org.jlab.coda.emu

Class Emu

java.lang.Object

org.jlab.coda.emu.Emu

All Implemented Interfaces:

CODAComponent, StatedObject, CommandAcceptor

public class Emu
extends java.lang.Object
implements CODAComponent

This is the main class of the EMU (Event Management Unit) program. It implements the CODAComponent interface which allows communication with Run Control and implements a state machine.

Author:

heyes, timmer

Nested Class Summary

Nested Classes

Modifier and Type	Class and Description
(package private) class	Emu.StatusReportingThread Class defining thread which reports the EMU status to Run Control.

Field Summary

Fields

Modifier and Type	Field and Description
protected java.util.concurrent.atomic.AtomicReference<java.lang.String>	errorMsg Error message.

Constructor Summary

Constructors

Constructor and Description
Emu(java.lang.String name, java.lang.String type, boolean debugUI, boolean debug) Constructor.

Method Summary

Modifier and Type	Method and Description
int	addOutputDestination(java.lang.String outputDestination) Add a single output destination name, like a file or et system name, or a string like "cMsg", to the array of destinations names.
void	clearOutputDestinations() Clear output destination names.
org.w3c.dom.Document	configuration() Get the configuration of this CODA component in the form of a parsed XML document object that is loaded from a file when the configure command is executed.
void	execute(Command cmd) This method takes a Command object and attempts to execute it.
int	getBufferLevel() Get the smallest number of evio-events/et-buffer that connected DC/PEB found.
CMSGPortal	getCmsgPortal() Get the cmsgPortal object of this emu.
java.lang.String	getCmsgUDL() Get the UDL used to connect to the cMsg server by this CODA component.
CODAClass	getCodaClass() Get the class of this CODA component (e.g.
CODAClass	getCodaClassObject() Get the CODAClass of this emu.
int	getCodaid() Get the id of this CODA component.
(package private) EmuDataPath	getDataPath() Get the data path object that directs how the run control commands are distributed among the EMU parts.
int	getDataStreamCount() Get the total number of data streams in the configuration which contains this emu.
int	getDataStreamId() Get the id number of the data stream this emu is a part of.
long	getEndingTimeLimit() This method gets the amount of milliseconds to wait for an END command to succeed before going to an ERROR state.
java.lang.String	getError() Get any available error information.
java.lang.String	getExpid() Get the experiment id (expid) of this CODA component.
int	getFileOutputCount() Get the number of file output channels in this emu.
DebugFrame	getFramework() Get the debug GUI object.
java.lang.String	getHostName() Get the name of the host this CODA component is running on.
java.util.List<DataChannel>	getInChannels() Get list of input channels.
int	getInputChannelCount() Get out the number of input channels to the first module.
Logger	getLogger() Get the Logger this emu uses.
java.util.List<DataChannel>	getOutChannels() Get list of output channels.
java.lang.String[]	getPlatformIpAddresses() Get the rc platform's IP addresses as dot-decimal strings.
int	getPlatformTcpPort() Get the platform's cMsg domain server's TCP port.
int	getRunNumber() Get the run number of this CODA component.
java.lang.String	getRunType() Get the runType of this CODA component.
int	getRunTypeId() Get the numeric code representing the run type of this CODA component.
java.lang.String	getSession() Get the session of this CODA component.
CODAState	getState() This method gets the state of this Emu.
(package private) EmuModule	getStatisticsModule() Get the module from which we gather statistics.
java.lang.ThreadGroup	getThreadGroup() Get the ThreadGroup this emu's threads are part of.
long	getTime() Get the time from System.currentTimeMillis(), but it's updated only every second or thereabouts.
boolean	isFileWritingOn() Set the flag to tell file output channel to actually write the file or not.
java.lang.String	name() Get the name of this CODA component.
org.w3c.dom.Document	parameters() Get the configuration of this CODA component in the form of a parsed XML document object that is loaded when the configure command is executed.
void	postCommand(Command cmd) This method puts a command object into a mailbox of a CODA component that is periodically checked by that component.
CODAStateIF	previousState() This method returns the previous state of the modules in this Emu.
(package private) void	quit() Exit this Emu (there still may be other threads running in the JVM).
void	reset() This method executes a RESET command.
void	sendRcErrorMessage(java.lang.String error) Send run control an error message which gets displayed in its GUI.
void	sendRcInfoMessage(java.lang.String msg) Send run control a informational message which gets displayed in its GUI.
void	sendRcSevereMessage(java.lang.String error) Send run control a severe error message which gets displayed in its GUI.
void	sendRcWarningMessage(java.lang.String msg) Send run control a warning message which gets displayed in its GUI.
void	sendStatusMessage() Allow the "out-of-band" sending of a status message to run control.
void	setBufferLevel(int bufferLevel) Set the smallest number of evio-events/et-buffer that connected DC/PEB found.
void	setCodaClass(CODAClass codaClass) Method to set the CODAClass member.
void	setCodaid(int codaid) Set the id of this CODA component.
(package private) void	setDataPath(EmuDataPath dataPath) Set the data path object that directs how the run control commands are distributed among the EMU parts.
void	setErrorState(java.lang.String errorCause) This method sets the state of this Emu to ERROR, but not if the emu is currently resetting in which case it immediately returns.
void	setOutputDestination(int index, java.lang.String outputDestination) Change an existing single output destination name in the array of names.
void	setRunNumber(int runNumber) Set the run number of this CODA component.
void	setRunType(java.lang.String runType) Set the runType of this CODA component.
void	setRunTypeId(int runTypeId) Set the numeric code representing the run type of this CODA component.
void	setState(CODAStateIF state) This method sets the state of this Emu, but not if emu is currently resetting in which case it immediately returns.
CODAStateIF	state() Get the state of this object.
boolean	theEndIsNigh() Get whether END button has been pushed.

