Index

A B C D E F G H I K L M N O P Q R S T U V W

A

AboutBox - Class in org.jlab.coda.emu.support.ui
AboutBox() - Constructor for class org.jlab.coda.emu.support.ui.AboutBox
acceptingClients - Variable in class org.jlab.coda.emu.test.LocalEmuDomainServer: Only allow response to clients if server is properly started.
acceptNode(Node) - Method in class org.jlab.coda.emu.support.configurer.Configurer
add(JInternalFrame) - Method in class org.jlab.coda.emu.support.ui.MDIDesktopPane
addAppender(LoggerAppender) - Method in class org.jlab.coda.emu.support.logger.Logger: Method addAppender ...
addButtonListener(CommandAcceptor, JButton, JTextField) - Method in class org.jlab.coda.emu.support.ui.SmartToolbar: Each time the given button is pressed, the target object posts or executes the command associated with the button.
addDocument(Document) - Method in class org.jlab.coda.emu.support.ui.DebugFrame: Method addDocument ...
addInputChannels(ArrayList<DataChannel>) - Method in interface org.jlab.coda.emu.EmuModule: Add the given input channels to this EmuModule object.
addInputChannels(ArrayList<DataChannel>) - Method in class org.jlab.coda.emu.modules.ModuleAdapter: Add the given input channels to this EmuModule object.
addInputChannels(ArrayList<DataChannel>) - Method in class org.jlab.coda.emu.modules.RocFixedRateSimulation: Add the given input channels to this EmuModule object.
addInputChannels(ArrayList<DataChannel>) - Method in class org.jlab.coda.emu.modules.RocSimulation: Add the given input channels to this EmuModule object.
addInputChannels(ArrayList<DataChannel>) - Method in class org.jlab.coda.emu.modules.ToFile: Add the given input channels to this EmuModule object.
addLogOrigin(Class) - Method in class org.jlab.coda.emu.support.logger.Logger: Add the Class which serves as entry point for log message location.
addModuleName(String, String, String) - Method in class org.jlab.coda.emu.EmuDataPath: Add a module to the data path.
addOutputChannels(ArrayList<DataChannel>) - Method in interface org.jlab.coda.emu.EmuModule: Add the given output channels to this EmuModule object.
addOutputChannels(ArrayList<DataChannel>) - Method in class org.jlab.coda.emu.modules.ModuleAdapter: Add the given output channels to this EmuModule object.
addOutputDestination(String) - Method in class org.jlab.coda.emu.Emu: Add a single output destination name, like a file or et system name, or a string like "cMsg", to the array of destinations names.
addPanel(JPanel, String) - Method in class org.jlab.coda.emu.support.ui.DebugFrame: Method to add Panel to gui.
addToPanel(DataNode) - Method in class org.jlab.coda.emu.support.configurer.DataNode: Add a DataNode object to this DataNode object as part of the JPanel.
addUsers(int) - Method in class org.jlab.coda.emu.support.data.ByteBufferItem: If a reference to this ByteBufferItem is copied, then it is necessary to increase the number of users.
addValue(int) - Method in class org.jlab.coda.emu.support.data.Statistics: Method to add data point.
adjustStatistics(long, long) - Method in interface org.jlab.coda.emu.EmuModule: Adjust the event count and word count reported by this module to run control by added the given numbers.
adjustStatistics(long, long) - Method in class org.jlab.coda.emu.modules.ModuleAdapter: Adjust the event count and word count reported by this module to run control by added the given numbers.
adjustVisibility(Rectangle) - Method in class org.jlab.coda.emu.support.ui.log.LogTextCaret: Method adjustVisibility ...
allowed() - Method in enum org.jlab.coda.emu.support.codaComponent.CODAState: Get the set of allowed transitions from this state.
allowed() - Method in interface org.jlab.coda.emu.support.codaComponent.CODAStateIF: Get the set of allowed transitions from this state.
append(LoggingEvent) - Method in interface org.jlab.coda.emu.support.logger.LoggerAppender: Method append ...
append(LoggingEvent) - Method in class org.jlab.coda.emu.support.logger.PrintAppender: Method append ...
append(LoggingEvent) - Method in class org.jlab.coda.emu.support.logger.QueueAppender: Method append ...
append(LoggingEvent) - Method in class org.jlab.coda.emu.support.logger.StdOutAppender: Method append ...
append(LoggingEvent) - Method in class org.jlab.coda.emu.support.messaging.CMSGPortal: Send a dalogmsg message using the cMsg system.
append(LoggingEvent) - Method in class org.jlab.coda.emu.support.ui.log.SwingLogConsoleDialog: Method append ...
append(String) - Method in class org.jlab.coda.emu.support.ui.log.SwingLogConsoleDialog: Method append ...
append(String, String) - Method in class org.jlab.coda.emu.support.ui.log.SwingLogConsoleDialog: Method append ...
associateModule(EmuModule) - Method in class org.jlab.coda.emu.EmuDataPath: Associate an EmuModule object with a module of the same name in the path.
Attached - Interface in org.jlab.coda.emu.support.data: Interface used to designate the presence of an attached object.
attachment - Variable in class org.jlab.coda.emu.support.data.RingItemAdapter: Associated object used to store things.
attachToInput(SocketChannel, int, int, int, int) - Method in class org.jlab.coda.emu.support.transport.DataChannelImplEmu: Once a client connects to the Emu domain server in the Emu transport object, that socket is passed to this method and a thread is spawned to handle all communications over it.
attachToInput(SocketChannel, int, int, int, int) - Method in class org.jlab.coda.emu.test.InputDataChannelImplEmu: Once a client connects to the Emu domain server in the Emu transport object, that socket is passed to this method and a thread is spawned to handle all communications over it.
attr - Variable in class org.jlab.coda.emu.support.transport.DataTransportAdapter: Map of attributes.
attributeMap - Variable in class org.jlab.coda.emu.modules.ModuleAdapter: Map containing attributes of this module given in config file.
auxObject - Variable in class org.jlab.coda.emu.support.data.ByteBufferSupply: Object to be associated with each ByteBufferItem.
availableSequences - Variable in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Maximum index of available ring items.
avgEventSize - Variable in class org.jlab.coda.emu.modules.ModuleAdapter: Average-sized built event in bytes.
avgEventSize - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants

B

bAddrList - Variable in class org.jlab.coda.emu.support.transport.DataChannelAdapter: List of broadcast addresses corresponding to ipAddrList.
barrierIn - Variable in class org.jlab.coda.emu.modules.ToFile: All recording threads share one barrier.
barriersIn - Variable in class org.jlab.coda.emu.modules.EventRecording: All recording threads share one barrier.
bbInSupply - Variable in class org.jlab.coda.emu.support.transport.DataChannelImplEmu: Ring buffer holding ByteBuffers when using EvioCompactEvent reader for incoming events.
bbSupply - Variable in class org.jlab.coda.emu.support.transport.DataChannelImplEt: Ring buffer holding ByteBuffers when using EvioCompactEvent reader for incoming events.
bbSupply - Variable in class org.jlab.coda.emu.test.ByteBufferSupplyTest
bbSupply - Variable in class org.jlab.coda.emu.test.InputDataChannelImplEmu: Ring buffers holding ByteBuffers when using EvioCompactEvent reader for incoming events.
btIndex - Variable in class org.jlab.coda.emu.test.BuildThreadTest.BuildThread
btIndex - Variable in class org.jlab.coda.emu.test.BuildThreadTest.BuildThreadVol
buffer - Variable in class org.jlab.coda.emu.support.data.RingItemAdapter: ByteBuffer to wrap.
buffersPerSec - Variable in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Number of buffers per second of data to write over the output channel.
buildBarrierIn - Variable in class org.jlab.coda.emu.modules.Dummy: For each input channel, all event-moving threads share one barrier.
BuildingThread(int, ThreadGroup, String) - Constructor for class org.jlab.coda.emu.modules.FastEventBuilder.BuildingThread: Constructor.
buildPhysicsEventWithPhysics(EvioNode[], ByteBuffer, int, int, boolean, int[], ByteBuffer[]) - Static method in class org.jlab.coda.emu.support.data.Evio: Build a single physics event with the given array of Physics events.
buildPhysicsEventWithPhysics(PayloadBuffer[], CompactEventBuilder) - Static method in class org.jlab.coda.emu.support.data.Evio: Build a single physics event with the given trigger bank and the given array of Physics events.
buildPhysicsEventWithRocRaw(EvioNode[], boolean, int, int, ByteBuffer, int[], ByteBuffer[]) - Static method in class org.jlab.coda.emu.support.data.Evio: Build a single physics event with the given array of ROC raw records.
buildPhysicsEventWithRocRaw(PayloadBuffer[], CompactEventBuilder) - Static method in class org.jlab.coda.emu.support.data.Evio: Build a single physics event with the given trigger bank and the given array of ROC raw records.
buildSequenceIn - Variable in class org.jlab.coda.emu.modules.Dummy: For each input channel, 1 sequence per event-moving thread.
BuildThread(int) - Constructor for class org.jlab.coda.emu.test.BuildThreadTest.BuildThread
BuildThreadTest - Class in org.jlab.coda.emu.test: This class is designed to test the proper way to release input channel ring items in the Event Builder's build threads.
BuildThreadTest(String[]) - Constructor for class org.jlab.coda.emu.test.BuildThreadTest: Constructor.
BuildThreadTest.BuildThread - Class in org.jlab.coda.emu.test
BuildThreadTest.BuildThreadVol - Class in org.jlab.coda.emu.test
BuildThreadVol(int) - Constructor for class org.jlab.coda.emu.test.BuildThreadTest.BuildThreadVol
ByteBufferFactory() - Constructor for class org.jlab.coda.emu.test.VardanERSAP.ByteBufferFactory
ByteBufferItem - Class in org.jlab.coda.emu.support.data: This class is used in conjunction with the ByteBufferSupply class to provide a very fast supply of ByteBuffer objects for reuse.
ByteBufferItem(int, ByteOrder, boolean, boolean, int) - Constructor for class org.jlab.coda.emu.support.data.ByteBufferItem: Constructor.
ByteBufferItem(int, ByteOrder, boolean, boolean, int, Object, int) - Constructor for class org.jlab.coda.emu.support.data.ByteBufferItem: Constructor.
ByteBufferItem(ByteBuffer, boolean, int) - Constructor for class org.jlab.coda.emu.support.data.ByteBufferItem: Constructor used to initially fill each ByteBufferItem of a ByteBufferSupply with a copy of a template buffer.
byteBufferItem - Variable in class org.jlab.coda.emu.support.data.RingItemAdapter: This refers to the wrapper object of buffer in reusable ByteBufferSupply (if any).
byteBufferSize - Variable in class org.jlab.coda.emu.test.VardanERSAP: Size of ByteBuffers in ring.
ByteBufferSupply - Class in org.jlab.coda.emu.support.data: This class is used to provide a very fast supply of ByteBuffer objects (actually ByteBufferItem objects each of which wraps a ByteBuffer) for reuse in 3 different modes (uses Disruptor software package).
ByteBufferSupply(int, int) - Constructor for class org.jlab.coda.emu.support.data.ByteBufferSupply: Constructor.
ByteBufferSupply(int, int, ByteOrder, boolean) - Constructor for class org.jlab.coda.emu.support.data.ByteBufferSupply: Constructor.
ByteBufferSupply(int, int, ByteOrder, boolean, boolean) - Constructor for class org.jlab.coda.emu.support.data.ByteBufferSupply: Constructor.
ByteBufferSupply(int, int, ByteOrder, boolean, boolean, EvioNodePool[]) - Constructor for class org.jlab.coda.emu.support.data.ByteBufferSupply: Constructor.
ByteBufferSupply(int, List<ByteBuffer>, boolean) - Constructor for class org.jlab.coda.emu.support.data.ByteBufferSupply: Constructor.
byteBufferSupply - Variable in class org.jlab.coda.emu.support.data.RingItemAdapter: This refers to a supply of reusable ByteBuffers from which buffer came (if any).
ByteBufferSupplyTest - Class in org.jlab.coda.emu.test: This class is designed to receive output from an EMU.
ByteBufferSupplyTest(String[]) - Constructor for class org.jlab.coda.emu.test.ByteBufferSupplyTest: Constructor.
ByteBufferSupplyTest.RingConsumerThread - Class in org.jlab.coda.emu.test: Thread to do consumer get and release on ring buffer items.
byteOrder - Variable in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Byte order of output data.

C

callback(cMsgMessage, Object) - Method in class org.jlab.coda.emu.support.messaging.MvalReportingHandler: This method is a callback for subscriptions of subject = this emu's name.
callback(cMsgMessage, Object) - Method in class org.jlab.coda.emu.support.messaging.RcCommandHandler: This method is a callback for subscriptions of subject = * and various types like run/transition/* ., run/control/*, session/setOption/*, session/control/*, and coda/info/* .
callback(cMsgMessage, Object) - Method in class org.jlab.coda.emu.support.transport.DataChannelImplCmsg.ReceiveMsgCallback: Callback method definition.
callback(cMsgMessage, Object) - Method in class org.jlab.coda.emu.support.ui.EMUCommander.CallbackAdapter
callback(cMsgMessage, Object) - Method in class org.jlab.coda.emu.test.ReceiverCmsg.myCallback
callback(cMsgMessage, Object) - Method in class org.jlab.coda.emu.test.RocSynchronizer.myCallback
CallbackAdapter() - Constructor for class org.jlab.coda.emu.support.ui.EMUCommander.CallbackAdapter
cascadeFrames() - Method in class org.jlab.coda.emu.support.ui.MDIDesktopPane: Cascade all internal frames
channelState - Variable in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Channel state.
checkConsistency(PayloadBuffer[], long) - Static method in class org.jlab.coda.emu.support.data.Evio: Check each payload bank - one from each input channel - for a number of issues:
checkInput(PayloadBuffer, DataChannel, EventType, EvioNode, boolean) - Static method in class org.jlab.coda.emu.support.data.Evio: Check the given payload buffer for correct record id, source id.
checkInputType(int, DataChannel, EventType, EvioNode) - Static method in class org.jlab.coda.emu.support.data.Evio: Check the given payload buffer for event type (physics, ROC raw, control, or user) as well as evio structure type.
checkPayload(PayloadBuffer, DataChannel) - Static method in class org.jlab.coda.emu.support.data.Evio: Check the given payload buffer for correct format (physics, ROC raw, control, or user).
checkRecordIdSequence(int, int, boolean, EventType, DataChannel) - Static method in class org.jlab.coda.emu.support.data.Evio: Check the data coming over a channel for sequential record ids.
chunk_X_EtBuf - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants
clear() - Method in class org.jlab.coda.emu.EmuDataPath: Clear all existing modules from data path.
clear() - Method in class org.jlab.coda.emu.support.ui.log.SwingLogConsoleDialog
clearChannels() - Method in interface org.jlab.coda.emu.EmuModule: Remove all channels from this EmuModule object.
clearChannels() - Method in class org.jlab.coda.emu.modules.EventRecording: Remove all channels from this EmuModule object.
clearChannels() - Method in class org.jlab.coda.emu.modules.ModuleAdapter: Remove all channels from this EmuModule object.
clearChannels() - Method in class org.jlab.coda.emu.modules.RocFixedRateSimulation: Remove all channels from this EmuModule object.
clearChannels() - Method in class org.jlab.coda.emu.modules.RocSimulation: Remove all channels from this EmuModule object.
clearChannels() - Method in class org.jlab.coda.emu.modules.ToFile: Remove all channels from this EmuModule object.
clearOutputDestinations() - Method in class org.jlab.coda.emu.Emu: Clear output destination names.
clone() - Method in class org.jlab.coda.emu.support.data.PayloadBuffer: Clones this object setting the attachment to null.
clone() - Method in class org.jlab.coda.emu.support.data.RingItemAdapter
close() - Method in class org.jlab.coda.emu.support.ui.log.SwingLogConsoleDialog
CmdExecException - Exception in org.jlab.coda.emu.support.control: Created by IntelliJ IDEA.
CmdExecException() - Constructor for exception org.jlab.coda.emu.support.control.CmdExecException: Constructs a new exception with null as its detail message.
CmdExecException(String) - Constructor for exception org.jlab.coda.emu.support.control.CmdExecException: Constructs a new exception with the specified detail message.
CmdExecException(String, Throwable) - Constructor for exception org.jlab.coda.emu.support.control.CmdExecException: Constructs a new exception with the specified detail message and cause.
CmdExecException(Throwable) - Constructor for exception org.jlab.coda.emu.support.control.CmdExecException: Constructs a new exception with the specified cause and a detail message of (cause==null ? null : cause.toString()) (which typically contains the class and detail message of cause).
CMSGPortal - Class in org.jlab.coda.emu.support.messaging: This class creates a connection to a cMsg server for the purposes of receiving run control commands and logging dalog messages.
CMSGPortal(Emu) - Constructor for class org.jlab.coda.emu.support.messaging.CMSGPortal: Constructor.
cMsgServerConnect() - Method in class org.jlab.coda.emu.support.messaging.CMSGPortal: Create 2 connections to the run control platform's cMsg domain server.
CODA_WARN - Static variable in class org.jlab.coda.emu.support.logger.LoggingEvent: CODA_WARNING msg, 9.
CODAClass - Enum in org.jlab.coda.emu.support.codaComponent: This class is an enum which lists all the possible CODA class values, which are the types of CODA components such as ROC, EMU, or ER.
codaClass - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants
CODACommand - Enum in org.jlab.coda.emu.support.codaComponent: This class enumerates all the commands that Run Control can send to this Emu.
CODACommand.InputType - Enum in org.jlab.coda.emu.support.codaComponent: Ways in which a command's input obtained from a cMsg message.
CODAComponent - Interface in org.jlab.coda.emu.support.codaComponent: This interface describes a component in the CODA run control system.
codaInfoCommandType - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as type in subscription that receives coda info commands.
CODAState - Enum in org.jlab.coda.emu.support.codaComponent: This class is an enum which lists all the possible CODA Emu state-machine states.
CODAStateIF - Interface in org.jlab.coda.emu.support.codaComponent: This interface defines a state of an object.
CODAStateMachine - Interface in org.jlab.coda.emu.support.codaComponent: This interface is used when defining data transports, data channels, and modules.
CODAStateMachineAdapter - Class in org.jlab.coda.emu.support.codaComponent: This class provides empty implementations of the CODAStateMachine interface.
CODAStateMachineAdapter() - Constructor for class org.jlab.coda.emu.support.codaComponent.CODAStateMachineAdapter
CODATag - Enum in org.jlab.coda.emu.support.data: This enum specifies values associated with tags used in CODA online components.
CODATransition - Enum in org.jlab.coda.emu.support.codaComponent: An enum which contains a list of possible transitions in CODA Emu state machine.
Command - Class in org.jlab.coda.emu.support.control: This class represents a command given to an emu by CODA's Run Control.
Command(CODACommand) - Constructor for class org.jlab.coda.emu.support.control.Command: Constructor.
CommandAcceptor - Interface in org.jlab.coda.emu.support.control
CommandHandler(String) - Constructor for class org.jlab.coda.emu.support.ui.EMUCommander.CommandHandler
configPayloadFileChanged - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as payload name for item holding int (1 if file content changed, else 0).
configPayloadFileContent - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as payload name for item holding config file content.
configPayloadFileContentRoc - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as payload name for item holding config file content for simulated ROC.
configPayloadFileName - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as payload name for item holding config file name.
configPayloadPlatformHosts - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as payload name for item holding all IP addresses of platform's host.
configPayloadPlatformPort - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as payload name for item holding platform's cMsg domain server's TCP port.
configPayloadStreamCount - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as payload name for item holding configuration's count of data streams - the number of final event builders and event recorders.
configPayloadStreamId - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as payload name for item holding component's data streams id.
configuration() - Method in class org.jlab.coda.emu.Emu: Get the configuration of this CODA component in the form of a parsed XML document object that is loaded from a file when the configure command is executed.
configuration() - Method in interface org.jlab.coda.emu.support.codaComponent.CODAComponent: Get the configuration of this CODA component in the form of a parsed XML document object that is loaded from a file when the configure command is executed.
configure - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as type in message for the configure command.
configure(CommandAcceptor, int) - Method in class org.jlab.coda.emu.support.ui.SmartToolbar: Method configure ...
Configurer - Class in org.jlab.coda.emu.support.configurer: This class is a singleton and contains one static reference to a DOM builder and a DOM serializer.
Configurer() - Constructor for class org.jlab.coda.emu.support.configurer.Configurer
connected - Variable in class org.jlab.coda.emu.support.transport.DataTransportAdapter: Is this object connected?
consumerGet() - Method in class org.jlab.coda.emu.support.data.ByteBufferSupply: Get the next available item in ring buffer for getting data already written into.
containsModule(EmuModule) - Method in class org.jlab.coda.emu.EmuDataPath: Does this path contain the given EmuModule object?
containsModuleName(String) - Method in class org.jlab.coda.emu.EmuDataPath: Does this path contain a module of the given name?
ControlType - Enum in org.jlab.coda.emu.support.data: This enum specifies tag values associated with CODA control types used in CODA online components.
controlType - Variable in class org.jlab.coda.emu.support.data.RingItemAdapter: If this is a control event, what type of control is it (SYNC, GO, END, ...)?
copy(RingItem) - Method in interface org.jlab.coda.emu.support.data.RingItem: Copy the argument's data into this RingItem object.
copy(RingItem) - Method in class org.jlab.coda.emu.support.data.RingItemAdapter: Copy members of argument into this object (except for "reserved").
CrateAggregatingConsumer() - Constructor for class org.jlab.coda.emu.test.VardanERSAP.CrateAggregatingConsumer
crateAvailableSequences - Variable in class org.jlab.coda.emu.test.VardanERSAP: Track which sequence is currently available from each of the crate rings.
crateBarriers - Variable in class org.jlab.coda.emu.test.VardanERSAP: 1 barrier per stream
crateNextSequences - Variable in class org.jlab.coda.emu.test.VardanERSAP: Track which sequence the aggregating consumer wants next from each of the crate rings.
CrateProducer(int) - Constructor for class org.jlab.coda.emu.test.VardanERSAP.CrateProducer
crateRingBuffers - Variable in class org.jlab.coda.emu.test.VardanERSAP: 1 RingBuffer per stream.
crateRingItemCount - Variable in class org.jlab.coda.emu.test.VardanERSAP: Number of items in each ring buffer.
crateSequences - Variable in class org.jlab.coda.emu.test.VardanERSAP: 1 sequence per stream
createChannel(String, Map<String, String>, boolean, Emu, EmuModule, int) - Method in interface org.jlab.coda.emu.support.transport.DataTransport: This method creates a DataChannel object.
createChannel(String, Map<String, String>, boolean, Emu, EmuModule, int) - Method in class org.jlab.coda.emu.support.transport.DataTransportImplCmsg: This method creates a DataChannel object.
createChannel(String, Map<String, String>, boolean, Emu, EmuModule, int) - Method in class org.jlab.coda.emu.support.transport.DataTransportImplEmu: This method creates a DataChannel object.
createChannel(String, Map<String, String>, boolean, Emu, EmuModule, int) - Method in class org.jlab.coda.emu.support.transport.DataTransportImplEt: This method creates a DataChannel object.
createChannel(String, Map<String, String>, boolean, Emu, EmuModule, int) - Method in class org.jlab.coda.emu.support.transport.DataTransportImplFifo: This method creates a DataChannel object.
createChannel(String, Map<String, String>, boolean, Emu, EmuModule, int) - Method in class org.jlab.coda.emu.support.transport.DataTransportImplFile: This method creates a DataChannel object.
createCodaTag(boolean, boolean, boolean, boolean, int) - Static method in class org.jlab.coda.emu.support.data.Evio: Create a 16-bit, CODA-format tag for a ROC Raw Record or Physics Event out of 4 status bits and a 12-bit id.
createCodaTag(int, int) - Static method in class org.jlab.coda.emu.support.data.Evio: Create a 16-bit, CODA-format tag for a ROC Raw Record, Physics Event, or Data Transport Record out of 4-bit status/type and a 12-bit id.
createControlBuffer(ControlType, int, int, int, int, ByteOrder, boolean) - Static method in class org.jlab.coda.emu.support.data.Evio: Create a Control event with a ByteBuffer which is ready to read.
createControlEvent(ControlType, int, int, int, int, boolean) - Static method in class org.jlab.coda.emu.support.data.Evio: Create a Control event.
createEmus() - Method in class org.jlab.coda.emu.EmuFactory: Method to construct EMUs.
createRocRawRecordFast(int, int, int, int, int, int, long, ByteBuffer, CompactEventBuilder) - Static method in class org.jlab.coda.emu.support.data.Evio: Create an Evio ROC Raw record event/bank to be placed in a Data Transport record.

