached (without truncation in transit). No such assurance is possible, however, when the number of octets transmitted was a multiple of three and no "=" characters are present.

Any characters outside of the base64 alphabet are to be ignored in base64-encoded data.

Care must be taken to use the proper octets for line breaks if base64 encoding is applied directly to text material that has not been converted to canonical form. In particular, text line breaks must be converted into CRLF sequences prior to base64 encoding. The important thing to note is that this may be done directly by the encoder rather than in a prior canonization step in some implementations.

NOTE: There is no need to worry about quoting potential boundary delimiters within base64-encoded bodies within multipart entities because no hyphen characters are used in the base64 encoding.
Since:

ostermillerutils 1.00.00

Author:

Stephen Ostermiller http://ostermiller.org/contact.pl?regarding=Java+Utilities

Field Summary

Fields
Modifier and Type	Field and Description
`protected static byte[]`	`base64Chars` Table of the sixty-four characters that are used as the Base64 alphabet: [A-Za-z0-9+/]
`protected static byte[]`	`reverseBase64Chars` Reverse lookup table for the Base64 alphabet.
`static java.lang.String`	`version` Version number of this program

Method Summary

All Methods Static Methods Concrete Methods
Modifier and Type	Method and Description
`static byte[]`	`decode(byte[] bytes)` Decode Base64 encoded bytes.
`static void`	`decode(byte[] bytes, java.io.OutputStream out)` Decode Base64 encoded bytes to the an OutputStream.
`static void`	`decode(java.io.File fIn)` Decode Base64 encoded data from one file to the other.
`static void`	`decode(java.io.File fIn, boolean throwExceptions)` Decode Base64 encoded data from one file to the other.
`static void`	`decode(java.io.File fIn, java.io.File fOut)` Decode Base64 encoded data from one file to the other.
`static void`	`decode(java.io.File fIn, java.io.File fOut, boolean throwExceptions)` Decode Base64 encoded data from one file to the other.
`static void`	`decode(java.io.InputStream in, java.io.OutputStream out)` Decode Base64 encoded data from the InputStream to the OutputStream.
`static void`	`decode(java.io.InputStream in, java.io.OutputStream out, boolean throwExceptions)` Decode Base64 encoded data from the InputStream to the OutputStream.
`static java.lang.String`	`decode(java.lang.String string)` Decode a Base64 encoded String.
`static java.lang.String`	`decode(java.lang.String string, java.lang.String enc)` Decode a Base64 encoded String.
`static java.lang.String`	`decode(java.lang.String string, java.lang.String encIn, java.lang.String encOut)` Decode a Base64 encoded String.
`static byte[]`	`decodeToBytes(byte[] bytes)` Decode Base64 encoded bytes.
`static byte[]`	`decodeToBytes(java.io.InputStream in)` Decode Base64 encoded data from the InputStream to a byte array.
`static byte[]`	`decodeToBytes(java.lang.String string)` Decode a Base64 encoded String.
`static byte[]`	`decodeToBytes(java.lang.String string, java.lang.String enc)` Decode a Base64 encoded String.
`static void`	`decodeToStream(byte[] bytes, java.io.OutputStream out)` Decode Base64 encoded bytes to the an OutputStream.
`static void`	`decodeToStream(java.lang.String string, java.io.OutputStream out)` Decode a Base64 encoded String to an OutputStream.
`static void`	`decodeToStream(java.lang.String string, java.lang.String enc, java.io.OutputStream out)` Decode a Base64 encoded String to an OutputStream.
`static java.lang.String`	`decodeToString(byte[] bytes)` Decode Base64 encoded bytes.
`static java.lang.String`	`decodeToString(byte[] bytes, java.lang.String enc)` Decode Base64 encoded bytes.
`static java.lang.String`	`decodeToString(java.io.InputStream in)` Decode Base64 encoded data from the InputStream to a String.
`static java.lang.String`	`decodeToString(java.io.InputStream in, java.lang.String enc)` Decode Base64 encoded data from the InputStream to a String.
`static java.lang.String`	`decodeToString(java.lang.String string)` Decode a Base64 encoded String.
`static java.lang.String`	`decodeToString(java.lang.String string, java.lang.String enc)` Decode a Base64 encoded String.
`static java.lang.String`	`decodeToString(java.lang.String string, java.lang.String encIn, java.lang.String encOut)` Decode a Base64 encoded String.
`static byte[]`	`encode(byte[] bytes)` Encode bytes in Base64.
`static byte[]`	`encode(byte[] bytes, boolean lineBreaks)` Encode bytes in Base64.
`static byte[]`	`encode(byte[] bytes, int offset, int length, boolean lineBreaks)` Encode bytes in Base64.
`static void`	`encode(java.io.File fIn)` Encode this file in Base64.
`static void`	`encode(java.io.File fIn, boolean lineBreaks)` Encode this file in Base64.
`static void`	`encode(java.io.File fIn, java.io.File fOut)` Encode this file in Base64.
`static void`	`encode(java.io.File fIn, java.io.File fOut, boolean lineBreaks)` Encode this file in Base64.
`static void`	`encode(java.io.InputStream in, java.io.OutputStream out)` Encode data from the InputStream to the OutputStream in Base64.
`static void`	`encode(java.io.InputStream in, java.io.OutputStream out, boolean lineBreaks)` Encode data from the InputStream to the OutputStream in Base64.
`static java.lang.String`	`encode(java.lang.String string)` Encode a String in Base64.
`static java.lang.String`	`encode(java.lang.String string, java.lang.String enc)` Encode a String in Base64.
`static java.lang.String`	`encodeToString(byte[] bytes)` Encode bytes in Base64.
`static java.lang.String`	`encodeToString(byte[] bytes, boolean lineBreaks)` Encode bytes in Base64.
`static java.lang.String`	`encodeToString(byte[] bytes, int offset, int length, boolean lineBreaks)` Encode bytes in Base64.
`static boolean`	`isBase64(byte[] bytes)` Determines if the byte array is in base64 format.
`static boolean`	`isBase64(java.io.File fIn)` Determines if the File is in base64 format.
`static boolean`	`isBase64(java.io.InputStream in)` Reads data from the stream and determines if it is in base64 format.
`static boolean`	`isBase64(java.lang.String string)` Determines if the String is in base64 format.
`static boolean`	`isBase64(java.lang.String string, java.lang.String enc)` Determines if the String is in base64 format.