Methods inherited from class java.lang.Object

clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Field Detail

errorMsg

protected java.util.concurrent.atomic.AtomicReference<java.lang.String> errorMsg

Error message. reset() sets it back to null. Making this an atomically settable String ensures that only 1 thread at a time can change its value. That way it's only set once per error.

Constructor Detail

Emu

public Emu(java.lang.String name,
           java.lang.String type,
           boolean debugUI,
           boolean debug)
    throws EmuException

Constructor.

This class is not executable. To create and run an Emu, use the EmuFactory class.

A thread is started to monitor the state. The emu loads local.xml which contains a specification of status parameters. The emu starts up a connection to the cMsg server. By the end of the constructor several threads have been started.

Parameters:

name - name of Emu

type - CODA component type of Emu

debugUI - start a debug GUI

debug - turn on debug printout

Throws:

EmuException - if name is null, or cannot connect to rc server

Method Detail

name

public java.lang.String name()

Get the name of this CODA component.

Specified by:

name in interface CODAComponent

Returns:

the name of this CODA component

getCodaid

public int getCodaid()

Get the id of this CODA component.

Specified by:

getCodaid in interface CODAComponent

Returns:

the id of this CODA component.

setCodaid

public void setCodaid(int codaid)

Set the id of this CODA component.

Specified by:

setCodaid in interface CODAComponent

Parameters:

codaid - the coda id of this CODA component

See Also:

CODAComponent.setCodaid(int)

getSession

public java.lang.String getSession()

Get the session of this CODA component.

Specified by:

getSession in interface CODAComponent

Returns:

the session of this CODA component

getExpid

public java.lang.String getExpid()

Get the experiment id (expid) of this CODA component.

Specified by:

getExpid in interface CODAComponent

Returns:

the experiment id (expid) of this CODA component

getHostName

public java.lang.String getHostName()

Get the name of the host this CODA component is running on.

Specified by:

getHostName in interface CODAComponent

Returns:

the hostName of this CODAComponent object.

getCodaClass

public CODAClass getCodaClass()

Get the class of this CODA component (e.g. "EMU", "ROC", "ER").

Specified by:

getCodaClass in interface CODAComponent

Returns:

the class of this CODA component (e.g. "EMU", "ROC", "ER")

getRunNumber

public int getRunNumber()

Get the run number of this CODA component.

Specified by:

getRunNumber in interface CODAComponent

Returns:

the run number of this CODA component

getRunTypeId

public int getRunTypeId()

Get the numeric code representing the run type of this CODA component.

Specified by:

getRunTypeId in interface CODAComponent

Returns:

the numeric code representing the run type of this CODA component.

getRunType

public java.lang.String getRunType()

Get the runType of this CODA component.

Specified by:

getRunType in interface CODAComponent

Returns:

the runType of this CODA component

getCmsgUDL

public java.lang.String getCmsgUDL()

Get the UDL used to connect to the cMsg server by this CODA component.

Specified by:

getCmsgUDL in interface CODAComponent

Returns:

the UDL used to connect to the cMsg server by this CODA component

getPlatformIpAddresses

public java.lang.String[] getPlatformIpAddresses()

Get the rc platform's IP addresses as dot-decimal strings.