D

dalogMsg - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as type of dalog message periodically sent to rcServer.
DataChannel - Interface in org.jlab.coda.emu.support.transport: This interface defines an object that can send and receive data.
DataChannelAdapter - Class in org.jlab.coda.emu.support.transport: This class provides boilerplate code for the DataChannel interface (which includes the CODAStateMachine interface).
DataChannelAdapter(String, DataTransport, Map<String, String>, boolean, Emu, EmuModule, int) - Constructor for class org.jlab.coda.emu.support.transport.DataChannelAdapter: Constructor to create a new DataChannel instance.
DataChannelAdapter.ThreadState - Enum in org.jlab.coda.emu.support.transport: Keep track of output channel thread's state.
DataChannelImplCmsg - Class in org.jlab.coda.emu.support.transport: This class implement a data channel which gets data from or sends data to a cMsg server.
DataChannelImplCmsg(String, DataTransportImplCmsg, Map<String, String>, boolean, Emu, EmuModule, int) - Constructor for class org.jlab.coda.emu.support.transport.DataChannelImplCmsg: Constructor to create a new DataChannelImplCmsg instance.
DataChannelImplCmsg.ReceiveMsgCallback - Class in org.jlab.coda.emu.support.transport: This class defines the callback to be run when a message matching the subscription arrives.
DataChannelImplEmu - Class in org.jlab.coda.emu.support.transport: This class implement a data channel which gets-data-from/sends-data-to an Emu domain client/server.
DataChannelImplEmu(String, DataTransportImplEmu, Map<String, String>, boolean, Emu, EmuModule, int) - Constructor for class org.jlab.coda.emu.support.transport.DataChannelImplEmu: Constructor to create a new DataChannelImplEt instance.
DataChannelImplEt - Class in org.jlab.coda.emu.support.transport: This class implement a data channel which gets data from or sends data to an ET system.
DataChannelImplEt(String, DataTransportImplEt, Map<String, String>, boolean, Emu, EmuModule, int) - Constructor for class org.jlab.coda.emu.support.transport.DataChannelImplEt: Constructor to create a new DataChannelImplEt instance.
DataChannelImplFifo - Class in org.jlab.coda.emu.support.transport: This class implements a DataChannel to act as a fifo.
DataChannelImplFifo(String, DataTransportImplFifo, Map<String, String>, boolean, Emu, EmuModule) - Constructor for class org.jlab.coda.emu.support.transport.DataChannelImplFifo: Constructor DataChannelImplFifo creates a new DataChannelImplFifo instance.
DataChannelImplFile - Class in org.jlab.coda.emu.support.transport: Implementation of a DataChannel reading/writing from/to a file in EVIO format.
DataChannelImplFile(String, DataTransportImplFile, Map<String, String>, boolean, Emu, EmuModule, int) - Constructor for class org.jlab.coda.emu.support.transport.DataChannelImplFile: Constructor DataChannelImplFile creates a new DataChannelImplFile instance.
DataNode - Class in org.jlab.coda.emu.support.configurer: bug bug: certain methods must be run in the SwingUpdate thread.
DataNode(Node, int) - Constructor for class org.jlab.coda.emu.support.configurer.DataNode: Constructor DataNode creates a new DataNode instance and cleverly stores it in the given Node argument.
DataNotFoundException - Exception in org.jlab.coda.emu.support.configurer
DataNotFoundException(String) - Constructor for exception org.jlab.coda.emu.support.configurer.DataNotFoundException: Constructor DataNotFoundException creates a new DataNotFoundException instance.
DataNotFoundException(String, Throwable) - Constructor for exception org.jlab.coda.emu.support.configurer.DataNotFoundException: Constructor DataNotFoundException creates a new DataNotFoundException instance.
DataNotFoundException(Throwable) - Constructor for exception org.jlab.coda.emu.support.configurer.DataNotFoundException: Constructor DataNotFoundException creates a new DataNotFoundException instance.
dataRate - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants
dataTransport - Variable in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Object used by Emu to create this channel.
DataTransport - Interface in org.jlab.coda.emu.support.transport: This interface defines how data is transported and does not refer to a particular data connection.
DataTransportAdapter - Class in org.jlab.coda.emu.support.transport: This class provides a bare-bones implementation of the DataTransport interface (which includes the CODAStateMachine interface).
DataTransportAdapter(String, Map<String, String>, Emu) - Constructor for class org.jlab.coda.emu.support.transport.DataTransportAdapter: Constructor.
DataTransportException - Exception in org.jlab.coda.emu.support.transport: Class TransportException
DataTransportException(String) - Constructor for exception org.jlab.coda.emu.support.transport.DataTransportException: Constructor TransportException creates a new TransportException instance.
DataTransportException(Exception) - Constructor for exception org.jlab.coda.emu.support.transport.DataTransportException: Constructor TransportException creates a new TransportException instance.
DataTransportException(String, Exception) - Constructor for exception org.jlab.coda.emu.support.transport.DataTransportException: Constructor TransportException creates a new TransportException instance.
DataTransportImplCmsg - Class in org.jlab.coda.emu.support.transport: This class specifies a single cMsg server.
DataTransportImplCmsg(String, Map<String, String>, Emu) - Constructor for class org.jlab.coda.emu.support.transport.DataTransportImplCmsg: Constructor.
DataTransportImplEmu - Class in org.jlab.coda.emu.support.transport: This class specifies a single cMsg server.
DataTransportImplEmu(String, Map<String, String>, Emu) - Constructor for class org.jlab.coda.emu.support.transport.DataTransportImplEmu: Constructor called during "download".
DataTransportImplEt - Class in org.jlab.coda.emu.support.transport: This class specifies a single ET system to connect to.
DataTransportImplEt(String, Map<String, String>, Emu) - Constructor for class org.jlab.coda.emu.support.transport.DataTransportImplEt: Constructor.
DataTransportImplFifo - Class in org.jlab.coda.emu.support.transport: Implement a DataTransport that creates FIFO DataChannels based on the RingBuffer.
DataTransportImplFifo(String, Map<String, String>, Emu) - Constructor for class org.jlab.coda.emu.support.transport.DataTransportImplFifo: Constructor.
DataTransportImplFile - Class in org.jlab.coda.emu.support.transport: Implement a DataTransport that uses DataChannels based on EVIO format files.
DataTransportImplFile(String, Map<String, String>, Emu) - Constructor for class org.jlab.coda.emu.support.transport.DataTransportImplFile: Constructor.
debug(String) - Method in class org.jlab.coda.emu.support.logger.Logger: Method debug ...
debug(String, Throwable) - Method in class org.jlab.coda.emu.support.logger.Logger: Method debug ...
debug(Throwable) - Method in class org.jlab.coda.emu.support.logger.Logger: Method debug ...
debug(String, String) - Method in class org.jlab.coda.emu.support.logger.Logger: Method debug ...
debug(String, Object) - Method in class org.jlab.coda.emu.support.logger.Logger: Method debug ...
debug(String, String, String) - Method in class org.jlab.coda.emu.support.logger.Logger: Method debug ...
debug(String, long) - Method in class org.jlab.coda.emu.support.logger.Logger: Method debug ...
debug(String, long, long) - Method in class org.jlab.coda.emu.support.logger.Logger: Method debug ...
debug(String, boolean) - Method in class org.jlab.coda.emu.support.logger.Logger: Method debug ...
DEBUG - Static variable in class org.jlab.coda.emu.support.logger.LoggingEvent: DEBUG msg.
debugClassLoader(String, Object) - Method in class org.jlab.coda.emu.support.logger.Logger: Method debugClassLoader ...
DebugFrame - Class in org.jlab.coda.emu.support.ui
DebugFrame(Emu) - Constructor for class org.jlab.coda.emu.support.ui.DebugFrame
decrementCounter() - Method in class org.jlab.coda.emu.support.data.ByteBufferItem: Called by buffer user by way of ByteBufferSupply.release(ByteBufferItem) if no longer using it so it may be reused later.
deepCopy(ByteBuffer) - Static method in class org.jlab.coda.emu.EmuUtilities: Method to deep copy a ByteBuffer object.
DEFAULT_NAMESPACES - Static variable in class org.jlab.coda.emu.support.configurer.Configurer: Default namespaces support (true).
DEFAULT_PARSE_MODE - Static variable in class org.jlab.coda.emu.support.configurer.Configurer: Field DEFAULT_PARSE_MODE
DEFAULT_SCHEMA_VALIDATION - Static variable in class org.jlab.coda.emu.support.configurer.Configurer: Default Schema validation support (false).
DEFAULT_VALIDATION - Static variable in class org.jlab.coda.emu.support.configurer.Configurer: Default validation support (false).
description() - Method in enum org.jlab.coda.emu.support.codaComponent.CODAClass: Get the description of this transition.
description() - Method in enum org.jlab.coda.emu.support.codaComponent.CODATransition: Get the description of this transition.
description() - Method in class org.jlab.coda.emu.support.control.Command: Get the description of the Run Control command.
destinationNames - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants
disableOutput - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as type in message for the disable-output-channels command.
domain - Variable in class org.jlab.coda.emu.support.transport.EmuDomainServer
domain - Variable in class org.jlab.coda.emu.test.LocalEmuDomainServer
doubleToString(double, int) - Static method in class org.jlab.coda.emu.EmuUtilities: Method to convert a double to a string with a specified number of decimal places.
download() - Method in class org.jlab.coda.emu.modules.ModuleAdapter: This method implements the DOWNLOAD transition of the CODA run control state machine.
download() - Method in interface org.jlab.coda.emu.support.codaComponent.CODAStateMachine: This method implements the DOWNLOAD transition of the CODA run control state machine.
download() - Method in class org.jlab.coda.emu.support.codaComponent.CODAStateMachineAdapter: This method implements the DOWNLOAD transition of the CODA run control state machine.
download - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as type in message for the get-run-number command.
download() - Method in class org.jlab.coda.emu.support.transport.DataTransportImplEt: This method implements the DOWNLOAD transition of the CODA run control state machine.
Dummy - Class in org.jlab.coda.emu.modules: This class is a (not so) bare bones module used for testing and as a template.
Dummy(String, Map<String, String>, Emu) - Constructor for class org.jlab.coda.emu.modules.Dummy: Constructor.