Methods inherited from class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

- Field Detail
  - base64Chars
```
protected static final byte[] base64Chars
```
    Table of the sixty-four characters that are used as the Base64 alphabet: [A-Za-z0-9+/]
    
    Since:
    
    ostermillerutils 1.00.00
  - reverseBase64Chars
```
protected static final byte[] reverseBase64Chars
```
    Reverse lookup table for the Base64 alphabet. reversebase64Chars[byte] gives n for the nth Base64 character or negative if a character is not a Base64 character.
    
    Since:
    
    ostermillerutils 1.00.00
  - version
```
public static final java.lang.String version
```
    Version number of this program
    
    Since:
    
    ostermillerutils 1.00.00
    
    See Also:
    
    Constant Field Values
- Method Detail
  - encode
```
public static java.lang.String encode(java.lang.String string)
```
    Encode a String in Base64. The String is converted to and from bytes according to the platform's default character encoding. No line breaks or other white space are inserted into the encoded data.
    
    Parameters:
    
    string - The data to encode.
    
    Returns:
    
    An encoded String.
    
    Since:
    
    ostermillerutils 1.00.00
  - encode
```
public static java.lang.String encode(java.lang.String string,
                                      java.lang.String enc)
                               throws java.io.UnsupportedEncodingException
```
    Encode a String in Base64. No line breaks or other white space are inserted into the encoded data.
    
    Parameters:
    
    string - The data to encode.
    
    enc - Character encoding to use when converting to and from bytes.
    
    Returns:
    
    An encoded String.
    
    Throws:
    
    java.io.UnsupportedEncodingException - if the character encoding specified is not supported.
    
    Since:
    
    ostermillerutils 1.00.00
  - encodeToString
```
public static java.lang.String encodeToString(byte[] bytes)
```
    Encode bytes in Base64. No line breaks or other white space are inserted into the encoded data.
    