Returns:

rc platform's IP addresses as dot-decimal strings, null if none.

getPlatformTcpPort

public int getPlatformTcpPort()

Get the platform's cMsg domain server's TCP port.

Returns:

platform's cMsg domain server's TCP port, 0 if none.

getBufferLevel

public int getBufferLevel()

Get the smallest number of evio-events/et-buffer that connected DC/PEB found. Meaningful only for a ROC.

Returns:

smallest number of evio-events/et-buffer that connected DC/PEB found.

setBufferLevel

public void setBufferLevel(int bufferLevel)

Set the smallest number of evio-events/et-buffer that connected DC/PEB found. Meaningful only for a ROC.

Parameters:

bufferLevel - smallest number of evio-events/et-buffer that connected DC/PEB found.

configuration

public org.w3c.dom.Document configuration()

Get the configuration of this CODA component in the form of a parsed XML document object that is loaded from a file when the configure command is executed. It may change from run to run and tells the Emu which modules to load, which data transports to start and what data channels to open.

Specified by:

configuration in interface CODAComponent

Returns:

the CODA component configuration object as a parsed XML document

parameters

public org.w3c.dom.Document parameters()

Get the configuration of this CODA component in the form of a parsed XML document object that is loaded when the configure command is executed. It contains all of the status variables that change from run to run.

Specified by:

parameters in interface CODAComponent

Returns:

the CODA component configuration object as a parsed XML document that contains all of the status variables that change from run to run

setRunNumber

public void setRunNumber(int runNumber)

Set the run number of this CODA component.

Specified by:

setRunNumber in interface CODAComponent

Parameters:

runNumber - the run number of this CODA component

See Also:

CODAComponent.setRunNumber(int)

setRunTypeId

public void setRunTypeId(int runTypeId)

Set the numeric code representing the run type of this CODA component.

Specified by:

setRunTypeId in interface CODAComponent

Parameters:

runTypeId - the numeric code representing the runType of this CODA component

See Also:

CODAComponent.setRunTypeId(int)

setRunType

public void setRunType(java.lang.String runType)

Set the runType of this CODA component.

Specified by:

setRunType in interface CODAComponent

Parameters:

runType - the runType of this CODA component

See Also:

CODAComponent.setRunType(String)

getCodaClassObject

public CODAClass getCodaClassObject()

Get the CODAClass of this emu.

Returns:

CODAClass of this emu.

setCodaClass

public void setCodaClass(CODAClass codaClass)

Method to set the CODAClass member.

Parameters:

codaClass - type of CODA component such as ROC, EMU, or ER.

isFileWritingOn

public boolean isFileWritingOn()

Set the flag to tell file output channel to actually write the file or not.

Returns:

true if file output channel will actually write the file, else false.

getFramework

public DebugFrame getFramework()

Get the debug GUI object.

Returns:

debug gui.

getThreadGroup

public java.lang.ThreadGroup getThreadGroup()

Get the ThreadGroup this emu's threads are part of.

Returns:

ThreadGroup this emu's threads are part of.

getLogger

public Logger getLogger()

Get the Logger this emu uses.

Returns:

Logger this emu uses.

getCmsgPortal

public CMSGPortal getCmsgPortal()

Get the cmsgPortal object of this emu.

Returns:

cmsgPortal object of this emu.

getEndingTimeLimit

public long getEndingTimeLimit()

This method gets the amount of milliseconds to wait for an END command to succeed before going to an ERROR state.

Returns:

amount of milliseconds to wait for an END command to succeed before going to an ERROR state.

getDataPath

EmuDataPath getDataPath()

Get the data path object that directs how the run control commands are distributed among the EMU parts.

Returns:

the data path object

setDataPath

void setDataPath(EmuDataPath dataPath)

Set the data path object that directs how the run control commands are distributed among the EMU parts.

Parameters:

dataPath - the data path object

getStatisticsModule

EmuModule getStatisticsModule()

Get the module from which we gather statistics. Used to report statistics to Run Control.

Returns:

the module from which statistics are gathered.

getInputChannelCount

public int getInputChannelCount()

Get out the number of input channels to the first module. This is determined when initially receiving the configure command.

Returns:

number of input channels to the first module.

getInChannels

public java.util.List<DataChannel> getInChannels()

Get list of input channels.

Returns:

list of input channels

getOutChannels

public java.util.List<DataChannel> getOutChannels()

Get list of output channels.