E

Emu - Class in org.jlab.coda.emu: This is the main class of the EMU (Event Management Unit) program.
Emu(String, String, boolean, boolean) - Constructor for class org.jlab.coda.emu.Emu: Constructor.
emu - Variable in class org.jlab.coda.emu.modules.ModuleAdapter: Emu this module belongs to.
emu - Variable in class org.jlab.coda.emu.support.messaging.CMSGPortal: Store a reference to the EMU here (which is the only object that uses this CMSGPortal object).
emu - Variable in class org.jlab.coda.emu.support.transport.DataChannelAdapter: EMU object that created this channel.
emu - Variable in class org.jlab.coda.emu.support.transport.DataTransportAdapter: Emu object that created this transport.
Emu.StatusReportingThread - Class in org.jlab.coda.emu: Class defining thread which reports the EMU status to Run Control.
EmuBlastee - Class in org.jlab.coda.emu.test.blast: Created by timmer on 4/10/17.
EmuBlastee(String[]) - Constructor for class org.jlab.coda.emu.test.blast.EmuBlastee: Constructor.
EmuBlastee2 - Class in org.jlab.coda.emu.test.blast: Created by timmer on 4/10/17.
EmuBlastee2(String[]) - Constructor for class org.jlab.coda.emu.test.blast.EmuBlastee2: Constructor.
EmuBlastee3 - Class in org.jlab.coda.emu.test.blast: Created by timmer on 4/10/17.
EmuBlastee3(String[]) - Constructor for class org.jlab.coda.emu.test.blast.EmuBlastee3: Constructor.
EmuBlaster - Class in org.jlab.coda.emu.test.blast: This class copies much from the RocSimulation module.
EmuBlaster(String[]) - Constructor for class org.jlab.coda.emu.test.blast.EmuBlaster
EmuBlaster2 - Class in org.jlab.coda.emu.test.blast: This class copies much from the RocSimulation module.
EmuBlaster2(String[]) - Constructor for class org.jlab.coda.emu.test.blast.EmuBlaster2
EMUCommander - Class in org.jlab.coda.emu.support.ui: EMUCommander - a tool to send commands to EMUs and log responses.
EMUCommander() - Constructor for class org.jlab.coda.emu.support.ui.EMUCommander: No-arg constructor.
EMUCommander.CallbackAdapter - Class in org.jlab.coda.emu.support.ui
EMUCommander.CommandHandler - Class in org.jlab.coda.emu.support.ui: Defines code to execute depending on command used.
EmuDataPath - Class in org.jlab.coda.emu: This class represents data flow through connected EMU modules.
EmuDataPath(String, String, String) - Constructor for class org.jlab.coda.emu.EmuDataPath: Constructor.
EmuDataPath.Module - Class in org.jlab.coda.emu: Class to store module-related data.
EmuDomainReceiver - Class in org.jlab.coda.emu.test: This class is designed to be a test receiver for a module who has emu domain output channels.
EmuDomainReceiver(String[]) - Constructor for class org.jlab.coda.emu.test.EmuDomainReceiver: Constructor.
EmuDomainServer - Class in org.jlab.coda.emu.support.transport: Much of this copied from the the RCMulticastDomain's RCMulticast class.
EmuDomainServer(int, String, String, DataTransportImplEmu) - Constructor for class org.jlab.coda.emu.support.transport.EmuDomainServer
EmuDomainTcpServer - Class in org.jlab.coda.emu.support.transport: This class is the cMsg Emu domain TCP server run inside of an EMU.
EmuDomainTcpServer(EmuDomainServer, int) - Constructor for class org.jlab.coda.emu.support.transport.EmuDomainTcpServer: Constructor.
EmuDomainUdpListener - Class in org.jlab.coda.emu.support.transport: Basically a copy of RCMulticastDomain's rcListeningThread class.
EmuDomainUdpListener(EmuDomainServer, int, String, String) - Constructor for class org.jlab.coda.emu.support.transport.EmuDomainUdpListener: Constructor.
EmuEventNotify - Class in org.jlab.coda.emu: This class is designed for allowing the Emu to wait until a DataChannel or Transport or Module has received a desired event.
EmuEventNotify() - Constructor for class org.jlab.coda.emu.EmuEventNotify: Constructor with default wait time of 1 seconds.
EmuException - Exception in org.jlab.coda.emu: Type of exception thrown in modules of EMU.
EmuException() - Constructor for exception org.jlab.coda.emu.EmuException: Constructs a new exception with null as its detail message.
EmuException(String) - Constructor for exception org.jlab.coda.emu.EmuException: Constructs a new exception with the specified detail message.
EmuException(String, Throwable) - Constructor for exception org.jlab.coda.emu.EmuException: Constructs a new exception with the specified detail message and cause.
EmuException(Throwable) - Constructor for exception org.jlab.coda.emu.EmuException: Constructs a new exception with the specified cause and a detail message of (cause==null ? null : cause.toString()) (which typically contains the class and detail message of cause).
EmuFactory - Class in org.jlab.coda.emu: This class handles the creation of one or more EMUs that are to be run in a single Java JVM.
EmuFactory() - Constructor for class org.jlab.coda.emu.EmuFactory
EmuModule - Interface in org.jlab.coda.emu: Interface EmuModule a simple interface to a modular part of the EMU.
EmuUtilities - Class in org.jlab.coda.emu: Collection of useful methods.
EmuUtilities() - Constructor for class org.jlab.coda.emu.EmuUtilities
enabled - Static variable in class org.jlab.coda.emu.support.logger.StdOutAppender: Field enabled
enableOutput - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as type in message for the enable-output-channels command.
end() - Method in class org.jlab.coda.emu.modules.Dummy: This method implements the END transition of the CODA run control state machine.
end() - Method in class org.jlab.coda.emu.modules.EventRecording: This method implements the END transition of the CODA run control state machine.
end() - Method in class org.jlab.coda.emu.modules.FarmController: This method implements the END transition of the CODA run control state machine.
end() - Method in class org.jlab.coda.emu.modules.FastEventBuilder: This method implements the END transition of the CODA run control state machine.
end() - Method in class org.jlab.coda.emu.modules.ModuleAdapter: This method implements the END transition of the CODA run control state machine.
end() - Method in class org.jlab.coda.emu.modules.RocFixedRateSimulation: This method implements the END transition of the CODA run control state machine.
end() - Method in class org.jlab.coda.emu.modules.RocSimulation: This method implements the END transition of the CODA run control state machine.
end() - Method in class org.jlab.coda.emu.modules.ToFile: This method implements the END transition of the CODA run control state machine.
end() - Method in class org.jlab.coda.emu.modules.TsFixedRateSimulation: This method implements the END transition of the CODA run control state machine.
end() - Method in class org.jlab.coda.emu.modules.TsSimulation: This method implements the END transition of the CODA run control state machine.
end() - Method in interface org.jlab.coda.emu.support.codaComponent.CODAStateMachine: This method implements the END transition of the CODA run control state machine.
end() - Method in class org.jlab.coda.emu.support.codaComponent.CODAStateMachineAdapter: This method implements the END transition of the CODA run control state machine.
end - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as type in message for the set-run-type command.
end() - Method in class org.jlab.coda.emu.support.transport.DataChannelImplCmsg: This method implements the END transition of the CODA run control state machine.
end() - Method in class org.jlab.coda.emu.support.transport.DataChannelImplEmu: This method implements the END transition of the CODA run control state machine.
end() - Method in class org.jlab.coda.emu.support.transport.DataChannelImplEt: This method implements the END transition of the CODA run control state machine.
end() - Method in class org.jlab.coda.emu.support.transport.DataChannelImplFifo: This method implements the END transition of the CODA run control state machine.
end() - Method in class org.jlab.coda.emu.support.transport.DataChannelImplFile: This method implements the END transition of the CODA run control state machine.
end() - Method in class org.jlab.coda.emu.support.transport.DataTransportImplCmsg: This method implements the END transition of the CODA run control state machine.
end() - Method in class org.jlab.coda.emu.support.transport.DataTransportImplFifo: This method implements the END transition of the CODA run control state machine.
endCallback - Variable in class org.jlab.coda.emu.modules.ModuleAdapter: Object used by Emu to be notified of END event arrival.
endCallback - Variable in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Object used by Emu to be notified of END event arrival.
endDraggingFrame(JComponent) - Method in class org.jlab.coda.emu.support.ui.MDIDesktopManager
endResizingFrame(JComponent) - Method in class org.jlab.coda.emu.support.ui.MDIDesktopManager
endThread() - Method in class org.jlab.coda.emu.modules.RocSimulation.EventGeneratingThread: Kill this thread which is sending messages/data to other end of emu socket.
endWait() - Method in class org.jlab.coda.emu.EmuEventNotify: This method allows the waitForEvent() method to return immediately.
ensureCapacity(int) - Method in class org.jlab.coda.emu.support.data.ByteBufferItem: Make sure the buffer is the size needed.
epThreadsSetInConfig - Variable in class org.jlab.coda.emu.modules.ModuleAdapter: Were the number of event producing threads explicitly set in config file?
error(String) - Method in class org.jlab.coda.emu.support.logger.Logger: Method error ...
error(String, long) - Method in class org.jlab.coda.emu.support.logger.Logger: Method error ...
error(String, String) - Method in class org.jlab.coda.emu.support.logger.Logger: Method error ...
error(String, String, Throwable) - Method in class org.jlab.coda.emu.support.logger.Logger: Method error ...
error(Throwable) - Method in class org.jlab.coda.emu.support.logger.Logger: Method error ...
error(String, Throwable) - Method in class org.jlab.coda.emu.support.logger.Logger: Method error ...
ERROR - Static variable in class org.jlab.coda.emu.support.logger.LoggingEvent: ERROR msg, 9 - 12.
errorMsg - Variable in class org.jlab.coda.emu.Emu: Error message.
errorMsg - Variable in class org.jlab.coda.emu.modules.ModuleAdapter: Possible error message.
errorMsg - Variable in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Channel error message.
errorMsg - Variable in class org.jlab.coda.emu.support.transport.DataTransportAdapter: Possible error message.
event - Variable in class org.jlab.coda.emu.support.data.RingItemAdapter: Event to wrap.
eventCount - Variable in class org.jlab.coda.emu.support.data.RingItemAdapter: The number of CODA events (triggers) contained in this evio bank.
eventCount - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants
eventCount64 - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants
eventCountTotal - Variable in class org.jlab.coda.emu.modules.ModuleAdapter: Total number of evio events written to the outputs.
EventGeneratingThread(int, ThreadGroup, String) - Constructor for class org.jlab.coda.emu.modules.RocFixedRateSimulation.EventGeneratingThread
EventGeneratingThread(int, ThreadGroup, String) - Constructor for class org.jlab.coda.emu.modules.RocSimulation.EventGeneratingThread
eventProducingThreads - Variable in class org.jlab.coda.emu.modules.ModuleAdapter: Number of event producing threads in operation.
eventRate - Variable in class org.jlab.coda.emu.modules.ModuleAdapter: Instantaneous event rate in Hz over the last time period of length ModuleAdapter.statGatheringPeriod.
eventRate - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants
EventRecording - Class in org.jlab.coda.emu.modules: This class implements an event recorder.
EventRecording(String, Map<String, String>, Emu) - Constructor for class org.jlab.coda.emu.modules.EventRecording: Constructor creates a new EventRecording instance.
eventsPerBuffer - Variable in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Number of events to place into one data buffer for the output channel.
eventToOutputChannel(RingItem, int, int) - Method in class org.jlab.coda.emu.modules.ModuleAdapter: This method is used to place an item onto a specified ring buffer of a single, specified output channel.
eventToOutputChannel(RingItem, DataChannel, int) - Method in class org.jlab.coda.emu.modules.ModuleAdapter: This method is used to place an item onto a specified ring buffer of a single, specified output channel.
eventToOutputRing(int, ByteBuffer, ByteBufferItem, ByteBufferSupply) - Method in class org.jlab.coda.emu.modules.RocFixedRateSimulation: This method is called by a running EventGeneratingThread.
eventToOutputRing(int, ByteBuffer, ByteBufferItem, ByteBufferSupply) - Method in class org.jlab.coda.emu.modules.RocSimulation: This method is called by a running EventGeneratingThread.
EventType - Enum in org.jlab.coda.emu.support.data: This enum specifies values associated with CODA event types used in CODA online components.
eventType - Variable in class org.jlab.coda.emu.support.data.RingItemAdapter: What type of CODA events are contained in this bank (RocRaw, Physics, Control, User, ...)? Only one type is stored in one RingItem object.
Evio - Class in org.jlab.coda.emu.support.data: This class is used as a layer on top of evio to handle CODA3 specific details.
execute(Command) - Method in class org.jlab.coda.emu.Emu: This method takes a Command object and attempts to execute it.
exit - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as type in message for the exit command.

F

FarmController - Class in org.jlab.coda.emu.modules: This class is a Farm Controlling module.
FarmController(String, Map<String, String>, Emu) - Constructor for class org.jlab.coda.emu.modules.FarmController: Constructor creates a new EventRecording instance.
FastEventBuilder - Class in org.jlab.coda.emu.modules: This class implements an event builder.
FastEventBuilder(String, Map<String, String>, Emu) - Constructor for class org.jlab.coda.emu.modules.FastEventBuilder: Constructor creates a new EventBuilding instance.
FastEventBuilder.BuildingThread - Class in org.jlab.coda.emu.modules: This thread is started by the PRESTART transition.
FILE_PARSE_MODE - Static variable in class org.jlab.coda.emu.support.configurer.Configurer: Field FILE_PARSE_MODE
filename - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants
fileWritingPayload - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as payload name for flag telling emu to stop/start file writing.
fillHistogram() - Method in class org.jlab.coda.emu.support.data.Statistics: Fill the histogram integer array with data points.
firstEventNumber - Variable in class org.jlab.coda.emu.support.data.RingItemAdapter: The event number of the first CODA event in this evio bank.
fromDebugGui(boolean) - Method in class org.jlab.coda.emu.support.control.Command: Set whether this command is from the debug gui or run control.