    Parameters:
    
    bytes - The data to encode.
    
    Returns:
    
    String with Base64 encoded data.
    
    Since:
    
    ostermillerutils 1.04.00
  - encodeToString
```
public static java.lang.String encodeToString(byte[] bytes,
                                              int offset,
                                              int length,
                                              boolean lineBreaks)
```
    Encode bytes in Base64.
    
    Parameters:
    
    bytes - The data to encode.
    
    offset - Index into the data array.
    
    length - Length (# of bytes) of the data to encode.
    
    lineBreaks - Whether to insert line breaks every 76 characters in the output.
    
    Returns:
    
    String with Base64 encoded data.
    
    Since:
    
    ostermillerutils 1.04.00
  - encodeToString
```
public static java.lang.String encodeToString(byte[] bytes,
                                              boolean lineBreaks)
```
    Encode bytes in Base64.
    
    Parameters:
    
    bytes - The data to encode.
    
    lineBreaks - Whether to insert line breaks every 76 characters in the output.
    
    Returns:
    
    String with Base64 encoded data.
    
    Since:
    
    ostermillerutils 1.04.00
  - encode
```
public static byte[] encode(byte[] bytes)
```
    Encode bytes in Base64. No line breaks or other white space are inserted into the encoded data.
    
    Parameters:
    
    bytes - The data to encode.
    
    Returns:
    
    Encoded bytes.
    
    Since:
    
    ostermillerutils 1.00.00
  - encode
```
public static byte[] encode(byte[] bytes,
                            int offset,
                            int length,
                            boolean lineBreaks)
```
    Encode bytes in Base64.
    
    Parameters:
    
    bytes - The data to encode.
    
    offset - Index into the data array.
    
    length - Length (# of bytes) of the data to encode.
    
    lineBreaks - Whether to insert line breaks every 76 characters in the output.
    
    Returns:
    
    Encoded bytes.
    
    Since:
    
    ostermillerutils 1.04.00
  - encode
```
public static byte[] encode(byte[] bytes,
                            boolean lineBreaks)
```
    Encode bytes in Base64.
    
    Parameters:
    
    bytes - The data to encode.
    
    lineBreaks - Whether to insert line breaks every 76 characters in the output.
    
    Returns:
    
    Encoded bytes.
    
    Since:
    
    ostermillerutils 1.04.00
  - encode
```
public static void encode(java.io.File fIn)
                   throws java.io.IOException
```
    Encode this file in Base64. Line breaks will be inserted every 76 characters.
    
    Parameters:
    
    fIn - File to be encoded (will be overwritten).
    
    Throws:
    
    java.io.IOException - if an input or output error occurs.
    
    Since:
    
    ostermillerutils 1.00.00
  - encode
```
public static void encode(java.io.File fIn,
                          boolean lineBreaks)
                   throws java.io.IOException
```
    Encode this file in Base64.
    
    Parameters:
    
    fIn - File to be encoded (will be overwritten).
    
    lineBreaks - Whether to insert line breaks every 76 characters in the output.
    
    Throws:
    
    java.io.IOException - if an input or output error occurs.
    
    Since:
    
    ostermillerutils 1.00.00
  - encode
```
public static void encode(java.io.File fIn,
                          java.io.File fOut)
                   throws java.io.IOException
```
    Encode this file in Base64. Line breaks will be inserted every 76 characters.
    
    Parameters:
    
    fIn - File to be encoded.
    
    fOut - File to which the results should be written (may be the same as fIn).
    
    Throws:
    
    java.io.IOException - if an input or output error occurs.
    
    Since:
    
    ostermillerutils 1.00.00
  - encode
```
public static void encode(java.io.File fIn,
                          java.io.File fOut,
                          boolean lineBreaks)
                   throws java.io.IOException
```
    Encode this file in Base64.
    
    Parameters:
    
    fIn - File to be encoded.
    
    fOut - File to which the results should be written (may be the same as fIn).
    
    lineBreaks - Whether to insert line breaks every 76 characters in the output.
    