Returns:

list of output channels

getDataStreamId

public int getDataStreamId()

Get the id number of the data stream this emu is a part of. Only relevant if this emu is an EB which outputs to a single ER, or has an output file channel.

Returns:

data stream id.

getDataStreamCount

public int getDataStreamCount()

Get the total number of data streams in the configuration which contains this emu.

Returns:

total number of data streams in this configuration.

getFileOutputCount

public int getFileOutputCount()

Get the number of file output channels in this emu.

Returns:

number of file output channels in this emu.

theEndIsNigh

public boolean theEndIsNigh()

Get whether END button has been pushed. If true, someone hit the END button, but the END event has not necessarily come through yet and the END command may not have been received yet. This allows the file channel (in ER) to cleanup if disk is full and END button was pushed.

Only to be used internally to the emu.

Returns:

true if someone hit the END button (until END transition finished).

previousState

public CODAStateIF previousState()

This method returns the previous state of the modules in this Emu. If the Emu has not undergone any transitions yet, it returns null.

Returns:

state before last transition

getError

public java.lang.String getError()

Get any available error information.

Specified by:

getError in interface StatedObject

Returns:

any available error information; null if none

setState

public void setState(CODAStateIF state)

This method sets the state of this Emu, but not if emu is currently resetting in which case it immediately returns. Setting the state is synchronized on the emu object to ensure that the state does not change while it's being read.

Parameters:

state - desired state of this Emu.

getState

public CODAState getState()

This method gets the state of this Emu.

Returns:

state of this Emu.

setErrorState

public void setErrorState(java.lang.String errorCause)

This method sets the state of this Emu to ERROR, but not if the emu is currently resetting in which case it immediately returns. It sends an error message to run control if not already done. Setting the state is synchronized on the emu object to ensure that the state does not change while it's being read.

Parameters:

errorCause - description of error's cause.

state

public CODAStateIF state()

Get the state of this object.

Specified by:

state in interface StatedObject

Returns:

the state of this object

sendRcInfoMessage

public void sendRcInfoMessage(java.lang.String msg)

Send run control a informational message which gets displayed in its GUI.

Parameters:

msg - info message

sendRcWarningMessage

public void sendRcWarningMessage(java.lang.String msg)

Send run control a warning message which gets displayed in its GUI.

Parameters:

msg - warning message

sendRcErrorMessage

public void sendRcErrorMessage(java.lang.String error)

Send run control an error message which gets displayed in its GUI.

Parameters:

error - error message

sendRcSevereMessage

public void sendRcSevereMessage(java.lang.String error)

Send run control a severe error message which gets displayed in its GUI.

Parameters:

error - severe message

addOutputDestination

public int addOutputDestination(java.lang.String outputDestination)

Add a single output destination name, like a file or et system name, or a string like "cMsg", to the array of destinations names. Call this when setting a destination for the first time. Do NOT call this if resetting an existing output destination file name to the next split file name.

Parameters:

outputDestination - name of an output data destination of this emu

Returns:

number of already existing output destinations.

setOutputDestination

public void setOutputDestination(int index,
                                 java.lang.String outputDestination)

Change an existing single output destination name in the array of names. Call this if resetting an existing output destination file name to the next split file name.

Parameters:

index - index in array of name to be changed.

outputDestination - name of an output destination.

clearOutputDestinations

public void clearOutputDestinations()

Clear output destination names.

sendStatusMessage

public void sendStatusMessage()

Allow the "out-of-band" sending of a status message to run control.

getTime

public long getTime()

Get the time from System.currentTimeMillis(), but it's updated only every second or thereabouts.

Returns:

time from System.currentTimeMillis()

postCommand

public void postCommand(Command cmd)
                 throws java.lang.InterruptedException

This method puts a command object into a mailbox of a CODA component that is periodically checked by that component.

Specified by:

postCommand in interface CommandAcceptor

Parameters:

cmd - of type Command (eg. start transition, control run variables, control session)

Throws:

java.lang.InterruptedException - if thread interrupted while in method.

quit

void quit()

Exit this Emu (there still may be other threads running in the JVM).

reset

public void reset()

This method executes a RESET command. We don't queued it up and possibly have it wait like a transition command. RESET must always have top priority and is executed in the cMsg callback. Synchronized on emu.

Specified by:

reset in interface CODAComponent

execute

public void execute(Command cmd)

This method takes a Command object and attempts to execute it.

Parameters:

cmd - of type Command