G

generateData(int, int, boolean, long) - Static method in class org.jlab.coda.emu.support.data.Evio: Generate a single data block bank of fake data.
generateInputPanel() - Method in class org.jlab.coda.emu.support.ui.DebugFrame: This method adds an internal frame used to grab input for emu commands that need input.
GenericCallback - Class in org.jlab.coda.emu.support.messaging: Created by IntelliJ IDEA.
GenericCallback() - Constructor for class org.jlab.coda.emu.support.messaging.GenericCallback
get(String) - Static method in enum org.jlab.coda.emu.support.codaComponent.CODAClass: Map from type of incoming message from CODA class name to a particular enum.
get(String) - Static method in enum org.jlab.coda.emu.support.codaComponent.CODACommand: Map from type of incoming message from run control to a particular enum.
get(String) - Static method in enum org.jlab.coda.emu.support.codaComponent.CODAState: Map from CODAState name to a particular enum.
get() - Method in class org.jlab.coda.emu.support.data.ByteBufferSupply: Get the next available item in ring buffer for writing/reading data.
get(String) - Static method in enum org.jlab.coda.emu.support.transport.TransportType: Map from type of incoming message from CODA class name to a particular enum.
get() - Method in class org.jlab.coda.emu.test.VardanERSAP.CrateAggregatingConsumer: Get the next available item from each crate ring buffer.
get() - Method in class org.jlab.coda.emu.test.VardanERSAP.CrateProducer: Get the next available item in ring buffer for writing/reading data.
get() - Method in class org.jlab.coda.emu.test.VardanERSAP.OutputRingConsumer: Get the next available item from outupt ring buffer.
getArg(String) - Method in class org.jlab.coda.emu.support.control.Command: Get the object (a cMsgPayloadItem object) associated with this tag (unique mapping).
getAsIs() - Method in class org.jlab.coda.emu.support.data.ByteBufferSupply: Get the next available item in ring buffer for writing/reading data.
getAttachment() - Method in interface org.jlab.coda.emu.support.data.Attached: This method gets an attached object.
getAttachment() - Method in class org.jlab.coda.emu.support.data.RingItemAdapter: This method gets an attached object.
getAttr(String) - Method in interface org.jlab.coda.emu.EmuModule: Get the named attribute from the config file of this module.
getAttr(String) - Method in class org.jlab.coda.emu.modules.ModuleAdapter: Get the named attribute from the config file of this module.
getAttr(String) - Method in interface org.jlab.coda.emu.support.transport.DataTransport: This method gets an attribute as a String object.
getAttr(String) - Method in class org.jlab.coda.emu.support.transport.DataTransportAdapter: This method gets an attribute as a String object.
getBuffer() - Method in class org.jlab.coda.emu.support.data.ByteBufferItem: Get the contained ByteBuffer.
getBuffer() - Method in interface org.jlab.coda.emu.support.data.RingItem: Get the ByteBuffer object (containing evio data) referenced by this ring item if any.
getBuffer() - Method in class org.jlab.coda.emu.support.data.RingItemAdapter: Get the ByteBuffer object (containing evio data) referenced by this ring item if any.
getBufferAsIs() - Method in class org.jlab.coda.emu.support.data.ByteBufferItem: Get the contained ByteBuffer without any modifications.
getBufferLevel() - Method in class org.jlab.coda.emu.Emu: Get the smallest number of evio-events/et-buffer that connected DC/PEB found.
getBufferLevel - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as type in message for the get-buffer-level command.
getBufferSize() - Method in class org.jlab.coda.emu.support.data.ByteBufferItem: Get the size in bytes of the contained ByteBuffer.
getByteBufferItem() - Method in interface org.jlab.coda.emu.support.data.RingItem: Get the ByteBufferItem object used to wrap the referenced ByteBuffer (if any).
getByteBufferItem() - Method in class org.jlab.coda.emu.support.data.RingItemAdapter: Get the ByteBufferItem object used to wrap the referenced ByteBuffer (if any).
getByteBufferSupply() - Method in interface org.jlab.coda.emu.support.data.RingItem: Get the ByteBufferSupply object used to create the referenced ByteBuffer (if any).
getByteBufferSupply() - Method in class org.jlab.coda.emu.support.data.RingItemAdapter: Get the ByteBufferSupply object used to create the referenced ByteBuffer (if any).
getByteOrder() - Method in class org.jlab.coda.emu.support.data.PayloadBuffer: What is the byte order of this data?
getByteOrder() - Method in interface org.jlab.coda.emu.support.data.RingItem: Get the byte order of the data contained in this object.
getByteOrder() - Method in class org.jlab.coda.emu.support.data.RingItemAdapter: Get the byte order of the data contained in this object.
getCause() - Method in exception org.jlab.coda.emu.support.transport.DataTransportException: Method getCause returns the cause of this TransportException object.
getCmdString() - Method in enum org.jlab.coda.emu.support.codaComponent.CODACommand: Get the string coming from Run Control specifying this command.
getCmsgConnection() - Method in class org.jlab.coda.emu.support.transport.DataTransportImplCmsg: Get the cmsg connection object.
getCmsgPortal() - Method in class org.jlab.coda.emu.Emu: Get the cmsgPortal object of this emu.
getCmsgServer() - Method in class org.jlab.coda.emu.support.messaging.CMSGPortal: Get the connection object to the cMsg server of runcontrol platform.
getCmsgUDL() - Method in class org.jlab.coda.emu.Emu: Get the UDL used to connect to the cMsg server by this CODA component.
getCmsgUDL() - Method in interface org.jlab.coda.emu.support.codaComponent.CODAComponent: Get the UDL used to connect to the cMsg server by this CODA component.
getCodaClass() - Method in class org.jlab.coda.emu.Emu: Get the class of this CODA component (e.g.
getCodaClass() - Method in interface org.jlab.coda.emu.support.codaComponent.CODAComponent: Get the class of this CODA component (e.g.
getCodaClass - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as type in message for get-coda-class command.
getCodaClassObject() - Method in class org.jlab.coda.emu.Emu: Get the CODAClass of this emu.
getCodaClassResponse - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as type in message for response to get-coda-class command.
getCodaCommand() - Method in class org.jlab.coda.emu.support.control.Command: Get the static command object representing the Run Control command.
getCodaid() - Method in class org.jlab.coda.emu.Emu: Get the id of this CODA component.
getCodaid() - Method in interface org.jlab.coda.emu.support.codaComponent.CODAComponent: Get the id of this CODA component.
getConfigId - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as type in message for the get-config-id command.
getConfigIdResponse - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as type in message for response to get-config-id command.
getConsumerSequence() - Method in class org.jlab.coda.emu.support.data.ByteBufferItem: Get the sequence of this item for consumer.
getContainer() - Method in class org.jlab.coda.emu.support.configurer.DataNode
getControlType(int) - Static method in enum org.jlab.coda.emu.support.data.ControlType: Obtain the enum from the value.
getControlType() - Method in interface org.jlab.coda.emu.support.data.RingItem: If this is control event, this method returns the type of control event, otherwise it returns null.
getControlType() - Method in class org.jlab.coda.emu.support.data.RingItemAdapter: If this is control event, this method returns the type of control event, otherwise it returns null.
getControlTypeFromOrdinal(int) - Static method in enum org.jlab.coda.emu.support.data.ControlType: Obtain the enum from the ordinal value.
getData() - Method in class org.jlab.coda.emu.support.logger.LoggingEvent: Method getData returns the data of this LoggingEvent object.
getDataNode(Node) - Static method in class org.jlab.coda.emu.support.configurer.DataNode: Method to get the DataNode object associated with a particular Node object.
getDataPath() - Method in class org.jlab.coda.emu.Emu: Get the data path object that directs how the run control commands are distributed among the EMU parts.
getDataStreamCount() - Method in class org.jlab.coda.emu.Emu: Get the total number of data streams in the configuration which contains this emu.
getDataStreamId() - Method in class org.jlab.coda.emu.Emu: Get the id number of the data stream this emu is a part of.
getDataTransport() - Method in interface org.jlab.coda.emu.support.transport.DataChannel: Get the DataTransport object used to create this data channel.
getDataTransport() - Method in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Get the DataTransport object used to create this data channel.
getDescription() - Method in enum org.jlab.coda.emu.support.codaComponent.CODACommand: Get this command's description.
getDescription() - Method in enum org.jlab.coda.emu.support.codaComponent.CODAState: Get the description of this state.
getDescription() - Method in interface org.jlab.coda.emu.support.codaComponent.CODAStateIF: Get the description of this state.
getEmuModules() - Method in class org.jlab.coda.emu.EmuDataPath: Get the linked list of the EmuModules in this path.
getEndCallback() - Method in class org.jlab.coda.emu.modules.ModuleAdapter: This method gets the callback object previously registered by the caller used to notify upon the arrival of an END event.
getEndCallback() - Method in interface org.jlab.coda.emu.support.codaComponent.CODAStateMachine: This method gets the callback object previously registered by the caller used to notify upon the arrival of an END event.
getEndCallback() - Method in class org.jlab.coda.emu.support.codaComponent.CODAStateMachineAdapter: This method gets the callback object previously registered by the caller used to notify upon the arrival of an END event.
getEndCallback() - Method in class org.jlab.coda.emu.support.transport.DataChannelAdapter: This method gets the callback object previously registered by the caller used to notify upon the arrival of an END event.
getEndingTimeLimit() - Method in class org.jlab.coda.emu.Emu: This method gets the amount of milliseconds to wait for an END command to succeed before going to an ERROR state.
getError() - Method in class org.jlab.coda.emu.Emu: Get any available error information.
getError() - Method in class org.jlab.coda.emu.modules.ModuleAdapter: Get any available error information.
getError() - Method in interface org.jlab.coda.emu.support.codaComponent.StatedObject: Get any available error information.
getError() - Method in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Get any available error information.
getError() - Method in class org.jlab.coda.emu.support.transport.DataTransportAdapter: Get any available error information.
getError() - Method in class org.jlab.coda.emu.support.ui.EMUCommander.CommandHandler: Get any available error information.
getEvent() - Method in interface org.jlab.coda.emu.support.data.RingItem: Get the evio event object contained in this ring item if any.
getEvent() - Method in class org.jlab.coda.emu.support.data.RingItemAdapter: Get the evio event object contained in this ring item if any.
getEventCount() - Method in interface org.jlab.coda.emu.support.data.RingItem: Get the number of ROC events in this object's data.
getEventCount() - Method in class org.jlab.coda.emu.support.data.RingItemAdapter: Get the number of ROC events in this object's data.
getEventProducingThreadCount() - Method in interface org.jlab.coda.emu.EmuModule: Get the number of threads which produce events to be placed in output channels.
getEventProducingThreadCount() - Method in class org.jlab.coda.emu.modules.ModuleAdapter: Get the number of threads which produce events to be placed in output channels.
getEventsInGroup() - Method in class org.jlab.coda.emu.support.transport.DataTransportImplEt: Gets the number of events per group in the opened ET system.
getEventTime() - Method in class org.jlab.coda.emu.support.logger.LoggingEvent: Method getEventTime returns the eventTime of this LoggingEvent object.
getEventType(int) - Static method in enum org.jlab.coda.emu.support.data.EventType: Obtain the enum from the value.
getEventType() - Method in interface org.jlab.coda.emu.support.data.RingItem: Get the type of event (ROC raw, physics, user, control , etc) this is.
getEventType() - Method in class org.jlab.coda.emu.support.data.RingItemAdapter: Get the type of event (ROC raw, physics, user, control , etc) this is.
getExpid() - Method in class org.jlab.coda.emu.Emu: Get the experiment id (expid) of this CODA component.
getExpid() - Method in interface org.jlab.coda.emu.support.codaComponent.CODAComponent: Get the experiment id (expid) of this CODA component.
getFileOutputCount() - Method in class org.jlab.coda.emu.Emu: Get the number of file output channels in this emu.
getFillLevel() - Method in class org.jlab.coda.emu.support.data.ByteBufferSupply: What percentage of the byte buffers are being used? If this ring is full (of unused buffers), it corresponds to an empty input or output channel (0%).
getFirstEventNumber() - Method in interface org.jlab.coda.emu.support.data.RingItem: Get the first event number in this object's data.
getFirstEventNumber() - Method in class org.jlab.coda.emu.support.data.RingItemAdapter: Get the first event number in this object's data.
getForce() - Method in class org.jlab.coda.emu.support.data.ByteBufferItem: Get the flag used to suggest a forced write to a consumer.
getFormatedData() - Method in class org.jlab.coda.emu.support.logger.LoggingEvent: Method getFormatedData returns the formatedData of this LoggingEvent object.
getFormatedLevel() - Method in class org.jlab.coda.emu.support.logger.LoggingEvent: Get the string associated with the format level of this event.
getFramework() - Method in class org.jlab.coda.emu.Emu: Get the debug GUI object.
getGuiGroup() - Method in enum org.jlab.coda.emu.support.codaComponent.CODACommand
getGuiGroup(int) - Static method in enum org.jlab.coda.emu.support.codaComponent.CODACommand: This method returns an EnumSet object of all the CODACommands which are of the given gui group.
getHistogram() - Method in class org.jlab.coda.emu.support.data.Statistics: Method to get the histogram array of ints.
getHostName() - Method in class org.jlab.coda.emu.Emu: Get the name of the host this CODA component is running on.
getHostName() - Method in interface org.jlab.coda.emu.support.codaComponent.CODAComponent: Get the name of the host this CODA component is running on.
getID() - Method in interface org.jlab.coda.emu.support.transport.DataChannel: Get the CODA ID number of the CODA component connected to this data channel.
getID() - Method in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Get the CODA ID number of the CODA component connected to this data channel.
getInChannels() - Method in class org.jlab.coda.emu.Emu: Get list of input channels.
getInputChannel() - Method in class org.jlab.coda.emu.modules.ToFile: Get the one input channel in use.
getInputChannelCount() - Method in class org.jlab.coda.emu.Emu: Get out the number of input channels to the first module.
getInputChannels() - Method in interface org.jlab.coda.emu.EmuModule: Get the input channels of this EmuModule object.
getInputChannels() - Method in class org.jlab.coda.emu.modules.ModuleAdapter: Get the input channels of this EmuModule object.
getInputChannels() - Method in class org.jlab.coda.emu.modules.RocFixedRateSimulation: Get the input channels of this EmuModule object.
getInputChannels() - Method in class org.jlab.coda.emu.modules.RocSimulation: Get the input channels of this EmuModule object.
getInputLevel(int) - Method in class org.jlab.coda.emu.modules.FastEventBuilder.BuildingThread: Get the input level (how full is the ring buffer 0-100) of a single input channel
getInputLevel() - Method in interface org.jlab.coda.emu.support.transport.DataChannel: Get the relative fill level (0-100) of the ring of this input channel.
getInputLevel() - Method in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Get the relative fill level (0-100) of the ring of this input channel.
getInputLevel() - Method in class org.jlab.coda.emu.support.transport.DataChannelImplCmsg: Get the relative fill level (0-100) of the ring of this input channel.
getInputLevel() - Method in class org.jlab.coda.emu.support.transport.DataChannelImplEmu: Get the relative fill level (0-100) of the ring of this input channel.
getInputLevel() - Method in class org.jlab.coda.emu.support.transport.DataChannelImplEt: Get the relative fill level (0-100) of the ring of this input channel.
getInputLevels() - Method in interface org.jlab.coda.emu.EmuModule: Get array containing the relative fill level (0-100) of each input channel's ring.
getInputLevels() - Method in class org.jlab.coda.emu.modules.ModuleAdapter: Get array containing the relative fill level (0-100) of each input channel's ring.
getInputNames() - Method in interface org.jlab.coda.emu.EmuModule: Get the names of the input channels of this EmuModule object.
getInputNames() - Method in class org.jlab.coda.emu.modules.ModuleAdapter: Get the names of the input channels of this EmuModule object.
getInputType() - Method in enum org.jlab.coda.emu.support.codaComponent.CODACommand
getIntAttr(String) - Method in interface org.jlab.coda.emu.EmuModule: Get the named attribute, as an integer, from the config file of this module.
getIntAttr(String) - Method in class org.jlab.coda.emu.modules.ModuleAdapter: Get the named attribute, as an integer, from the config file of this module.
getIntAttr(String) - Method in interface org.jlab.coda.emu.support.transport.DataTransport: This method gets an attribute as an int.
getIntAttr(String) - Method in class org.jlab.coda.emu.support.transport.DataTransportAdapter: This method gets an attribute as an int.
getInternalRingCount() - Method in interface org.jlab.coda.emu.EmuModule: Get the number of items this EmuModule object has in its internal rings.
getInternalRingCount() - Method in class org.jlab.coda.emu.modules.FastEventBuilder: Get the number of items this EmuModule object has in its internal rings.
getInternalRingCount() - Method in class org.jlab.coda.emu.modules.ModuleAdapter: Get the number of items this EmuModule object has in its internal rings.
getInternalRingCount() - Method in class org.jlab.coda.emu.modules.RocFixedRateSimulation: Get the number of items this EmuModule object has in its internal rings.
getInternalRingCount() - Method in class org.jlab.coda.emu.modules.RocSimulation: Get the number of items this EmuModule object has in its internal rings.
getLevel() - Method in class org.jlab.coda.emu.support.configurer.DataNode
getLevel() - Method in class org.jlab.coda.emu.support.logger.LoggingEvent: Method getLevel returns the level of this LoggingEvent object.
getLocalEtSystem() - Method in class org.jlab.coda.emu.support.transport.DataTransportImplEt: Get the locally created ET system object, if any.
getLocation() - Method in class org.jlab.coda.emu.support.logger.LoggingEvent: Method getLocation returns the location of this LoggingEvent object.
getLogger() - Method in class org.jlab.coda.emu.Emu: Get the Logger this emu uses.
getMaximumQueueSize() - Method in class org.jlab.coda.emu.support.messaging.GenericCallback: Method getMaximumCueSize returns the maximumCueSize of this transitionHandler object.
getMaximumQueueSize() - Method in class org.jlab.coda.emu.support.transport.DataChannelImplCmsg.ReceiveMsgCallback
getMaximumThreads() - Method in class org.jlab.coda.emu.support.messaging.GenericCallback: Method getMaximumThreads returns the maximumThreads of this transitionHandler object.
getMessage() - Method in class org.jlab.coda.emu.support.control.Command: Get the cMsg message containing the Run Control command.
getMessage() - Method in class org.jlab.coda.emu.support.logger.LoggingEvent: Method getMessage returns the message of this LoggingEvent object.
getMessagesPerThread() - Method in class org.jlab.coda.emu.support.messaging.GenericCallback: Method getMessagesPerThread returns the messagesPerThread of this transitionHandler object.
getModule() - Method in interface org.jlab.coda.emu.support.transport.DataChannel: Get the module which created this channel.
getModule() - Method in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Get the module which created this channel.
getModules() - Method in class org.jlab.coda.emu.EmuDataPath: Get the linked list of the Modules in this path.
getMyId() - Method in class org.jlab.coda.emu.support.data.ByteBufferItem: Get the unique id of this object.
getMyObject() - Method in class org.jlab.coda.emu.support.data.ByteBufferItem: Get the auxiliary object.
getName(int) - Static method in enum org.jlab.coda.emu.support.data.CODATag: Obtain the name from the value.
getName(int) - Static method in enum org.jlab.coda.emu.support.data.ControlType: Obtain the name from the value.
getName(int) - Static method in enum org.jlab.coda.emu.support.data.EventType: Obtain the name from the value.
getNextOutputRingItem(int) - Method in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Gets the next ring buffer item placed there by the last module.
getNextSequence(int) - Method in class org.jlab.coda.emu.support.transport.DataChannelAdapter
getNode(Document, String) - Static method in class org.jlab.coda.emu.support.configurer.Configurer: Method to get the Node object associated with a specific path into an XML document.
getNode() - Method in class org.jlab.coda.emu.support.configurer.DataNode: Get the Node object associated with this DataNode object.
getNode() - Method in interface org.jlab.coda.emu.support.data.RingItem: Get the EvioNode object which selects a particular event in the ByteBuffer referenced by this ring item, if any.
getNode() - Method in class org.jlab.coda.emu.support.data.RingItemAdapter: Get the EvioNode object which selects a particular event in the ByteBuffer referenced by this ring item, if any.
getObjectType - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as type in message for get-object-type command.
getObjectTypeResponse - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as type in message for response to get-object-type command.
getOpenConfig() - Method in class org.jlab.coda.emu.support.transport.DataTransportImplEt: Gets the configuration for opening the ET system.
getOrdinalValue() - Method in enum org.jlab.coda.emu.support.data.ControlType: Get the ordinal value of this enum.
getOutChannels() - Method in class org.jlab.coda.emu.Emu: Get list of output channels.
getOutputChannels() - Method in interface org.jlab.coda.emu.EmuModule: Get the output channels of this EmuModule object.
getOutputChannels() - Method in class org.jlab.coda.emu.modules.ModuleAdapter: Get the output channels of this EmuModule object.
getOutputLevel() - Method in interface org.jlab.coda.emu.support.transport.DataChannel: Get the relative fill level (0-100) of all the rings of this output channel.
getOutputLevel() - Method in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Get the relative fill level (0-100) of all the rings of this output channel.
getOutputLevels() - Method in interface org.jlab.coda.emu.EmuModule: Get array containing the relative fill level (0-100) of each output channel's ring(s).
getOutputLevels() - Method in class org.jlab.coda.emu.modules.ModuleAdapter: Get array containing the relative fill level (0-100) of each output channel's ring(s).
getOutputNames() - Method in interface org.jlab.coda.emu.EmuModule: Get the names of the output channels of this EmuModule object.
getOutputNames() - Method in class org.jlab.coda.emu.modules.ModuleAdapter: Get the names of the output channels of this EmuModule object.
getOutputOrder() - Method in interface org.jlab.coda.emu.EmuModule: Get the byte order of the module's output.
getOutputOrder() - Method in class org.jlab.coda.emu.modules.ModuleAdapter: Get the byte order of the module's output.
getOutputRingCount() - Method in interface org.jlab.coda.emu.support.transport.DataChannel: Get the total number of data-holding output ring buffers.
getOutputRingCount() - Method in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Get the total number of data-holding output ring buffers.
getOutSequence - Variable in class org.jlab.coda.emu.test.VardanERSAP.CrateAggregatingConsumer: Current spot in output ring from which an item was claimed.
getOutSequence - Variable in class org.jlab.coda.emu.test.VardanERSAP.OutputRingConsumer: Current spot in output ring from which an item was claimed.
getPayloadName() - Method in enum org.jlab.coda.emu.support.codaComponent.CODACommand
getPlatformHost() - Method in class org.jlab.coda.emu.support.messaging.CMSGPortal: Get the IP address the platform is running on.
getPlatformIpAddresses() - Method in class org.jlab.coda.emu.Emu: Get the rc platform's IP addresses as dot-decimal strings.
getPlatformPort() - Method in class org.jlab.coda.emu.support.messaging.CMSGPortal: Get the TCP port the platform's cMsg domain server is listening on.
getPlatformTcpPort() - Method in class org.jlab.coda.emu.Emu: Get the platform's cMsg domain server's TCP port.
getPrescale() - Method in interface org.jlab.coda.emu.support.transport.DataChannel: Get the prescale value associated with this channel.
getPrescale() - Method in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Get the prescale value associated with this channel.
getPrestartCallback() - Method in class org.jlab.coda.emu.modules.ModuleAdapter: This method gets the callback object previously registered by the caller used to notify upon the arrival of a PRESTART event.
getPrestartCallback() - Method in interface org.jlab.coda.emu.support.codaComponent.CODAStateMachine: This method gets the callback object previously registered by the caller used to notify upon the arrival of a PRESTART event.
getPrestartCallback() - Method in class org.jlab.coda.emu.support.codaComponent.CODAStateMachineAdapter: This method gets the callback object previously registered by the caller used to notify upon the arrival of a PRESTART event.
getPrestartCallback() - Method in class org.jlab.coda.emu.support.transport.DataChannelAdapter: This method gets the callback object previously registered by the caller used to notify upon the arrival of a PRESTART event.
getPriority() - Method in enum org.jlab.coda.emu.support.codaComponent.CODAClass: Get the default priority associated with this CODA class.
getProducerSequence() - Method in class org.jlab.coda.emu.support.data.ByteBufferItem: Get the sequence of this item for producer.
getRcServer() - Method in class org.jlab.coda.emu.support.messaging.CMSGPortal: Get the connection object to the rc multicast server of runcontrol platform.
getRcUDL() - Method in class org.jlab.coda.emu.support.messaging.CMSGPortal: Get the UDL used to make the connection to the rc server.
getRecordId() - Method in interface org.jlab.coda.emu.support.data.RingItem: The recordId, for a physics or ROC Raw type, starts at zero and increases by one in each successive "evio-file-format" data buffer.
getRecordId() - Method in class org.jlab.coda.emu.support.data.RingItemAdapter: The recordId, for a physics or ROC Raw type, starts at zero and increases by one in each successive "evio-file-format" data buffer.
getRecordId() - Method in interface org.jlab.coda.emu.support.transport.DataChannel: Get the record ID number of the latest event through this channel.
getRecordId() - Method in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Get the record ID number of the latest event through this channel.
getRingBufferIn() - Method in interface org.jlab.coda.emu.support.transport.DataChannel: Get the one and only input ring buffer of this data channel.
getRingBufferIn() - Method in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Get the one and only input ring buffer of this data channel.
getRingBuffersOut() - Method in interface org.jlab.coda.emu.support.transport.DataChannel: Get the array of output ring buffers.
getRingBuffersOut() - Method in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Get the array of output ring buffers.
getRocBufferLevelResponse - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as type in message for response to get-roc-buffer-level command.
getRunNumber() - Method in class org.jlab.coda.emu.Emu: Get the run number of this CODA component.
getRunNumber() - Method in interface org.jlab.coda.emu.support.codaComponent.CODAComponent: Get the run number of this CODA component.
getRunNumber - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as type in message for the get-run-number command.
getRunNumberResponse - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as type in message for response to get-run-number command.
getRunType() - Method in class org.jlab.coda.emu.Emu: Get the runType of this CODA component.
getRunType() - Method in interface org.jlab.coda.emu.support.codaComponent.CODAComponent: Get the runType of this CODA component.
getRunType - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as type in message for the get-run-type command.
getRunTypeId() - Method in class org.jlab.coda.emu.Emu: Get the numeric code representing the run type of this CODA component.
getRunTypeId() - Method in interface org.jlab.coda.emu.support.codaComponent.CODAComponent: Get the numeric code representing the run type of this CODA component.
getRunTypeResponse - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as type in message for response to get-run-type command.
getSequence - Variable in class org.jlab.coda.emu.test.VardanERSAP.CrateProducer: Current spot in ring from which an item was claimed.
getSession() - Method in class org.jlab.coda.emu.Emu: Get the session of this CODA component.
getSession() - Method in interface org.jlab.coda.emu.support.codaComponent.CODAComponent: Get the session of this CODA component.
getSession - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as type in message for the get-session command.
getSessionResponse - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as type in message for response to get-session command.
getSkipSize() - Method in class org.jlab.coda.emu.support.messaging.GenericCallback: Method getSkipSize returns the skipSize of this transitionHandler object.
getSourceId() - Method in interface org.jlab.coda.emu.support.data.RingItem: If emu input channel is reading ROC raw data, then this method gets the CODA id number of the source.
getSourceId() - Method in class org.jlab.coda.emu.support.data.RingItemAdapter: If emu input channel is reading ROC raw data, then this method gets the CODA id number of the source.
getSourceName() - Method in interface org.jlab.coda.emu.support.data.RingItem: Get the name of the data input channel (from xml config file) which read the data into this object.
getSourceName() - Method in class org.jlab.coda.emu.support.data.RingItemAdapter: Get the name of the data input channel (from xml config file) which read the data into this object.
getState - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as type in message for get-state command.
getStateResponse - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as type in message for response to get-state command.
getStatistics() - Method in interface org.jlab.coda.emu.EmuModule: Get the output statistics of this EmuModule object.
getStatistics() - Method in class org.jlab.coda.emu.modules.ModuleAdapter: Get the output statistics of this EmuModule object.
getStatisticsModule() - Method in class org.jlab.coda.emu.Emu: Get the module from which we gather statistics.
getStatus - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as type in message for get-status command.
getStatusResponse - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as type in message for response to get-status command.
getSwitchRing() - Method in interface org.jlab.coda.emu.support.data.RingItem: If merging contents of multiple rings, it's convenient to have a means to tell the caller when to switch reading from one ring to the next.
getSwitchRing() - Method in class org.jlab.coda.emu.support.data.RingItemAdapter: If merging contents of multiple rings, it's convenient to have a means to tell the caller when to switch reading from one ring to the next.
getSystemConfig() - Method in class org.jlab.coda.emu.support.transport.DataTransportImplEt: Get the configuration for creating the ET system.
getTagCodaId(int) - Static method in class org.jlab.coda.emu.support.data.Evio: Get the id which is the lower 12 bits of the CODA-format tag.
getTagField() - Method in class org.jlab.coda.emu.support.configurer.DataNode
getTagStatus(int) - Static method in class org.jlab.coda.emu.support.data.Evio: Get the given CODA-format tag's status which is the upper 4 bits.
getTagStatus(EvioBank) - Static method in class org.jlab.coda.emu.support.data.Evio: Get the given bank's CODA-format tag's status which is the upper 4 bits.
getTagType(int) - Static method in enum org.jlab.coda.emu.support.data.CODATag: Obtain the enum from the value.
getTcpServer() - Method in class org.jlab.coda.emu.support.transport.EmuDomainServer
getTcpServer() - Method in class org.jlab.coda.emu.test.LocalEmuDomainServer
getThreadGroup() - Method in class org.jlab.coda.emu.Emu: Get the ThreadGroup this emu's threads are part of.
getThrowable() - Method in class org.jlab.coda.emu.support.logger.LoggingEvent: Method getThrowable returns the throwable of this LoggingEvent object.
getTime() - Method in class org.jlab.coda.emu.Emu: Get the time from System.currentTimeMillis(), but it's updated only every second or thereabouts.
getTime() - Method in class org.jlab.coda.emu.Emu.StatusReportingThread: Get the time from System.currentTimeMillis(), but it's updated only every 1/4 seconds or thereabouts.
getToolBar() - Method in class org.jlab.coda.emu.support.ui.DebugFrame: Method getToolBar returns the toolBar of this Framework object.
getTotalBytes() - Method in class org.jlab.coda.emu.support.data.PayloadBuffer: Get the length of this structure in bytes, including the header.
getTotalBytes() - Method in interface org.jlab.coda.emu.support.data.RingItem: Get the length of this structure in bytes, including the header.
getTotalBytes() - Method in class org.jlab.coda.emu.support.data.RingItemAdapter: Get the length of this structure in bytes, including the header.
getTransportClass() - Method in interface org.jlab.coda.emu.support.transport.DataTransport: This method gets the name of the transport class implementing this interface.
getTransportClass() - Method in class org.jlab.coda.emu.support.transport.DataTransportAdapter: This method gets the name of the transport class implementing this interface.
getTransportType() - Method in interface org.jlab.coda.emu.support.transport.DataChannel: Get the type of transport this channel implements.
getTransportType() - Method in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Get the type of transport this channel implements.
getTransportType() - Method in class org.jlab.coda.emu.support.transport.DataChannelImplCmsg: Get the type of transport this channel implements.
getTransportType() - Method in class org.jlab.coda.emu.support.transport.DataChannelImplEmu: Get the type of transport this channel implements.
getTransportType() - Method in class org.jlab.coda.emu.support.transport.DataChannelImplEt: Get the type of transport this channel implements.
getTransportType() - Method in class org.jlab.coda.emu.support.transport.DataChannelImplFifo: Get the type of transport this channel implements.
getTransportType() - Method in class org.jlab.coda.emu.support.transport.DataChannelImplFile: Get the type of transport this channel implements.
getUserBoolean() - Method in class org.jlab.coda.emu.support.data.ByteBufferItem: Get the user boolean.
getUserInt() - Method in class org.jlab.coda.emu.support.data.ByteBufferItem: Get the user integer.
getUsers() - Method in class org.jlab.coda.emu.support.data.ByteBufferItem: Get the number of users of this buffer.
getValue(Document, String) - Static method in class org.jlab.coda.emu.support.configurer.Configurer: Method to get the value of the Node object given by the path argument or null if there is no such object.
getValue() - Method in class org.jlab.coda.emu.support.configurer.DataNode
getValue() - Method in enum org.jlab.coda.emu.support.data.CODATag: Get the integer value of this enum.
getValue() - Method in enum org.jlab.coda.emu.support.data.ControlType: Get the integer value of this enum.
getValue() - Method in enum org.jlab.coda.emu.support.data.EventType: Get the integer value of this enum.
getValueField() - Method in class org.jlab.coda.emu.support.configurer.DataNode
getWhatToShow() - Method in class org.jlab.coda.emu.support.configurer.Configurer
go() - Method in class org.jlab.coda.emu.modules.Dummy: This method implements the GO transition of the CODA run control state machine.
go() - Method in class org.jlab.coda.emu.modules.EventRecording: This method implements the GO transition of the CODA run control state machine.
go() - Method in class org.jlab.coda.emu.modules.FarmController: This method implements the GO transition of the CODA run control state machine.
go() - Method in class org.jlab.coda.emu.modules.FastEventBuilder: This method implements the GO transition of the CODA run control state machine.
go() - Method in class org.jlab.coda.emu.modules.ModuleAdapter: This method implements the GO transition of the CODA run control state machine.
go() - Method in class org.jlab.coda.emu.modules.RocFixedRateSimulation: This method implements the GO transition of the CODA run control state machine.
go() - Method in class org.jlab.coda.emu.modules.RocSimulation: This method implements the GO transition of the CODA run control state machine.
go() - Method in class org.jlab.coda.emu.modules.ToFile: This method implements the GO transition of the CODA run control state machine.
go() - Method in class org.jlab.coda.emu.modules.TsFixedRateSimulation: This method implements the GO transition of the CODA run control state machine.
go() - Method in class org.jlab.coda.emu.modules.TsSimulation: This method implements the GO transition of the CODA run control state machine.
go() - Method in interface org.jlab.coda.emu.support.codaComponent.CODAStateMachine: This method implements the GO transition of the CODA run control state machine.
go() - Method in class org.jlab.coda.emu.support.codaComponent.CODAStateMachineAdapter: This method implements the GO transition of the CODA run control state machine.
go - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as type in message for the get-run-type command.
go() - Method in class org.jlab.coda.emu.support.transport.DataChannelImplCmsg: This method implements the GO transition of the CODA run control state machine.
go() - Method in class org.jlab.coda.emu.support.transport.DataChannelImplEmu: This method implements the GO transition of the CODA run control state machine.
go() - Method in class org.jlab.coda.emu.support.transport.DataChannelImplEt: This method implements the GO transition of the CODA run control state machine.
go() - Method in class org.jlab.coda.emu.support.transport.DataChannelImplFifo: This method implements the GO transition of the CODA run control state machine.
go() - Method in class org.jlab.coda.emu.support.transport.DataChannelImplFile: This method implements the GO transition of the CODA run control state machine.
goodChunk_X_EtBufSize - Variable in class org.jlab.coda.emu.modules.ModuleAdapter: For ET output channels, a suggested value of chunk * ET-buffer-size (bytes) which would be a good match for the current size events being built.
gotConsistentControlEvents(PayloadBuffer[], int, int) - Static method in class org.jlab.coda.emu.support.data.Evio: When this is called all channels had control events.
gotEndCmd - Variable in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Got END command from Run Control.
gotoNextRingItem(int) - Method in class org.jlab.coda.emu.support.transport.DataChannelAdapter: It prepares to get the next ring item after DataChannelAdapter.getNextOutputRingItem(int) is called.
gotResetCmd - Variable in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Got RESET command from Run Control.