    Throws:
    
    java.io.IOException - if an input or output error occurs.
    
    Since:
    
    ostermillerutils 1.00.00
  - encode
```
public static void encode(java.io.InputStream in,
                          java.io.OutputStream out)
                   throws java.io.IOException
```
    Encode data from the InputStream to the OutputStream in Base64. Line breaks are inserted every 76 characters in the output.
    
    Parameters:
    
    in - Stream from which to read data that needs to be encoded.
    
    out - Stream to which to write encoded data.
    
    Throws:
    
    java.io.IOException - if there is a problem reading or writing.
    
    Since:
    
    ostermillerutils 1.00.00
  - encode
```
public static void encode(java.io.InputStream in,
                          java.io.OutputStream out,
                          boolean lineBreaks)
                   throws java.io.IOException
```
    Encode data from the InputStream to the OutputStream in Base64.
    
    Parameters:
    
    in - Stream from which to read data that needs to be encoded.
    
    out - Stream to which to write encoded data.
    
    lineBreaks - Whether to insert line breaks every 76 characters and at end in the output.
    
    Throws:
    
    java.io.IOException - if there is a problem reading or writing.
    
    Since:
    
    ostermillerutils 1.00.00
  - decode
```
public static java.lang.String decode(java.lang.String string)
```
    Decode a Base64 encoded String. Characters that are not part of the Base64 alphabet are ignored in the input. The String is converted to and from bytes according to the platform's default character encoding.
    
    Parameters:
    
    string - The data to decode.
    
    Returns:
    
    A decoded String.
    
    Since:
    
    ostermillerutils 1.00.00
  - decode
```
public static java.lang.String decode(java.lang.String string,
                                      java.lang.String enc)
                               throws java.io.UnsupportedEncodingException
```
    Decode a Base64 encoded String. Characters that are not part of the Base64 alphabet are ignored in the input.
    
    Parameters:
    
    string - The data to decode.
    
    enc - Character encoding to use when converting to and from bytes.
    
    Returns:
    
    A decoded String.
    
    Throws:
    
    java.io.UnsupportedEncodingException - if the character encoding specified is not supported.
    
    Since:
    
    ostermillerutils 1.00.00
  - decode
```
public static java.lang.String decode(java.lang.String string,
                                      java.lang.String encIn,
                                      java.lang.String encOut)
                               throws java.io.UnsupportedEncodingException
```
    Decode a Base64 encoded String. Characters that are not part of the Base64 alphabet are ignored in the input.
    
    Parameters:
    
    string - The data to decode.
    
    encIn - Character encoding to use when converting input to bytes (should not matter because Base64 data is designed to survive most character encodings)
    
    encOut - Character encoding to use when converting decoded bytes to output.
    
    Returns:
    
    A decoded String.
    
    Throws:
    
    java.io.UnsupportedEncodingException - if the character encoding specified is not supported.
    
    Since:
    
    ostermillerutils 1.00.00
  - decodeToString
```
public static java.lang.String decodeToString(java.lang.String string)
```
    Decode a Base64 encoded String. Characters that are not part of the Base64 alphabet are ignored in the input. The String is converted to and from bytes according to the platform's default character encoding.
    
    Parameters:
    
    string - The data to decode.
    
    Returns:
    
    A decoded String.
    
    Since:
    
    ostermillerutils 1.02.16
  - decodeToString
```
public static java.lang.String decodeToString(java.lang.String string,
                                              java.lang.String enc)
                                       throws java.io.UnsupportedEncodingException
```
    Decode a Base64 encoded String. Characters that are not part of the Base64 alphabet are ignored in the input.
    
    Parameters:
    
    string - The data to decode.
    
    enc - Character encoding to use when converting to and from bytes.
    
    Returns:
    
    A decoded String.
    
    Throws:
    
    java.io.UnsupportedEncodingException - if the character encoding specified is not supported.
    
    Since:
    
    ostermillerutils 1.02.16
  - decodeToString
```
public static java.lang.String decodeToString(java.lang.String string,
                                              java.lang.String encIn,
                                              java.lang.String encOut)
                                       throws java.io.UnsupportedEncodingException
```
    Decode a Base64 encoded String. Characters that are not part of the Base64 alphabet are ignored in the input.
    
    Parameters:
    
    string - The data to decode.
    
    encIn - Character encoding to use when converting input to bytes (should not matter because Base64 data is designed to survive most character encodings)
    
    encOut - Character encoding to use when converting decoded bytes to output.
    
    Returns:
    
    A decoded String.
    
    Throws:
    
    java.io.UnsupportedEncodingException - if the character encoding specified is not supported.
    
    Since:
    
    ostermillerutils 1.02.16
  - decodeToStream
```
public static void decodeToStream(java.lang.String string,
                                  java.io.OutputStream out)
                           throws java.io.IOException
```
    Decode a Base64 encoded String to an OutputStream. Characters that are not part of the Base64 alphabet are ignored in the input. The String is converted from bytes according to the platform's default character encoding.
    
    Parameters:
    
    string - The data to decode.
    
    out - Stream to which to write decoded data.
    
    Throws:
    
    java.io.IOException - if an IO error occurs.
    
    Since:
    
    ostermillerutils 1.02.16
  - decodeToStream
```
public static void decodeToStream(java.lang.String string,
                                  java.lang.String enc,
                                  java.io.OutputStream out)
                           throws java.io.UnsupportedEncodingException,
                                  java.io.IOException
```
    Decode a Base64 encoded String to an OutputStream. Characters that are not part of the Base64 alphabet are ignored in the input.
    
    Parameters:
    
    string - The data to decode.
    
    enc - Character encoding to use when converting to and from bytes.
    
    out - Stream to which to write decoded data.
    
    Throws:
    
    java.io.UnsupportedEncodingException - if the character encoding specified is not supported.
    
    java.io.IOException - if an IO error occurs.
    
    Since:
    
    ostermillerutils 1.02.16
  - decodeToBytes
```
public static byte[] decodeToBytes(java.lang.String string)
```
    Decode a Base64 encoded String. Characters that are not part of the Base64 alphabet are ignored in the input. The String is converted from bytes according to the platform's default character encoding.
    
    Parameters:
    
    string - The data to decode.
    
    Returns:
    
    decoded data.
    
    Since:
    
    ostermillerutils 1.02.16
  - decodeToBytes
```
public static byte[] decodeToBytes(java.lang.String string,
                                   java.lang.String enc)
                            throws java.io.UnsupportedEncodingException
```
    Decode a Base64 encoded String. Characters that are not part of the Base64 alphabet are ignored in the input.
    
    Parameters:
    
    string - The data to decode.
    
    enc - Character encoding to use when converting from bytes.
    
    Returns:
    
    decoded data.
    
    Throws:
    
    java.io.UnsupportedEncodingException - if the character encoding specified is not supported.
    
    Since:
    
    ostermillerutils 1.02.16
  - decodeToString
```
public static java.lang.String decodeToString(byte[] bytes)
```
    Decode Base64 encoded bytes. Characters that are not part of the Base64 alphabet are ignored in the input. The String is converted to bytes according to the platform's default character encoding.
    
    Parameters:
    
    bytes - The data to decode.
    
    Returns:
    
    A decoded String.
    
    Since:
    
    ostermillerutils 1.02.16
  - decodeToString
```
public static java.lang.String decodeToString(byte[] bytes,
                                              java.lang.String enc)
                                       throws java.io.UnsupportedEncodingException
```
    Decode Base64 encoded bytes. Characters that are not part of the Base64 alphabet are ignored in the input.
    
    Parameters:
    
    bytes - The data to decode.
    
    enc - Character encoding to use when converting to and from bytes.
    
    Returns:
    
    A decoded String.
    
    Throws:
    
    java.io.UnsupportedEncodingException - if the character encoding specified is not supported.
    
    Since:
    
    ostermillerutils 1.02.16
  - decodeToBytes
```
public static byte[] decodeToBytes(byte[] bytes)
```
    Decode Base64 encoded bytes. Characters that are not part of the Base64 alphabet are ignored in the input.
    
    Parameters:
    
    bytes - The data to decode.
    