H

handleError(DOMError) - Method in class org.jlab.coda.emu.support.configurer.Configurer: Method to handle errors.
hasArgs() - Method in class org.jlab.coda.emu.support.control.Command: Does this command have any associated objects (args)?
hasData() - Method in class org.jlab.coda.emu.support.logger.LoggingEvent: Method hasData ...
hasError() - Method in interface org.jlab.coda.emu.support.data.RingItem: Did this object already have an error when first received from transport?
hasError - Variable in class org.jlab.coda.emu.support.data.RingItemAdapter: Has error? from ROC raw data record 4-bit status.
hasError() - Method in class org.jlab.coda.emu.support.data.RingItemAdapter: Did this object already have an error when first received from transport?
hasInputFifo - Variable in class org.jlab.coda.emu.EmuDataPath.Module: Does this module have a fifo input channel?
hasNonFatalBuildingError() - Method in interface org.jlab.coda.emu.support.data.RingItem: Did this object generate a non-fatal error while being built (still allows build to continue) ?
hasNonFatalBuildingError() - Method in class org.jlab.coda.emu.support.data.RingItemAdapter: Did this object generate a non-fatal error while being built (still allows build to continue) ?
hasOutputFifo - Variable in class org.jlab.coda.emu.EmuDataPath.Module: Does this module have a fifo output channel?
hasRocSpecificData() - Method in enum org.jlab.coda.emu.support.data.CODATag: Does this tag indicate the trigger bank has roc-specific data segments present?
hasRocSpecificData(int) - Static method in enum org.jlab.coda.emu.support.data.CODATag: Does this tag indicate the trigger bank has roc-specific data segments present?
hasRunData() - Method in enum org.jlab.coda.emu.support.data.CODATag: Does this tag indicate run number and type are present?
hasRunData(int) - Static method in enum org.jlab.coda.emu.support.data.CODATag: Does this tag indicate run number and type are present?
hasTimestamp() - Method in enum org.jlab.coda.emu.support.data.CODATag: Does this tag indicate a timestamp is present?
hasTimestamp(int) - Static method in enum org.jlab.coda.emu.support.data.CODATag: Does this tag indicate a timestamp is present?
HelpBox - Class in org.jlab.coda.emu.support.ui
HelpBox(Frame) - Constructor for class org.jlab.coda.emu.support.ui.HelpBox
HelpBox(Dialog) - Constructor for class org.jlab.coda.emu.support.ui.HelpBox

I

id - Variable in class org.jlab.coda.emu.modules.ModuleAdapter: ID number of this module obtained from config file.
id - Variable in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Channel id (corresponds to sourceId of ROCs for CODA event building).
ignoreDataErrors - Variable in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Any error reading/parsing data can be ignored if true.
info(String) - Method in class org.jlab.coda.emu.support.logger.Logger: Method info ...
info(String, String) - Method in class org.jlab.coda.emu.support.logger.Logger: Method info ...
INFO - Static variable in class org.jlab.coda.emu.support.logger.LoggingEvent: INFO msg.
InjectFirstEvent - Class in org.jlab.coda.emu.test: This class is an example of a program which injects an evio event into the ER's ET system to be used by the ER as a "first event".
InjectFirstEvent() - Constructor for class org.jlab.coda.emu.test.InjectFirstEvent
input - Variable in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Is this channel an input (true) or output (false) channel?
inputChanLevels - Variable in class org.jlab.coda.emu.modules.ModuleAdapter: Array containing, for each input channel, the percentage (0-100) of filled ring space.
inputChanLevels - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants
inputChanNames - Variable in class org.jlab.coda.emu.modules.ModuleAdapter: Array containing names for each input channel.
inputChanNames - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants
inputChannelCount - Variable in class org.jlab.coda.emu.modules.ModuleAdapter: Number of output channels.
inputChannels - Variable in class org.jlab.coda.emu.modules.ModuleAdapter: ArrayList of DataChannel objects for this module that are inputs.
inputChannelTable - Variable in class org.jlab.coda.emu.support.transport.DataTransportImplEmu
InputDataChannelImplEmu - Class in org.jlab.coda.emu.test: This class is a simplified version of DataChannelImplEmu class.
InputDataChannelImplEmu() - Constructor for class org.jlab.coda.emu.test.InputDataChannelImplEmu: Constructor to create a new DataChannelImplEt instance.
inputFifoName - Variable in class org.jlab.coda.emu.EmuDataPath.Module: Input fifo's name, else null.
inputItems - Variable in class org.jlab.coda.emu.test.VardanERSAP.CrateAggregatingConsumer: Array to store items obtained from both the crate (input) rings.
inputRingItemCount - Variable in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Number of items in input ring buffer.
inputStr(String) - Static method in class org.jlab.coda.emu.EmuUtilities: Method to wait on string from keyboard.
ipAddrList - Variable in class org.jlab.coda.emu.support.transport.DataChannelAdapter: List of destination IP addresses.
isAnyPhysics() - Method in enum org.jlab.coda.emu.support.data.EventType: Is this a any kind of a physics event type?
isBuildable() - Method in enum org.jlab.coda.emu.support.data.EventType: Is this a type buildable by the event builder?
isBuiltTrigger() - Method in enum org.jlab.coda.emu.support.data.CODATag: Is this a built trigger tag? Values can range from 0xff20 to 0xff4f.
isBuiltTrigger(int) - Static method in enum org.jlab.coda.emu.support.data.CODATag: Is this a built trigger tag? Values can range from 0xff20 to 0xff4f.
isBuiltTriggerBank(EvioNode) - Static method in class org.jlab.coda.emu.support.data.Evio: Determine whether a bank is a built trigger bank or not.
isConnected() - Method in interface org.jlab.coda.emu.support.transport.DataTransport: This method tells if this DataTransport object is connected.
isConnected() - Method in class org.jlab.coda.emu.support.transport.DataTransportAdapter: This method tells if this DataTransport object is connected.
isContainer() - Method in class org.jlab.coda.emu.support.configurer.DataNode
isControl(int) - Static method in enum org.jlab.coda.emu.support.data.ControlType: Is this a control tag of any sort?
isControl() - Method in enum org.jlab.coda.emu.support.data.EventType: Is this a control event type?
isControlEvent() - Method in interface org.jlab.coda.emu.support.data.RingItem: Is this object a control event?
isControlEvent() - Method in class org.jlab.coda.emu.support.data.RingItemAdapter: Is this object a control event?
isDebugEnabled() - Method in class org.jlab.coda.emu.support.logger.Logger: Method isDebugEnabled returns the debugEnabled of this Logger object.
isDirect() - Method in class org.jlab.coda.emu.support.data.ByteBufferItem: Is this a direct buffer or not?
isDisentangledPhysics() - Method in enum org.jlab.coda.emu.support.data.EventType: Is this a fully-built, disentangled physics event type?
isEbFriendly() - Method in enum org.jlab.coda.emu.support.data.EventType: Is this a type appropriate for the event builder?
isEnd() - Method in enum org.jlab.coda.emu.support.data.ControlType: Is this an "end" control tag?
isEnd(int) - Static method in enum org.jlab.coda.emu.support.data.ControlType: Is this an "end" control tag?
isER - Variable in class org.jlab.coda.emu.test.blast.EmuBlastee3
isErrorEnabled() - Method in class org.jlab.coda.emu.support.logger.Logger: Method isErrorEnabled returns the errorEnabled of this Logger object.
isEventBuilder() - Method in enum org.jlab.coda.emu.support.codaComponent.CODAClass: Is this class representative of an event building emu?
isEventRecorder() - Method in enum org.jlab.coda.emu.support.codaComponent.CODAClass: Is this class representative of an event recording emu?
isFifo - Variable in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Is this channel an input or output fifo channel? Convenience variable.
isFileWritingOn() - Method in class org.jlab.coda.emu.Emu: Set the flag to tell file output channel to actually write the file or not.
isFinalEventBuilder() - Method in enum org.jlab.coda.emu.support.codaComponent.CODAClass: Is this class representative of a final event building emu (NOT DC)?
isFirst - Variable in class org.jlab.coda.emu.support.data.RingItemAdapter: Is this USER event also a "first event" to be written in each file split?
isFirstEvent() - Method in interface org.jlab.coda.emu.support.data.RingItem: Is this object a first event?
isFirstEvent(boolean) - Method in interface org.jlab.coda.emu.support.data.RingItem: Set whether this object a first event.
isFirstEvent() - Method in class org.jlab.coda.emu.support.data.RingItemAdapter: Is this object a first event?
isFirstEvent(boolean) - Method in class org.jlab.coda.emu.support.data.RingItemAdapter: Set whether this object a first event.
isFromConsumerGet() - Method in class org.jlab.coda.emu.support.data.ByteBufferItem: Was this item obtained through a call to consumerGet()?
isFromDebugGui() - Method in class org.jlab.coda.emu.support.control.Command: Is this command from the debug gui or run control?
isGo() - Method in enum org.jlab.coda.emu.support.data.ControlType: Is this a "go" control tag?
isGo(int) - Static method in enum org.jlab.coda.emu.support.data.ControlType: Is this a "go" control tag?
isHead - Variable in class org.jlab.coda.emu.EmuDataPath.Module: Is this module the head of this data path?
isInput() - Method in interface org.jlab.coda.emu.support.transport.DataChannel: Get whether this channel is an input channel (true), or it is an output channel (false).
isInput() - Method in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Get whether this channel is an input channel (true), or it is an output channel (false).
isPartialPhysics() - Method in enum org.jlab.coda.emu.support.data.EventType: Is this a partially-built physics event type? If so, this event did not yet make it through all the layers of event building.
isPause() - Method in enum org.jlab.coda.emu.support.data.ControlType: Is this a "pause" control tag?
isPause(int) - Static method in enum org.jlab.coda.emu.support.data.ControlType: Is this a "pause" control tag?
isPhysics() - Method in enum org.jlab.coda.emu.support.data.EventType: Is this a fully-built, but entangled physics event type?
isPrestart() - Method in enum org.jlab.coda.emu.support.data.ControlType: Is this a "prestart" control tag?
isPrestart(int) - Static method in enum org.jlab.coda.emu.support.data.ControlType: Is this a "prestart" control tag?
isRawTrigger() - Method in enum org.jlab.coda.emu.support.data.CODATag: Is this a raw trigger tag? Values can range from 0xff10 to 0xff1f.
isRawTrigger(int) - Static method in enum org.jlab.coda.emu.support.data.CODATag: Is this a raw trigger tag? Values can range from 0xff10 to 0xff1f.
isRawTriggerBank(EvioNode) - Static method in class org.jlab.coda.emu.support.data.Evio: Determine whether a bank is a trigger bank from a ROC or not.
isROCRaw() - Method in enum org.jlab.coda.emu.support.data.EventType: Is this a data event type?
isServer() - Method in interface org.jlab.coda.emu.support.transport.DataTransport: This method returns true if this DataTransport object is a server (sends data) or false if it is a client (receives data).
isServer - Variable in class org.jlab.coda.emu.support.transport.DataTransportAdapter: Does this DataTransport object receive data (server = true) or does it send data (server = false)?
isServer() - Method in class org.jlab.coda.emu.support.transport.DataTransportAdapter: This method returns true if this DataTransport object is a server (sends data) or false if it is a client (receives data).
isSync() - Method in enum org.jlab.coda.emu.support.data.ControlType: Is this a sync control tag?
isSync(int) - Static method in enum org.jlab.coda.emu.support.data.ControlType: Is this an "sync" control tag?
isSync() - Method in interface org.jlab.coda.emu.support.data.RingItem: Is this object is a sync event? This condition is set by the ROC and it is only read - never set.
isSync - Variable in class org.jlab.coda.emu.support.data.RingItemAdapter: Is sync bank? from ROC raw data record 4-bit status.
isSync() - Method in class org.jlab.coda.emu.support.data.RingItemAdapter: Is this object is a sync event? This condition is set by the ROC and it is only read - never set.
isSyncEVent(int) - Static method in enum org.jlab.coda.emu.support.data.CODATag: Is this any kind of a sync event tag?
isSyncEVent() - Method in enum org.jlab.coda.emu.support.data.CODATag: Is this any kind of a sync event tag?
isSyncEvent(EvioNode) - Static method in class org.jlab.coda.emu.support.data.Evio: Determine whether a bank is a SYNC control event or not.
isTagBigEndian(int) - Static method in class org.jlab.coda.emu.support.data.Evio: See if the given CODA-format tag indicates data is big endian.
isTagSingleEventMode(int) - Static method in class org.jlab.coda.emu.support.data.Evio: See if the given CODA-format tag indicates the ROC is in single event mode.
isTagSyncEvent(int) - Static method in class org.jlab.coda.emu.support.data.Evio: See if the given CODA-format tag indicates it is a sync event.
isTransition() - Method in enum org.jlab.coda.emu.support.codaComponent.CODACommand
isTrigger(int) - Static method in enum org.jlab.coda.emu.support.data.CODATag: Is this any kind of a trigger tag? Values can range from 0xff10 to 0xff4f.
isTrigger() - Method in enum org.jlab.coda.emu.support.data.CODATag: Is this any kind of a trigger tag? Values can range from 0xff10 to 0xff4f.
isUser() - Method in enum org.jlab.coda.emu.support.data.EventType: Is this a user event type?
isUser() - Method in interface org.jlab.coda.emu.support.data.RingItem: Is this object a USER event type?
isUser - Variable in class org.jlab.coda.emu.support.data.RingItemAdapter: Is this a USER event type?
isUser() - Method in class org.jlab.coda.emu.support.data.RingItemAdapter: Is this object a USER event type?
isUser(boolean) - Method in class org.jlab.coda.emu.support.data.RingItemAdapter
isUserEvent(EvioBank) - Static method in class org.jlab.coda.emu.support.data.Evio: Determine whether a bank is a USER event or not.
isUserEvent(EvioNode) - Static method in class org.jlab.coda.emu.support.data.Evio: Determine whether an event is a USER event or not.
isUserOrControl() - Method in enum org.jlab.coda.emu.support.data.EventType: Is this a usr or control event type?