    Returns:
    
    Decoded bytes.
    
    Since:
    
    ostermillerutils 1.02.16
  - decode
```
public static byte[] decode(byte[] bytes)
```
    Decode Base64 encoded bytes. Characters that are not part of the Base64 alphabet are ignored in the input.
    
    Parameters:
    
    bytes - The data to decode.
    
    Returns:
    
    Decoded bytes.
    
    Since:
    
    ostermillerutils 1.00.00
  - decode
```
public static void decode(byte[] bytes,
                          java.io.OutputStream out)
                   throws java.io.IOException
```
    Decode Base64 encoded bytes to the an OutputStream. Characters that are not part of the Base64 alphabet are ignored in the input.
    
    Parameters:
    
    bytes - The data to decode.
    
    out - Stream to which to write decoded data.
    
    Throws:
    
    java.io.IOException - if an IO error occurs.
    
    Since:
    
    ostermillerutils 1.00.00
  - decodeToStream
```
public static void decodeToStream(byte[] bytes,
                                  java.io.OutputStream out)
                           throws java.io.IOException
```
    Decode Base64 encoded bytes to the an OutputStream. Characters that are not part of the Base64 alphabet are ignored in the input.
    
    Parameters:
    
    bytes - The data to decode.
    
    out - Stream to which to write decoded data.
    
    Throws:
    
    java.io.IOException - if an IO error occurs.
    
    Since:
    
    ostermillerutils 1.02.16
  - decode
```
public static void decode(java.io.File fIn)
                   throws java.io.IOException
```
    Decode Base64 encoded data from one file to the other. Characters in the Base64 alphabet, white space and equals sign are expected to be in urlencoded data. The presence of other characters could be a sign that the data is corrupted.
    
    Parameters:
    
    fIn - File to be decoded (will be overwritten).
    
    Throws:
    
    java.io.IOException - if an IO error occurs.
    
    Base64DecodingException - if unexpected data is encountered.
    
    Since:
    
    ostermillerutils 1.00.00
  - decode
```
public static void decode(java.io.File fIn,
                          boolean throwExceptions)
                   throws java.io.IOException
```
    Decode Base64 encoded data from one file to the other. Characters in the Base64 alphabet, white space and equals sign are expected to be in urlencoded data. The presence of other characters could be a sign that the data is corrupted.
    
    Parameters:
    
    fIn - File to be decoded (will be overwritten).
    
    throwExceptions - Whether to throw exceptions when unexpected data is encountered.
    
    Throws:
    
    java.io.IOException - if an IO error occurs.
    
    Base64DecodingException - if unexpected data is encountered when throwExceptions is specified.
    
    Since:
    
    ostermillerutils 1.00.00
  - decode
```
public static void decode(java.io.File fIn,
                          java.io.File fOut)
                   throws java.io.IOException
```
    Decode Base64 encoded data from one file to the other. Characters in the Base64 alphabet, white space and equals sign are expected to be in urlencoded data. The presence of other characters could be a sign that the data is corrupted.
    
    Parameters:
    
    fIn - File to be decoded.
    
    fOut - File to which the results should be written (may be the same as fIn).
    
    Throws:
    
    java.io.IOException - if an IO error occurs.
    
    Base64DecodingException - if unexpected data is encountered.
    
    Since:
    
    ostermillerutils 1.00.00
  - decode
```
public static void decode(java.io.File fIn,
                          java.io.File fOut,
                          boolean throwExceptions)
                   throws java.io.IOException
```
    Decode Base64 encoded data from one file to the other. Characters in the Base64 alphabet, white space and equals sign are expected to be in urlencoded data. The presence of other characters could be a sign that the data is corrupted.
    
    Parameters:
    
    fIn - File to be decoded.
    
    fOut - File to which the results should be written (may be the same as fIn).
    
    throwExceptions - Whether to throw exceptions when unexpected data is encountered.
    
    Throws:
    
    java.io.IOException - if an IO error occurs.
    
    Base64DecodingException - if unexpected data is encountered when throwExceptions is specified.
    
    Since:
    
    ostermillerutils 1.00.00
  - decodeToBytes
```
public static byte[] decodeToBytes(java.io.InputStream in)
                            throws java.io.IOException
```
    Decode Base64 encoded data from the InputStream to a byte array. Characters that are not part of the Base64 alphabet are ignored in the input.
    
    Parameters:
    
    in - Stream from which to read data that needs to be decoded.
    
    Returns:
    
    decoded data.
    
    Throws:
    
    java.io.IOException - if an IO error occurs.
    
    Since:
    
    ostermillerutils 1.00.00
  - decodeToString
```
public static java.lang.String decodeToString(java.io.InputStream in)
                                       throws java.io.IOException
```
    Decode Base64 encoded data from the InputStream to a String. Characters that are not part of the Base64 alphabet are ignored in the input. Bytes are converted to characters in the output String according to the platform's default character encoding.
    
    Parameters:
    
    in - Stream from which to read data that needs to be decoded.
    
    Returns:
    
    decoded data.
    
    Throws:
    
    java.io.IOException - if an IO error occurs.
    
    Since:
    
    ostermillerutils 1.02.16
  - decodeToString
```
public static java.lang.String decodeToString(java.io.InputStream in,
                                              java.lang.String enc)
                                       throws java.io.IOException
```
    Decode Base64 encoded data from the InputStream to a String. Characters that are not part of the Base64 alphabet are ignored in the input.
    
    Parameters:
    
    in - Stream from which to read data that needs to be decoded.
    
    enc - Character encoding to use when converting bytes to characters.
    
    Returns:
    
    decoded data.
    
    Throws:
    
    java.io.IOException - if an IO error occurs.Throws:
    
    java.io.UnsupportedEncodingException - if the character encoding specified is not supported.
    
    Since:
    
    ostermillerutils 1.02.16
  - decode
```
public static void decode(java.io.InputStream in,
                          java.io.OutputStream out)
                   throws java.io.IOException
```
    Decode Base64 encoded data from the InputStream to the OutputStream. Characters in the Base64 alphabet, white space and equals sign are expected to be in urlencoded data. The presence of other characters could be a sign that the data is corrupted.
    
    Parameters:
    
    in - Stream from which to read data that needs to be decoded.
    
    out - Stream to which to write decoded data.
    
    Throws:
    
    java.io.IOException - if an IO error occurs.
    
    Base64DecodingException - if unexpected data is encountered.
    
    Since:
    
    ostermillerutils 1.00.00
  - decode
```
public static void decode(java.io.InputStream in,
                          java.io.OutputStream out,
                          boolean throwExceptions)
                   throws java.io.IOException
```
    Decode Base64 encoded data from the InputStream to the OutputStream. Characters in the Base64 alphabet, white space and equals sign are expected to be in urlencoded data. The presence of other characters could be a sign that the data is corrupted.
    
    Parameters:
    
    in - Stream from which to read data that needs to be decoded.
    
    out - Stream to which to write decoded data.
    
    throwExceptions - Whether to throw exceptions when unexpected data is encountered.
    
    Throws:
    
    java.io.IOException - if an IO error occurs.
    
    Base64DecodingException - if unexpected data is encountered when throwExceptions is specified.
    
    Since:
    
    ostermillerutils 1.00.00
  - isBase64
```
public static boolean isBase64(byte[] bytes)
```
    Determines if the byte array is in base64 format.
    Data will be considered to be in base64 format if it contains only base64 characters and whitespace with equals sign padding on the end so that the number of base64 characters is divisible by four.
    It is possible for data to be in base64 format but for it to not meet these stringent requirements. It is also possible for data to meet these requirements even though decoding it would not make any sense. This method should be used as a guide but it is not authoritative because of the possibility of these false positives and false negatives.
    Additionally, extra data such as headers or footers may throw this method off the scent and cause it to return false.
    
    Parameters:
    
    bytes - data that could be in base64 format.
    
    Returns:
    
    true if give byte array is in base64 format, else false.
    