K

killAllThreads() - Method in class org.jlab.coda.emu.support.transport.EmuDomainTcpServer: Kills this and all spawned threads.
killAllThreads() - Method in class org.jlab.coda.emu.support.transport.EmuDomainUdpListener: Kills this and all spawned threads.
killAllThreads() - Method in class org.jlab.coda.emu.test.LocalEmuDomainTcpServer: Kills this and all spawned threads.
killAllThreads() - Method in class org.jlab.coda.emu.test.LocalEmuDomainUdpListener: Kills this and all spawned threads.

L

liveTime - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants
LocalEmuDomainServer - Class in org.jlab.coda.emu.test: Local copy of EmuDomainServer class.
LocalEmuDomainServer(int, String, String, DataTransportImplEmu) - Constructor for class org.jlab.coda.emu.test.LocalEmuDomainServer
LocalEmuDomainTcpServer - Class in org.jlab.coda.emu.test: Local copy of EmuDomainTcpServer class.
LocalEmuDomainTcpServer(LocalEmuDomainServer, int) - Constructor for class org.jlab.coda.emu.test.LocalEmuDomainTcpServer: Constructor.
LocalEmuDomainUdpListener - Class in org.jlab.coda.emu.test: Local copy of EmuDomainUdpListener class.
LocalEmuDomainUdpListener(LocalEmuDomainServer, int, String, String) - Constructor for class org.jlab.coda.emu.test.LocalEmuDomainUdpListener: Constructor.
localTempPort - Variable in class org.jlab.coda.emu.test.LocalEmuDomainServer: The local port used temporarily while multicasting for other rc multicast servers.
logger - Variable in class org.jlab.coda.emu.modules.ModuleAdapter: Logger used to log messages to debug console.
Logger - Class in org.jlab.coda.emu.support.logger: This class is used as abstraction layer for log messages Minimum Log4j implementation with multiple overloaded functions
Logger() - Constructor for class org.jlab.coda.emu.support.logger.Logger
logger - Variable in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Logger associated with this EMU (convenience member).
logger - Variable in class org.jlab.coda.emu.support.transport.DataTransportAdapter: Logging object associated with the emu that created this transport.
LoggerAppender - Interface in org.jlab.coda.emu.support.logger: Interface LoggerAppender ...
LoggerDataWrapper - Class in org.jlab.coda.emu.support.logger
LoggerDataWrapper(boolean) - Constructor for class org.jlab.coda.emu.support.logger.LoggerDataWrapper: Constructor LoggerDataWrapper creates a new LoggerDataWrapper instance.
LoggerDataWrapper(long) - Constructor for class org.jlab.coda.emu.support.logger.LoggerDataWrapper: Constructor LoggerDataWrapper creates a new LoggerDataWrapper instance.
LoggerDataWrapper(Object) - Constructor for class org.jlab.coda.emu.support.logger.LoggerDataWrapper: Constructor LoggerDataWrapper creates a new LoggerDataWrapper instance.
LoggerDataWrapper(long, long) - Constructor for class org.jlab.coda.emu.support.logger.LoggerDataWrapper: Constructor LoggerDataWrapper creates a new LoggerDataWrapper instance.
LoggerDataWrapper(String, String) - Constructor for class org.jlab.coda.emu.support.logger.LoggerDataWrapper: Constructor LoggerDataWrapper creates a new LoggerDataWrapper instance.
LoggingEvent - Class in org.jlab.coda.emu.support.logger
LoggingEvent(int, String, StackTraceElement, Throwable) - Constructor for class org.jlab.coda.emu.support.logger.LoggingEvent: Constructor LoggingEvent creates a new LoggingEvent instance.
LoggingEvent(int, String, StackTraceElement, Throwable, Object) - Constructor for class org.jlab.coda.emu.support.logger.LoggingEvent: Constructor LoggingEvent creates a new LoggingEvent instance.
logQueueAppender - Variable in class org.jlab.coda.emu.support.ui.log.SwingLogConsoleDialog
LogTextCaret - Class in org.jlab.coda.emu.support.ui.log
LogTextCaret() - Constructor for class org.jlab.coda.emu.support.ui.log.LogTextCaret

M

main(String[]) - Static method in class org.jlab.coda.emu.EmuFactory: Method main, entry point for this program simply creates an object of class Emu.
main(String[]) - Static method in class org.jlab.coda.emu.support.ui.EMUCommander: Run as executable.
main(String[]) - Static method in class org.jlab.coda.emu.test.blast.EmuBlastee: Run as a stand-alone application.
main(String[]) - Static method in class org.jlab.coda.emu.test.blast.EmuBlastee2: Run as a stand-alone application.
main(String[]) - Static method in class org.jlab.coda.emu.test.blast.EmuBlastee3: Run as a stand-alone application.
main(String[]) - Static method in class org.jlab.coda.emu.test.blast.EmuBlaster: Run as a stand-alone application.
main(String[]) - Static method in class org.jlab.coda.emu.test.blast.EmuBlaster2: Run as a stand-alone application.
main(String[]) - Static method in class org.jlab.coda.emu.test.BuildThreadTest: Run as a stand-alone application.
main(String[]) - Static method in class org.jlab.coda.emu.test.ByteBufferSupplyTest: Run as a stand-alone application.
main(String[]) - Static method in class org.jlab.coda.emu.test.EmuDomainReceiver: Run as a stand-alone application.
main(String[]) - Static method in class org.jlab.coda.emu.test.InjectFirstEvent
main(String[]) - Static method in class org.jlab.coda.emu.test.RcProtocolTest: Run as a stand-alone application.
main(String[]) - Static method in class org.jlab.coda.emu.test.ReceiverCmsg: Run as a stand-alone application.
main(String[]) - Static method in class org.jlab.coda.emu.test.ReceiverEt: Run as a stand-alone application.
main(String[]) - Static method in class org.jlab.coda.emu.test.RocSynchronizer: Run as a stand-alone application.
main(String[]) - Static method in class org.jlab.coda.emu.test.SenderCmsg: Run as a stand-alone application.
main(String[]) - Static method in class org.jlab.coda.emu.test.VardanERSAP
makeTriggerBankFromPhysics(PayloadBuffer[], CompactEventBuilder, int, int, int, boolean, boolean, boolean, int) - Static method in class org.jlab.coda.emu.support.data.Evio: Combine the trigger banks of all input payload banks of Physics event format (from previous event builder) into a single trigger bank which will be used in the final built event.
makeTriggerBankFromPhysics(PayloadBuffer[], EvioNode[], EvioNode[], ByteBuffer[], ByteBuffer, int, int, int, boolean, boolean, boolean, boolean, int, int[], long[], long[], long[], long[], long[], short[], short[]) - Static method in class org.jlab.coda.emu.support.data.Evio: Combine the trigger banks of all input payload banks of Physics event format (from previous event builder) into a single trigger bank which will be used in the final built event.
makeTriggerBankFromPhysicsOrig(PayloadBuffer[], CompactEventBuilder, int, int, int, boolean, boolean, boolean, int) - Static method in class org.jlab.coda.emu.support.data.Evio: Combine the trigger banks of all input payload banks of Physics event format (from previous event builder) into a single trigger bank which will be used in the final built event.
makeTriggerBankFromRocRaw(PayloadBuffer[], ByteBuffer, int, long, int, int, boolean, boolean, boolean, int, int, long[], short[], int[], int[], int[], ByteBuffer[], EvioNode[], boolean) - Static method in class org.jlab.coda.emu.support.data.Evio: Combine the trigger banks of all input payload banks of ROC raw format into a single trigger bank which will be used in the final built event.
makeTriggerBankFromRocRaw(PayloadBuffer[], CompactEventBuilder, int, long, int, int, boolean, boolean, boolean, int, int) - Static method in class org.jlab.coda.emu.support.data.Evio: Combine the trigger banks of all input payload banks of ROC raw format into a single trigger bank which will be used in the final built event.
makeTriggerBankFromRocRaw(PayloadBuffer[], CompactEventBuilder, int, long, int, int, boolean, boolean, boolean, int, int, long[], short[], int[], int[]) - Static method in class org.jlab.coda.emu.support.data.Evio: Combine the trigger banks of all input payload banks of ROC raw format into a single trigger bank which will be used in the final built event.
makeTriggerBankFromRocRawOld(PayloadBuffer[], CompactEventBuilder, int, long, int, int, boolean, boolean, boolean, int, int) - Static method in class org.jlab.coda.emu.support.data.Evio: Combine the trigger banks of all input payload banks of ROC raw format into a single trigger bank which will be used in the final built event.
makeTriggerBankFromRocRawOrig(PayloadBuffer[], CompactEventBuilder, int, long, int, int, boolean, boolean, boolean, int, int) - Static method in class org.jlab.coda.emu.support.data.Evio: Combine the trigger banks of all input payload banks of ROC raw format into a single trigger bank which will be used in the final built event.
matchesId() - Method in interface org.jlab.coda.emu.support.data.RingItem: Does the source id match that of the input channel?
matchesId(boolean) - Method in interface org.jlab.coda.emu.support.data.RingItem: Set whether the source id matches that of the input channel.
matchesId - Variable in class org.jlab.coda.emu.support.data.RingItemAdapter: Does sourceId match id of input channel?
matchesId() - Method in class org.jlab.coda.emu.support.data.RingItemAdapter: Does the source id match that of the input channel?
matchesId(boolean) - Method in class org.jlab.coda.emu.support.data.RingItemAdapter: Set whether the source id matches that of the input channel.
maxEventSize - Variable in class org.jlab.coda.emu.modules.ModuleAdapter: Maximum-sized built event in bytes.
maxEventSize - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants
maySkipMessages() - Method in class org.jlab.coda.emu.support.messaging.GenericCallback: Method maySkipMessages ...
MDIDesktopManager - Class in org.jlab.coda.emu.support.ui: Private class used to replace the standard DesktopManager for JDesktopPane.
MDIDesktopManager(MDIDesktopPane) - Constructor for class org.jlab.coda.emu.support.ui.MDIDesktopManager
MDIDesktopPane - Class in org.jlab.coda.emu.support.ui: An extension of JDesktopPane that supports often used MDI functionality.
MDIDesktopPane() - Constructor for class org.jlab.coda.emu.support.ui.MDIDesktopPane
minEventSize - Variable in class org.jlab.coda.emu.modules.ModuleAdapter: Minimum-sized built event in bytes.
minEventSize - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants
Module() - Constructor for class org.jlab.coda.emu.EmuDataPath.Module
module - Variable in class org.jlab.coda.emu.EmuDataPath.Module: EmuModule object (the actual module itself).
module - Variable in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Module to which this channel belongs.
ModuleAdapter - Class in org.jlab.coda.emu.modules: This class contains boilerplate code for implementing a module.
ModuleAdapter(String, Emu) - Constructor for class org.jlab.coda.emu.modules.ModuleAdapter: Default constructor for fake TS.
ModuleAdapter(String, Map<String, String>, Emu) - Constructor for class org.jlab.coda.emu.modules.ModuleAdapter: Constructor creates a new EventRecording instance.
ModuleAdapter.RateCalculatorThread - Class in org.jlab.coda.emu.modules: This class defines a thread that makes instantaneous rate calculations once every few seconds.
moduleName - Variable in class org.jlab.coda.emu.EmuDataPath.Module: Name of this module.
moduleState - Variable in class org.jlab.coda.emu.modules.ModuleAdapter: State of this module.
monitor - Variable in class org.jlab.coda.emu.support.ui.EMUCommander
monitor(QueueAppender) - Method in class org.jlab.coda.emu.support.ui.log.SwingLogConsoleDialog
MonitorRunnable() - Constructor for class org.jlab.coda.emu.support.ui.log.SwingLogConsoleDialog.MonitorRunnable
monitorThread - Variable in class org.jlab.coda.emu.support.ui.log.SwingLogConsoleDialog
multicastResponse - Variable in class org.jlab.coda.emu.test.LocalEmuDomainServer: Signal to coordinate the multicasting and waiting for responses.
mustSerializeMessages() - Method in class org.jlab.coda.emu.support.messaging.GenericCallback: Method mustSerializeMessages ...
MvalReportingHandler - Class in org.jlab.coda.emu.support.messaging: This class receives messages from the ET input channels containing the number of evio events in each ET event (or M).
MvalReportingHandler(CMSGPortal) - Constructor for class org.jlab.coda.emu.support.messaging.MvalReportingHandler: Constructor.
myCallback() - Constructor for class org.jlab.coda.emu.test.ReceiverCmsg.myCallback
myCallback() - Constructor for class org.jlab.coda.emu.test.RocSynchronizer.myCallback
myIndex - Variable in class org.jlab.coda.emu.support.data.ByteBufferItem: Auxiliary integer storage.

N

name() - Method in class org.jlab.coda.emu.Emu: Get the name of this CODA component.
name() - Method in interface org.jlab.coda.emu.EmuModule: Get the name of the module
name - Variable in class org.jlab.coda.emu.modules.ModuleAdapter: Name of this module.
name() - Method in class org.jlab.coda.emu.modules.ModuleAdapter: Get the name of the module
name() - Method in interface org.jlab.coda.emu.support.codaComponent.CODAComponent: Get the name of this CODA component.
name() - Method in interface org.jlab.coda.emu.support.codaComponent.CODAStateIF: Get the state name.
name() - Method in class org.jlab.coda.emu.support.control.Command: Get the name of the Run Control command.
name - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants
name() - Method in interface org.jlab.coda.emu.support.transport.DataChannel: Get the name of this data channel.
name - Variable in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Channel name
name() - Method in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Get the name of this data channel.
name() - Method in interface org.jlab.coda.emu.support.transport.DataTransport: This method gets the name of this DataTransport object.
name - Variable in class org.jlab.coda.emu.support.transport.DataTransportAdapter: Name of this DataTransport object.
name() - Method in class org.jlab.coda.emu.support.transport.DataTransportAdapter: This method gets the name of this DataTransport object.
nanoSecPerBuf - Variable in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Number of milliseconds between each buffer being sent.
newContainer(Document, String, String) - Static method in class org.jlab.coda.emu.support.configurer.Configurer: Method to add a new container DataNode object to the Node object given by the path argument.
newInstance() - Method in class org.jlab.coda.emu.support.data.RingItemFactory
newInstance() - Method in class org.jlab.coda.emu.test.VardanERSAP.ByteBufferFactory
newValue(Document, String, String, String) - Static method in class org.jlab.coda.emu.support.configurer.Configurer: Method to add an attribute (name/value pair) DataNode object to or replace one with the same name associated with the Node object given by the path argument.
nextEvent - Variable in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Number of the module's buildable event produced which this channel will output next (starting at 0).
nextReleaseIndex - Variable in class org.jlab.coda.emu.test.BuildThreadTest.BuildThread
nextReleaseIndex - Variable in class org.jlab.coda.emu.test.BuildThreadTest.BuildThreadVol
nextSequences - Variable in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Index of next ring item.
node - Variable in class org.jlab.coda.emu.support.data.RingItemAdapter: Object containing info about specific evio event in the buffer.
nonFatalBuildingError - Variable in class org.jlab.coda.emu.support.data.RingItemAdapter: Was there an non-fatal error generated while trying to build an event?
numberOfLongs - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants

O

objectType - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants
org.jlab.coda.emu - package org.jlab.coda.emu
org.jlab.coda.emu.modules - package org.jlab.coda.emu.modules
org.jlab.coda.emu.support.codaComponent - package org.jlab.coda.emu.support.codaComponent
org.jlab.coda.emu.support.configurer - package org.jlab.coda.emu.support.configurer
org.jlab.coda.emu.support.control - package org.jlab.coda.emu.support.control
org.jlab.coda.emu.support.data - package org.jlab.coda.emu.support.data
org.jlab.coda.emu.support.logger - package org.jlab.coda.emu.support.logger
org.jlab.coda.emu.support.messaging - package org.jlab.coda.emu.support.messaging
org.jlab.coda.emu.support.transport - package org.jlab.coda.emu.support.transport
org.jlab.coda.emu.support.ui - package org.jlab.coda.emu.support.ui
org.jlab.coda.emu.support.ui.log - package org.jlab.coda.emu.support.ui.log
org.jlab.coda.emu.test - package org.jlab.coda.emu.test
org.jlab.coda.emu.test.blast - package org.jlab.coda.emu.test.blast
outputAvailableSequence - Variable in class org.jlab.coda.emu.test.VardanERSAP: Track which sequence is currently available from the output ring.
outputBarrier - Variable in class org.jlab.coda.emu.test.VardanERSAP: 1 barrier for output ring's consumer
outputChanLevels - Variable in class org.jlab.coda.emu.modules.ModuleAdapter: Array containing, for each output channel, the percentage (0-100) of filled ring space.
outputChanLevels - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants
outputChanNames - Variable in class org.jlab.coda.emu.modules.ModuleAdapter: Array containing names for each output channel.
outputChanNames - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants
outputChannelCount - Variable in class org.jlab.coda.emu.modules.ModuleAdapter: Number of output channels.
outputChannelCount - Variable in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Total number of module's output channels.
outputChannelFill - Variable in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Number of entries (filled slots) in each ring buffer of this output channel.
outputChannels - Variable in class org.jlab.coda.emu.modules.ModuleAdapter: ArrayList of DataChannel objects that are outputs.
outputFifoName - Variable in class org.jlab.coda.emu.EmuDataPath.Module: Output fifo's name, else null.
outputIndex - Variable in class org.jlab.coda.emu.support.transport.DataChannelAdapter: This output channel's order in relation to the other output channels for module, starting at 0.
outputItems - Variable in class org.jlab.coda.emu.test.VardanERSAP.CrateAggregatingConsumer: Array to store items obtained from both the output ring.
outputModuleInternalRingCount - Variable in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Number of items in output channel's internal ByteBuffer supplies.
outputNextSequence - Variable in class org.jlab.coda.emu.test.VardanERSAP: Track which sequence the output consumer wants next from output ring.
outputOrder - Variable in class org.jlab.coda.emu.modules.ModuleAdapter: Do we produce big or little endian output in ByteBuffers?
outputRingBuffer - Variable in class org.jlab.coda.emu.test.VardanERSAP: 1 output RingBuffer.
OutputRingConsumer() - Constructor for class org.jlab.coda.emu.test.VardanERSAP.OutputRingConsumer
outputRingCount - Variable in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Total number of module's event-building threads and therefore output ring buffers.
outputRingItemCount - Variable in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Number of items in output ring buffers.
outputSequence - Variable in class org.jlab.coda.emu.test.VardanERSAP: 1 sequence for the output ring's consumer

P

parameters() - Method in class org.jlab.coda.emu.Emu: Get the configuration of this CODA component in the form of a parsed XML document object that is loaded when the configure command is executed.
parameters() - Method in interface org.jlab.coda.emu.support.codaComponent.CODAComponent: Get the configuration of this CODA component in the form of a parsed XML document object that is loaded when the configure command is executed.
parseFile(String) - Static method in class org.jlab.coda.emu.support.configurer.Configurer: Method to parse a file containing an XML configuration.
parser - Variable in class org.jlab.coda.emu.test.ReceiverCmsg
parseString(String) - Static method in class org.jlab.coda.emu.support.configurer.Configurer: Method to parse a string containing an XML configuration.
pause() - Method in class org.jlab.coda.emu.modules.Dummy: This method implements the PAUSE transition of the CODA run control state machine.
pause() - Method in class org.jlab.coda.emu.modules.FarmController: This method implements the PAUSE transition of the CODA run control state machine.
pause() - Method in class org.jlab.coda.emu.modules.ModuleAdapter: This method implements the PAUSE transition of the CODA run control state machine.
pause() - Method in interface org.jlab.coda.emu.support.codaComponent.CODAStateMachine: This method implements the PAUSE transition of the CODA run control state machine.
pause() - Method in class org.jlab.coda.emu.support.codaComponent.CODAStateMachineAdapter: This method implements the PAUSE transition of the CODA run control state machine.
pause - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as type in message for the set-run-type command.
pause - Variable in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Do we pause the dataThread?
pause() - Method in class org.jlab.coda.emu.support.transport.DataChannelImplCmsg: This method implements the PAUSE transition of the CODA run control state machine.
pause() - Method in class org.jlab.coda.emu.support.transport.DataChannelImplEmu: This method implements the PAUSE transition of the CODA run control state machine.
pause() - Method in class org.jlab.coda.emu.support.transport.DataChannelImplEt: This method implements the PAUSE transition of the CODA run control state machine.
pause() - Method in class org.jlab.coda.emu.support.transport.DataChannelImplFifo: This method implements the PAUSE transition of the CODA run control state machine.
pause() - Method in class org.jlab.coda.emu.support.transport.DataChannelImplFile: This method implements the PAUSE transition of the CODA run control state machine.
pause() - Method in class org.jlab.coda.emu.support.transport.DataTransportImplCmsg: This method implements the PAUSE transition of the CODA run control state machine.
paused - Variable in class org.jlab.coda.emu.modules.ModuleAdapter: User hit PAUSE button if true.
PayloadBuffer - Class in org.jlab.coda.emu.support.data: Wrapper for a ByteBuffer object that has external, associated data.
PayloadBuffer() - Constructor for class org.jlab.coda.emu.support.data.PayloadBuffer: Zero-arg constructor.
PayloadBuffer(ByteBuffer) - Constructor for class org.jlab.coda.emu.support.data.PayloadBuffer: Constructor that sets attachment to null.
PayloadBuffer(ByteBuffer, Object, EvioNode) - Constructor for class org.jlab.coda.emu.support.data.PayloadBuffer: Constructor.
PayloadBuffer(ByteBuffer, EventType, ControlType, int, int, String, EvioNode) - Constructor for class org.jlab.coda.emu.support.data.PayloadBuffer: Constructor that sets attachment to null.
PayloadBuffer(PayloadBuffer) - Constructor for class org.jlab.coda.emu.support.data.PayloadBuffer: Copy constructor.
pCounter1 - Variable in class org.jlab.coda.emu.test.blast.EmuBlaster2
pCounter2 - Variable in class org.jlab.coda.emu.test.blast.EmuBlaster2
poll() - Method in class org.jlab.coda.emu.support.logger.QueueAppender: Return a LoggingEvent object from the internal storage queue.
poll(int) - Method in class org.jlab.coda.emu.support.logger.QueueAppender: Return a LoggingEvent object from the internal storage queue.
postCommand(Command) - Method in class org.jlab.coda.emu.Emu: This method puts a command object into a mailbox of a CODA component that is periodically checked by that component.
postCommand(Command) - Method in interface org.jlab.coda.emu.support.control.CommandAcceptor: This method puts a command object into a mailbox of a CODA component that is periodically checked by that component.
postCommand(Command) - Method in class org.jlab.coda.emu.support.ui.EMUCommander.CommandHandler
powerOfTwo(int, boolean) - Static method in class org.jlab.coda.emu.EmuUtilities: Return the power of 2 closest to the given argument.
prescale - Variable in class org.jlab.coda.emu.support.transport.DataChannelAdapter: For ET output channel of ER, select a prescaled number of events to be sent.
prestart() - Method in class org.jlab.coda.emu.modules.Dummy: This method implements the PRESTART transition of the CODA run control state machine.
prestart() - Method in class org.jlab.coda.emu.modules.EventRecording: This method implements the PRESTART transition of the CODA run control state machine.
prestart() - Method in class org.jlab.coda.emu.modules.FarmController: This method implements the PRESTART transition of the CODA run control state machine.
prestart() - Method in class org.jlab.coda.emu.modules.FastEventBuilder: This method implements the PRESTART transition of the CODA run control state machine.
prestart() - Method in class org.jlab.coda.emu.modules.ModuleAdapter: This method implements the PRESTART transition of the CODA run control state machine.
prestart() - Method in class org.jlab.coda.emu.modules.RocFixedRateSimulation: This method implements the PRESTART transition of the CODA run control state machine.
prestart() - Method in class org.jlab.coda.emu.modules.RocSimulation: This method implements the PRESTART transition of the CODA run control state machine.
prestart() - Method in class org.jlab.coda.emu.modules.ToFile: This method implements the PRESTART transition of the CODA run control state machine.
prestart() - Method in class org.jlab.coda.emu.modules.TsFixedRateSimulation: This method implements the PRESTART transition of the CODA run control state machine.
prestart() - Method in class org.jlab.coda.emu.modules.TsSimulation: This method implements the PRESTART transition of the CODA run control state machine.
prestart() - Method in interface org.jlab.coda.emu.support.codaComponent.CODAStateMachine: This method implements the PRESTART transition of the CODA run control state machine.
prestart() - Method in class org.jlab.coda.emu.support.codaComponent.CODAStateMachineAdapter: This method implements the PRESTART transition of the CODA run control state machine.
prestart - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as type in message for the set-run-number command.
prestart() - Method in class org.jlab.coda.emu.support.transport.DataChannelAdapter: This method implements the PRESTART transition of the CODA run control state machine.
prestart() - Method in class org.jlab.coda.emu.support.transport.DataChannelImplEmu: This method implements the PRESTART transition of the CODA run control state machine.
prestart() - Method in class org.jlab.coda.emu.support.transport.DataChannelImplEt: This method implements the PRESTART transition of the CODA run control state machine.
prestart() - Method in class org.jlab.coda.emu.support.transport.DataTransportImplCmsg: This method implements the PRESTART transition of the CODA run control state machine.
prestartCallback - Variable in class org.jlab.coda.emu.modules.ModuleAdapter: Object used by Emu to be notified of PRESTART event arrival.
prestartCallback - Variable in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Object used by Emu to be notified of PRESTART event arrival.
prestartPayloadRunType - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as payload name for item holding run type int.
previousState() - Method in class org.jlab.coda.emu.Emu: This method returns the previous state of the modules in this Emu.
PrintAppender - Class in org.jlab.coda.emu.support.logger
PrintAppender(PrintWriter) - Constructor for class org.jlab.coda.emu.support.logger.PrintAppender: Constructor PrintAppender creates a new PrintAppender instance.
printBuildTimeHistogram(String, String) - Method in class org.jlab.coda.emu.support.data.Statistics: Print out a histogram of data points.
printStackTrace() - Static method in class org.jlab.coda.emu.EmuUtilities: This method prints out the current stack trace.
publish(ByteBufferItem) - Method in class org.jlab.coda.emu.support.data.ByteBufferSupply: Used to tell that the consumer that the ring buffer item is ready for consumption.
publish() - Method in class org.jlab.coda.emu.test.VardanERSAP.CrateProducer: Used to tell the consumer that the ring buffer item gotten with this producer's last call to VardanERSAP.CrateProducer.get() (and all previously gotten items) is ready for consumption.
put() - Method in class org.jlab.coda.emu.test.VardanERSAP.CrateAggregatingConsumer: This "consumer" is also a producer for the output ring.
put() - Method in class org.jlab.coda.emu.test.VardanERSAP.OutputRingConsumer: This "consumer" is also a producer for the output ring.

Q

QueueAppender - Class in org.jlab.coda.emu.support.logger: Class QueueAppender which keeps a queue of logging events appended.
QueueAppender(int) - Constructor for class org.jlab.coda.emu.support.logger.QueueAppender: Constructor QueueAppender creates a new QueueAppender instance.
quit() - Method in class org.jlab.coda.emu.Emu: Exit this Emu (there still may be other threads running in the JVM).

R

RateCalculator - Variable in class org.jlab.coda.emu.modules.ModuleAdapter: Thread to calculate event and data rates.
RateCalculatorThread() - Constructor for class org.jlab.coda.emu.modules.ModuleAdapter.RateCalculatorThread
RC_GUI_CONSOLE - Static variable in class org.jlab.coda.emu.support.logger.LoggingEvent: RC GUI CONSOLE msg, 15.
RcCommandHandler - Class in org.jlab.coda.emu.support.messaging: Class RcCommandHandler
RcCommandHandler(CMSGPortal) - Constructor for class org.jlab.coda.emu.support.messaging.RcCommandHandler: Constructor RcCommandHandler creates a new RcCommandHandler instance.
rcConsole(String, String) - Method in class org.jlab.coda.emu.support.logger.Logger: Method rc gui console ...
RCConstants - Class in org.jlab.coda.emu.support.messaging: This class holds cMsg message types that are used for both subscriptions and messages.
RCConstants() - Constructor for class org.jlab.coda.emu.support.messaging.RCConstants
rcGuiErrorMessage(String) - Method in class org.jlab.coda.emu.support.messaging.CMSGPortal: Send an error message that ends up on the run control gui.
rcGuiInfoMessage(String) - Method in class org.jlab.coda.emu.support.messaging.CMSGPortal: Send an informational message that ends up on the run control gui.
rcGuiSevereMessage(String) - Method in class org.jlab.coda.emu.support.messaging.CMSGPortal: Send an error message that ends up on the run control gui.
rcGuiWarningMessage(String) - Method in class org.jlab.coda.emu.support.messaging.CMSGPortal: Send a warning message that ends up on the run control gui.
RcProtocolTest - Class in org.jlab.coda.emu.test: This class is designed to find bugs in the network communication/protocol when talking to rc server (agent).
RcProtocolTest(String[]) - Constructor for class org.jlab.coda.emu.test.RcProtocolTest: Constructor.
rcResponseCommandType - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as type in subscription that receives rc response commands.
receiveDataThread() - Constructor for class org.jlab.coda.emu.test.ReceiverEt.receiveDataThread
ReceiveMsgCallback() - Constructor for class org.jlab.coda.emu.support.transport.DataChannelImplCmsg.ReceiveMsgCallback
ReceiverCmsg - Class in org.jlab.coda.emu.test: This class is designed to receive output from an EMU.
ReceiverCmsg(String[]) - Constructor for class org.jlab.coda.emu.test.ReceiverCmsg: Constructor.
ReceiverCmsg.myCallback - Class in org.jlab.coda.emu.test: This class defines the callback to be run when a message matching our subscription arrives.
ReceiverEt - Class in org.jlab.coda.emu.test: Created by IntelliJ IDEA.
ReceiverEt(String[]) - Constructor for class org.jlab.coda.emu.test.ReceiverEt: Constructor.
ReceiverEt.receiveDataThread - Class in org.jlab.coda.emu.test
recordId - Variable in class org.jlab.coda.emu.support.data.RingItemAdapter: If the event type is RocRaw or Physics, this is the record id of this CODA events.
recordId - Variable in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Record id (corresponds to evio events flowing through data channel).
registerEndCallback(EmuEventNotify) - Method in class org.jlab.coda.emu.modules.ModuleAdapter: This method allows for setting a object used to notify the caller when an END event has arrived (or any other occurrence for that matter).
registerEndCallback(EmuEventNotify) - Method in interface org.jlab.coda.emu.support.codaComponent.CODAStateMachine: This method allows for setting a object used to notify the caller when an END event has arrived (or any other occurrence for that matter).
registerEndCallback(EmuEventNotify) - Method in class org.jlab.coda.emu.support.codaComponent.CODAStateMachineAdapter: This method allows for setting a object used to notify the caller when an END event has arrived (or any other occurrence for that matter).
registerEndCallback(EmuEventNotify) - Method in class org.jlab.coda.emu.support.transport.DataChannelAdapter: This method allows for setting a object used to notify the caller when an END event has arrived (or any other occurrence for that matter).
registerPrestartCallback(EmuEventNotify) - Method in class org.jlab.coda.emu.modules.ModuleAdapter: This method allows for setting a object used to notify the caller when a PRESTART event has arrived (or any other occurrence for that matter).
registerPrestartCallback(EmuEventNotify) - Method in interface org.jlab.coda.emu.support.codaComponent.CODAStateMachine: This method allows for setting a object used to notify the caller when a PRESTART event has arrived (or any other occurrence for that matter).
registerPrestartCallback(EmuEventNotify) - Method in class org.jlab.coda.emu.support.codaComponent.CODAStateMachineAdapter: This method allows for setting a object used to notify the caller when a PRESTART event has arrived (or any other occurrence for that matter).
registerPrestartCallback(EmuEventNotify) - Method in class org.jlab.coda.emu.support.transport.DataChannelAdapter: This method allows for setting a object used to notify the caller when a PRESTART event has arrived (or any other occurrence for that matter).
regulateBufferRate - Variable in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Use both bufsPerSec and eventsPerBuffer to regulate the data flow out of this channel.
regulateOutputBufferRate(int, double) - Method in interface org.jlab.coda.emu.support.transport.DataChannel: Turn on regulation of the flow of data through an output channel.
regulateOutputBufferRate(int, double) - Method in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Turn on regulation of the flow of data through an output channel.
release(ByteBufferItem) - Method in class org.jlab.coda.emu.support.data.ByteBufferSupply: Consumer releases claim on the given ring buffer item so it becomes available for reuse.
releaseByteBuffer() - Method in interface org.jlab.coda.emu.support.data.RingItem: Releases a ByteBuffer (if any) referenced by this object which was obtained from a ByteBufferSupply object.
releaseByteBuffer() - Method in class org.jlab.coda.emu.support.data.RingItemAdapter: Releases a ByteBuffer (if any) referenced by this object which was obtained from a ByteBufferSupply object.
releaseCurrentAndGoToNextOutputRingItem(int) - Method in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Releases the item obtained by calling DataChannelAdapter.getNextOutputRingItem(int), so that it may be reused for writing into by the last module.
releaseOutputRingItem(int) - Method in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Releases the item obtained by calling DataChannelAdapter.getNextOutputRingItem(int), so that it may be reused for writing into by the last module.
remove(Component) - Method in class org.jlab.coda.emu.support.ui.MDIDesktopPane
removeAppender(LoggerAppender) - Method in class org.jlab.coda.emu.support.logger.Logger: Method removeAppender ...
removeDocument(Document) - Method in class org.jlab.coda.emu.support.ui.DebugFrame: Method removeDocument ...
removeEmptyTextNodes(Element) - Static method in class org.jlab.coda.emu.support.configurer.Configurer: Remove any empty text (child) nodes from a DOM node.
removeFromPanel(DataNode) - Method in class org.jlab.coda.emu.support.configurer.DataNode: Remove a DataNode object from this DataNode object as part of the JPanel.
reportStatus - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as type of status message periodically sent to rcServer.
representsEmuStatistics() - Method in interface org.jlab.coda.emu.EmuModule: If an EMU has more than one module, which module's statistics represent the EMU as a whole needs to be determined.
representsEmuStatistics() - Method in class org.jlab.coda.emu.modules.ModuleAdapter: If an EMU has more than one module, which module's statistics represent the EMU as a whole needs to be determined.
representStatistics - Variable in class org.jlab.coda.emu.modules.ModuleAdapter: If true, this module's statistics represents that of the EMU.
reserved - Variable in class org.jlab.coda.emu.support.data.RingItemAdapter: Reserved.
reset() - Method in class org.jlab.coda.emu.Emu: This method executes a RESET command.
reset() - Method in class org.jlab.coda.emu.EmuEventNotify: This method enables reuse of this object.
reset() - Method in class org.jlab.coda.emu.modules.Dummy: This method implements the RESET transition of the CODA run control state machine.
reset() - Method in class org.jlab.coda.emu.modules.EventRecording: This method implements the RESET transition of the CODA run control state machine.
reset() - Method in class org.jlab.coda.emu.modules.FarmController: This method implements the RESET transition of the CODA run control state machine.
reset() - Method in class org.jlab.coda.emu.modules.FastEventBuilder: This method implements the RESET transition of the CODA run control state machine.
reset() - Method in class org.jlab.coda.emu.modules.ModuleAdapter: This method implements the RESET transition of the CODA run control state machine.
reset() - Method in class org.jlab.coda.emu.modules.RocFixedRateSimulation: This method implements the RESET transition of the CODA run control state machine.
reset() - Method in class org.jlab.coda.emu.modules.RocSimulation: This method implements the RESET transition of the CODA run control state machine.
reset() - Method in class org.jlab.coda.emu.modules.ToFile: This method implements the RESET transition of the CODA run control state machine.
reset() - Method in class org.jlab.coda.emu.modules.TsFixedRateSimulation: This method implements the RESET transition of the CODA run control state machine.
reset() - Method in class org.jlab.coda.emu.modules.TsSimulation: This method implements the RESET transition of the CODA run control state machine.
reset() - Method in interface org.jlab.coda.emu.support.codaComponent.CODAComponent: Reset this CODA component.
reset() - Method in interface org.jlab.coda.emu.support.codaComponent.CODAStateMachine: This method implements the RESET transition of the CODA run control state machine.
reset() - Method in class org.jlab.coda.emu.support.codaComponent.CODAStateMachineAdapter: This method implements the RESET transition of the CODA run control state machine.
reset() - Method in class org.jlab.coda.emu.support.data.ByteBufferItem: Method to reset this item each time it is retrieved from the supply.
reset - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as type in message for the reset command.
reset() - Method in class org.jlab.coda.emu.support.transport.DataChannelImplCmsg: This method implements the RESET transition of the CODA run control state machine.
reset() - Method in class org.jlab.coda.emu.support.transport.DataChannelImplEmu: This method implements the RESET transition of the CODA run control state machine.
reset() - Method in class org.jlab.coda.emu.support.transport.DataChannelImplEt: This method implements the RESET transition of the CODA run control state machine.
reset() - Method in class org.jlab.coda.emu.support.transport.DataChannelImplFifo: This method implements the RESET transition of the CODA run control state machine.
reset() - Method in class org.jlab.coda.emu.support.transport.DataChannelImplFile: This method implements the RESET transition of the CODA run control state machine.
reset() - Method in class org.jlab.coda.emu.support.transport.DataTransportAdapter: This method implements the RESET transition of the CODA run control state machine.
reset() - Method in class org.jlab.coda.emu.support.transport.DataTransportImplCmsg: This method implements the RESET transition of the CODA run control state machine.
reset() - Method in class org.jlab.coda.emu.support.transport.DataTransportImplEmu: This method implements the RESET transition of the CODA run control state machine.
reset() - Method in class org.jlab.coda.emu.support.transport.DataTransportImplEt: This method implements the RESET transition of the CODA run control state machine.
reset() - Method in class org.jlab.coda.emu.support.transport.DataTransportImplFifo: This method implements the RESET transition of the CODA run control state machine.
reset() - Method in class org.jlab.coda.emu.support.ui.SmartToolbar: Remove all components from this toolbar.
resizeDesktop() - Method in class org.jlab.coda.emu.support.ui.MDIDesktopManager
respondingHost - Variable in class org.jlab.coda.emu.test.LocalEmuDomainServer: The host of the responding server to initial multicast probes of the local subnet.
resume - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as type in message for the set-run-type command.
ringBufferIn - Variable in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Ring buffer - one per input channel.
ringBuffersOut - Variable in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Array holding all ring buffers for output.
RingConsumerThread() - Constructor for class org.jlab.coda.emu.test.ByteBufferSupplyTest.RingConsumerThread
ringIndex - Variable in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Ring that the next event will show up on.
RingItem - Interface in org.jlab.coda.emu.support.data: This interface defines the type of item which may be passed to the EMU through its transport channels.
RingItemAdapter - Class in org.jlab.coda.emu.support.data: This class provides the boilerplate methods of the RingItem interface.
RingItemAdapter() - Constructor for class org.jlab.coda.emu.support.data.RingItemAdapter: Constructor.
RingItemAdapter(int) - Constructor for class org.jlab.coda.emu.support.data.RingItemAdapter: Constructor.
RingItemAdapter(RingItem) - Constructor for class org.jlab.coda.emu.support.data.RingItemAdapter: Copy constructor which copies references and doesn't clone.
ringItemCount - Variable in class org.jlab.coda.emu.modules.FastEventBuilder: Number of items in build thread ring buffers.
RingItemFactory - Class in org.jlab.coda.emu.support.data: Class used by the Disruptor's RingBuffer to populate itself with PayloadBuffers or PayloadBanks.
RingItemFactory() - Constructor for class org.jlab.coda.emu.support.data.RingItemFactory
RocFixedRateSimulation - Class in org.jlab.coda.emu.modules: This class simulates a Roc.
RocFixedRateSimulation(String, Map<String, String>, Emu) - Constructor for class org.jlab.coda.emu.modules.RocFixedRateSimulation: Constructor RocSimulation creates a simulated ROC instance.
RocFixedRateSimulation.EventGeneratingThread - Class in org.jlab.coda.emu.modules: This thread generates events with junk data in it (all zeros except first word which is the event number).
RocSimulation - Class in org.jlab.coda.emu.modules: This class simulates a Roc.
RocSimulation(String, Map<String, String>, Emu) - Constructor for class org.jlab.coda.emu.modules.RocSimulation: Constructor RocSimulation creates a simulated ROC instance.
RocSimulation.EventGeneratingThread - Class in org.jlab.coda.emu.modules: This thread generates events with junk data in it (all zeros except first word which is the event number).
RocSynchronizer - Class in org.jlab.coda.emu.test: This class is designed to receive output from fake Roc EMUs and is used to synchronize their output so they all produce the same amount of events and therefore the run can END properly.
RocSynchronizer(String[]) - Constructor for class org.jlab.coda.emu.test.RocSynchronizer: Constructor.
RocSynchronizer.myCallback - Class in org.jlab.coda.emu.test: This class defines the callback to be run when a message matching our subscription arrives.
run() - Method in class org.jlab.coda.emu.Emu.StatusReportingThread: Send a status message every 2 (statusReportingPeriod/1000) seconds.
run() - Method in class org.jlab.coda.emu.modules.FastEventBuilder.BuildingThread
run() - Method in class org.jlab.coda.emu.modules.ModuleAdapter.RateCalculatorThread: Method run is the action loop of the thread.
run() - Method in class org.jlab.coda.emu.modules.RocFixedRateSimulation.EventGeneratingThread
run() - Method in class org.jlab.coda.emu.modules.RocSimulation.EventGeneratingThread
run() - Method in class org.jlab.coda.emu.support.transport.EmuDomainServer
run() - Method in class org.jlab.coda.emu.support.transport.EmuDomainTcpServer: This method is executed as a thread.
run() - Method in class org.jlab.coda.emu.support.transport.EmuDomainUdpListener: This method is executed as a thread.
run() - Method in class org.jlab.coda.emu.support.ui.log.SwingLogConsoleDialog.MonitorRunnable
run() - Method in class org.jlab.coda.emu.test.blast.EmuBlastee: Method to allow connections from EmuBlasters and read their data.
run() - Method in class org.jlab.coda.emu.test.blast.EmuBlastee2: Method to allow connections from EmuBlasters and read their data.
run() - Method in class org.jlab.coda.emu.test.blast.EmuBlastee3: Method to allow connections from EmuBlasters and read their data.
run() - Method in class org.jlab.coda.emu.test.blast.EmuBlaster
run() - Method in class org.jlab.coda.emu.test.blast.EmuBlaster2
run() - Method in class org.jlab.coda.emu.test.BuildThreadTest.BuildThread
run() - Method in class org.jlab.coda.emu.test.BuildThreadTest.BuildThreadVol
run() - Method in class org.jlab.coda.emu.test.BuildThreadTest: This method is executed as a thread.
run() - Method in class org.jlab.coda.emu.test.ByteBufferSupplyTest.RingConsumerThread
run() - Method in class org.jlab.coda.emu.test.ByteBufferSupplyTest: This method is executed as a thread.
run() - Method in class org.jlab.coda.emu.test.EmuDomainReceiver: This method is executed as a thread.
run() - Method in class org.jlab.coda.emu.test.LocalEmuDomainServer
run() - Method in class org.jlab.coda.emu.test.LocalEmuDomainTcpServer: This method is executed as a thread.
run() - Method in class org.jlab.coda.emu.test.LocalEmuDomainUdpListener: This method is executed as a thread.
run() - Method in class org.jlab.coda.emu.test.RcProtocolTest: This method is executed as a thread.
run() - Method in class org.jlab.coda.emu.test.ReceiverCmsg: This method is executed as a thread.
run() - Method in class org.jlab.coda.emu.test.ReceiverEt.receiveDataThread
run() - Method in class org.jlab.coda.emu.test.ReceiverEt: This method is executed as a thread.
run() - Method in class org.jlab.coda.emu.test.RocSynchronizer: This method is executed as a thread.
run() - Method in class org.jlab.coda.emu.test.SenderCmsg: This method is executed as a thread.
run() - Method in class org.jlab.coda.emu.test.SenderCmsg.sendDataThread
run() - Method in class org.jlab.coda.emu.test.VardanERSAP.CrateAggregatingConsumer
run() - Method in class org.jlab.coda.emu.test.VardanERSAP.CrateProducer
run() - Method in class org.jlab.coda.emu.test.VardanERSAP.OutputRingConsumer
run() - Method in class org.jlab.coda.emu.test.VardanERSAP: Run a setup with 2 crate producer threads, one crate consumer thread and one output ring consumer thread.
runCommandType - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as type in subscription that receives run commands.
runEndTime - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants
runNumberPayload - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as payload name for item holding run number.
runStartTime - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants
runTypePayload - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as payload name for item holding run type name.