    Since:
    
    ostermillerutils 1.00.00
  - isBase64
```
public static boolean isBase64(java.lang.String string)
```
    Determines if the String is in base64 format. The String is converted to and from bytes according to the platform's default character encoding.
    Data will be considered to be in base64 format if it contains only base64 characters and whitespace with equals sign padding on the end so that the number of base64 characters is divisible by four.
    It is possible for data to be in base64 format but for it to not meet these stringent requirements. It is also possible for data to meet these requirements even though decoding it would not make any sense. This method should be used as a guide but it is not authoritative because of the possibility of these false positives and false negatives.
    Additionally, extra data such as headers or footers may throw this method off the scent and cause it to return false.
    
    Parameters:
    
    string - String that may be in base64 format.
    
    Returns:
    
    Best guess as to whether the data is in base64 format.
    
    Since:
    
    ostermillerutils 1.00.00
  - isBase64
```
public static boolean isBase64(java.lang.String string,
                               java.lang.String enc)
                        throws java.io.UnsupportedEncodingException
```
    Determines if the String is in base64 format.
    Data will be considered to be in base64 format if it contains only base64 characters and whitespace with equals sign padding on the end so that the number of base64 characters is divisible by four.
    It is possible for data to be in base64 format but for it to not meet these stringent requirements. It is also possible for data to meet these requirements even though decoding it would not make any sense. This method should be used as a guide but it is not authoritative because of the possibility of these false positives and false negatives.
    Additionally, extra data such as headers or footers may throw this method off the scent and cause it to return false.
    
    Parameters:
    
    string - String that may be in base64 format.
    
    enc - Character encoding to use when converting to bytes.
    
    Returns:
    
    Best guess as to whether the data is in base64 format.
    
    Throws:
    
    java.io.UnsupportedEncodingException - if the character encoding specified is not supported.
  - isBase64
```
public static boolean isBase64(java.io.File fIn)
                        throws java.io.IOException
```
    Determines if the File is in base64 format.
    Data will be considered to be in base64 format if it contains only base64 characters and whitespace with equals sign padding on the end so that the number of base64 characters is divisible by four.
    It is possible for data to be in base64 format but for it to not meet these stringent requirements. It is also possible for data to meet these requirements even though decoding it would not make any sense. This method should be used as a guide but it is not authoritative because of the possibility of these false positives and false negatives.
    Additionally, extra data such as headers or footers may throw this method off the scent and cause it to return false.
    
    Parameters:
    
    fIn - File that may be in base64 format.
    
    Returns:
    
    Best guess as to whether the data is in base64 format.
    
    Throws:
    
    java.io.IOException - if an IO error occurs.
    
    Since:
    
    ostermillerutils 1.00.00
  - isBase64
```
public static boolean isBase64(java.io.InputStream in)
                        throws java.io.IOException
```
    Reads data from the stream and determines if it is in base64 format.
    Data will be considered to be in base64 format if it contains only base64 characters and whitespace with equals sign padding on the end so that the number of base64 characters is divisible by four.
    It is possible for data to be in base64 format but for it to not meet these stringent requirements. It is also possible for data to meet these requirements even though decoding it would not make any sense. This method should be used as a guide but it is not authoritative because of the possibility of these false positives and false negatives.
    Additionally, extra data such as headers or footers may throw this method off the scent and cause it to return false.
    
    Parameters:
    
    in - Stream from which to read data to be tested.
    
    Returns:
    
    Best guess as to whether the data is in base64 format.
    
    Throws:
    
    java.io.IOException - if an IO error occurs.
    
    Since:
    
    ostermillerutils 1.00.00

Class Base64

Field Summary

Method Summary

Methods inherited from class java.lang.Object

Field Detail

base64Chars

reverseBase64Chars

version

Method Detail

encode

encode

encodeToString

encodeToString

encodeToString

encode

encode

encode

encode

encode

encode

encode

encode

encode

decode

decode

decode

decodeToString

decodeToString

decodeToString

decodeToStream

decodeToStream

decodeToBytes

decodeToBytes

decodeToString

decodeToString

decodeToBytes

decode

decode

decodeToStream

decode

decode

decode

decode

decodeToBytes

decodeToString

decodeToString

decode

decode

isBase64

isBase64

isBase64

isBase64

isBase64