S

send(cMsgMessage) - Method in class org.jlab.coda.emu.test.RcProtocolTest: Method to send a message to the domain server for further distribution.
sendDataThread() - Constructor for class org.jlab.coda.emu.test.SenderCmsg.sendDataThread
SenderCmsg - Class in org.jlab.coda.emu.test: This class is designed to send data to an EMU.
SenderCmsg(String[]) - Constructor for class org.jlab.coda.emu.test.SenderCmsg: Constructor.
SenderCmsg.sendDataThread - Class in org.jlab.coda.emu.test
sendMHandlerMessage(int, String) - Method in class org.jlab.coda.emu.support.messaging.CMSGPortal: Send messages to a callback in this emu so that it can send all rocs the lowest number of evio events received by this event builder in a single ET buffer.
sendRcErrorMessage(String) - Method in class org.jlab.coda.emu.Emu: Send run control an error message which gets displayed in its GUI.
sendRcInfoMessage(String) - Method in class org.jlab.coda.emu.Emu: Send run control a informational message which gets displayed in its GUI.
sendRcSevereMessage(String) - Method in class org.jlab.coda.emu.Emu: Send run control a severe error message which gets displayed in its GUI.
sendRcWarningMessage(String) - Method in class org.jlab.coda.emu.Emu: Send run control a warning message which gets displayed in its GUI.
sendRocMessage(int, int, int) - Method in class org.jlab.coda.emu.support.messaging.CMSGPortal: Send a message to the connected rocs specifying the lowest and highest number of evio events per single ET buffer that was received by the input channels to this emu.
sendStatusMessage() - Method in class org.jlab.coda.emu.Emu: Allow the "out-of-band" sending of a status message to run control.
sendStatusMessage() - Method in class org.jlab.coda.emu.Emu.StatusReportingThread: Send a cMsg message with the status of this EMU to run control's cMsg server.
sendStatusMessage() - Method in class org.jlab.coda.emu.test.RcProtocolTest: Send a cMsg message with the status of this EMU to test server.
sequence - Variable in class org.jlab.coda.emu.modules.ToFile: One sequence per recording thread.
sequenceBarriers - Variable in class org.jlab.coda.emu.support.transport.DataChannelAdapter: One barrier for each output ring.
sequences - Variable in class org.jlab.coda.emu.support.transport.DataChannelAdapter: One sequence for each output ring.
sequencesIn - Variable in class org.jlab.coda.emu.modules.EventRecording: One sequence for recording thread.
sequentialReleaseOutputRingItem(byte[], long[], int) - Method in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Releases the items obtained by calling DataChannelAdapter.getNextOutputRingItem(int), so that it may be reused for writing into by the last module.
serialize(Document) - Static method in class org.jlab.coda.emu.support.configurer.Configurer: Method to serialize a DOM XML document into a string.
server - Variable in class org.jlab.coda.emu.support.ui.EMUCommander: cMsg connection object.
serverPort - Variable in class org.jlab.coda.emu.support.transport.EmuDomainServer: This server's UDP listening port.
serverPort - Variable in class org.jlab.coda.emu.test.LocalEmuDomainServer: This server's UDP listening port.
sessionCommandType - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as type in subscription that receives session commands.
sessionPayload - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as payload name for item holding session name.
setAll(EvioEvent, ByteBuffer, EvioNode, EventType, ControlType, boolean, boolean, int, int, int, int, String, ByteBufferItem, ByteBufferSupply) - Method in interface org.jlab.coda.emu.support.data.RingItem: For a ringItem producer, when a new item is obtained, it must have all of its values set or reset.
setAll(EvioEvent, ByteBuffer, EvioNode, EventType, ControlType, boolean, boolean, int, int, int, int, String, ByteBufferItem, ByteBufferSupply) - Method in class org.jlab.coda.emu.support.data.RingItemAdapter: For a ringItem producer, when a new item is obtained, it must have all of its values set or reset.
setAllSize(Dimension) - Method in class org.jlab.coda.emu.support.ui.MDIDesktopPane: Sets all component size properties ( maximum, minimum, preferred) to the given dimension.
setAllSize(int, int) - Method in class org.jlab.coda.emu.support.ui.MDIDesktopPane: Sets all component size properties ( maximum, minimum, preferred) to the given width and height.
setArg(String, cMsgPayloadItem) - Method in class org.jlab.coda.emu.support.control.Command: Keep a set of tags, each associated with a cMsgPayloadItem (although Object is used instead to avoid strict dependence on cMsg).
setAttachment(Object) - Method in interface org.jlab.coda.emu.support.data.Attached: This method sets an attached object.
setAttachment(Object) - Method in class org.jlab.coda.emu.support.data.RingItemAdapter: This method sets an attached object.
setAttr(String, String) - Method in interface org.jlab.coda.emu.support.transport.DataTransport: This method sets an attribute.
setAttr(String, String) - Method in class org.jlab.coda.emu.support.transport.DataTransportAdapter: This method sets an attribute.
setBounds(int, int, int, int) - Method in class org.jlab.coda.emu.support.ui.MDIDesktopPane
setBuffer(ByteBuffer) - Method in interface org.jlab.coda.emu.support.data.RingItem: Set the ByteBuffer object (containing evio data) referenced by this ring item if any.
setBuffer(ByteBuffer) - Method in class org.jlab.coda.emu.support.data.RingItemAdapter: Set the ByteBuffer object (containing evio data) referenced by this ring item if any.
setBufferLevel(int) - Method in class org.jlab.coda.emu.Emu: Set the smallest number of evio-events/et-buffer that connected DC/PEB found.
setBufferLevel - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as type in message for the set-buffer-level command.
setCodaClass(CODAClass) - Method in class org.jlab.coda.emu.Emu: Method to set the CODAClass member.
setCodaid(int) - Method in class org.jlab.coda.emu.Emu: Set the id of this CODA component.
setCodaid(int) - Method in interface org.jlab.coda.emu.support.codaComponent.CODAComponent: Set the id of this CODA component.
setConnected(boolean) - Method in class org.jlab.coda.emu.support.transport.DataTransportAdapter: This method sets if this DataTransport object is connected or not.
setConsumerSequence(long) - Method in class org.jlab.coda.emu.support.data.ByteBufferItem: Set the sequence of this item for consumer.
setControlType(ControlType) - Method in interface org.jlab.coda.emu.support.data.RingItem: Set the type of control event this is.
setControlType(ControlType) - Method in class org.jlab.coda.emu.support.data.RingItemAdapter: Set the type of control event this is.
setData(Object) - Method in class org.jlab.coda.emu.support.logger.LoggingEvent: Method setData sets the data of this LoggingEvent object.
setDataPath(EmuDataPath) - Method in class org.jlab.coda.emu.Emu: Set the data path object that directs how the run control commands are distributed among the EMU parts.
setDestinationBaList(String[]) - Method in interface org.jlab.coda.emu.support.transport.DataChannel: Set the output channel's list of destination broadcast addresses of emu TCP server when using emu sockets to communicate - each corresponding to the same element of the IpList.
setDestinationBaList(String[]) - Method in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Set the output channel's list of destination broadcast addresses of emu TCP server when using emu sockets to communicate - each corresponding to the same element of the IpList.
setDestinationIpList(String[]) - Method in interface org.jlab.coda.emu.support.transport.DataChannel: Set the output channel's list of possible destination IP addresses of emu TCP server when using emu sockets to communicate.
setDestinationIpList(String[]) - Method in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Set the output channel's list of possible destination IP addresses of emu TCP server when using emu sockets to communicate.
setError(boolean) - Method in interface org.jlab.coda.emu.support.data.RingItem: Sets whether or not this object has an error.
setError(boolean) - Method in class org.jlab.coda.emu.support.data.RingItemAdapter: Sets whether or not this object has an error.
setErrorState(String) - Method in class org.jlab.coda.emu.Emu: This method sets the state of this Emu to ERROR, but not if the emu is currently resetting in which case it immediately returns.
setEvent(EvioEvent) - Method in interface org.jlab.coda.emu.support.data.RingItem: Set the evio event object contained in this ring item.
setEvent(EvioEvent) - Method in class org.jlab.coda.emu.support.data.RingItemAdapter: Set the evio event object contained in this ring item.
setEventCount(int) - Method in interface org.jlab.coda.emu.support.data.RingItem: Set the number of ROC events in this object's data.
setEventCount(int) - Method in class org.jlab.coda.emu.support.data.RingItemAdapter: Set the number of ROC events in this object's data.
setEventType(BitSet, EventType) - Static method in class org.jlab.coda.emu.EmuUtilities: Encode the event type into the bit info word which will be in each evio block header.
setEventType(EventType) - Method in interface org.jlab.coda.emu.support.data.RingItem: Set the type of event (ROC raw, physics, user, control , etc) this is.
setEventType(EventType) - Method in class org.jlab.coda.emu.support.data.RingItemAdapter: Set the type of event (ROC raw, physics, user, control , etc) this is.
setFirstEvent(BitSet) - Static method in class org.jlab.coda.emu.EmuUtilities: Encode the "is first event" into the bit info word which will be in evio block header.
setFirstEventNumber(long) - Method in interface org.jlab.coda.emu.support.data.RingItem: Set the first event number in this object's data.
setFirstEventNumber(long) - Method in class org.jlab.coda.emu.support.data.RingItemAdapter: Set the first event number in this object's data.
setForce(boolean) - Method in class org.jlab.coda.emu.support.data.ByteBufferItem: Set the flag used to suggest a forced write to a consumer.
setFromConsumerGet(boolean) - Method in class org.jlab.coda.emu.support.data.ByteBufferItem: Set whether this item was obtained through a call to consumerGet().
setInterval - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as type in message for the set-interval command.
setLogger(Logger) - Static method in class org.jlab.coda.emu.support.configurer.Configurer
setLogger(Logger) - Method in class org.jlab.coda.emu.support.ui.log.SwingLogConsoleDialog
setMessage(cMsgMessage) - Method in class org.jlab.coda.emu.support.control.Command: Set the cMsg message containing the Run Control command.
setMyObject(Object) - Method in class org.jlab.coda.emu.support.data.ByteBufferItem: Set the auxiliary object.
setName(String) - Method in interface org.jlab.coda.emu.support.transport.DataTransport: This method sets the name of this DataTransport object.
setName(String) - Method in class org.jlab.coda.emu.support.transport.DataTransportAdapter: This method sets the name of this DataTransport object.
setNextEventAndRing() - Method in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Set the index of the next buildable event to get from the module and the ring it will appear on.
setNode(EvioNode) - Method in interface org.jlab.coda.emu.support.data.RingItem: Set the EvioNode object which selects a particular event in the ByteBuffer referenced by this ring item, if any.
setNode(EvioNode) - Method in class org.jlab.coda.emu.support.data.RingItemAdapter: Set the EvioNode object which selects a particular event in the ByteBuffer referenced by this ring item, if any.
setNonFatalBuildingError(boolean) - Method in interface org.jlab.coda.emu.support.data.RingItem: Sets whether or not this object generated a non-fatal error while being built.
setNonFatalBuildingError(boolean) - Method in class org.jlab.coda.emu.support.data.RingItemAdapter: Sets whether or not this object generated a non-fatal error while being built.
setNormalSize() - Method in class org.jlab.coda.emu.support.ui.MDIDesktopManager
setOutputDestination(int, String) - Method in class org.jlab.coda.emu.Emu: Change an existing single output destination name in the array of names.
setPreEnd - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as type in message for the preEnd command.
setProducerSequence(long) - Method in class org.jlab.coda.emu.support.data.ByteBufferItem: Set the sequence of this item for producer.
setRecordId(int) - Method in interface org.jlab.coda.emu.support.data.RingItem: This method sets the record id.
setRecordId(int) - Method in class org.jlab.coda.emu.support.data.RingItemAdapter: This method sets the record id.
setRecordId(int) - Method in interface org.jlab.coda.emu.support.transport.DataChannel: Set the record ID number of the latest event through this channel.
setRecordId(int) - Method in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Set the record ID number of the latest event through this channel.
setReusableByteBuffer(ByteBufferSupply, ByteBufferItem) - Method in interface org.jlab.coda.emu.support.data.RingItem: Set the objects needed to release (by calling RingItem.releaseByteBuffer()) the referenced ByteBuffer when no longer needed.
setReusableByteBuffer(ByteBufferSupply, ByteBufferItem) - Method in class org.jlab.coda.emu.support.data.RingItemAdapter: Set the objects needed to release (by calling RingItem.releaseByteBuffer()) the referenced ByteBuffer when no longer needed.
setRunNumber(int) - Method in class org.jlab.coda.emu.Emu: Set the run number of this CODA component.
setRunNumber(int) - Method in interface org.jlab.coda.emu.support.codaComponent.CODAComponent: Set the run number of this CODA component.
setRunNumber - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as type in message for the set-run-number command.
setRunType(String) - Method in class org.jlab.coda.emu.Emu: Set the runType of this CODA component.
setRunType(String) - Method in interface org.jlab.coda.emu.support.codaComponent.CODAComponent: Set the runType of this CODA component.
setRunType - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as type in message for the set-run-type command.
setRunTypeId(int) - Method in class org.jlab.coda.emu.Emu: Set the numeric code representing the run type of this CODA component.
setRunTypeId(int) - Method in interface org.jlab.coda.emu.support.codaComponent.CODAComponent: Set the numeric code representing the run type of this CODA component.
setSession - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as type in message for the set-session command.
setSourceId(int) - Method in interface org.jlab.coda.emu.support.data.RingItem: If emu input channel is reading Roc Raw data, then this method sets the CODA id number of the source.
setSourceId(int) - Method in class org.jlab.coda.emu.support.data.RingItemAdapter: If emu input channel is reading Roc Raw data, then this method sets the CODA id number of the source.
setSourceName(String) - Method in interface org.jlab.coda.emu.support.data.RingItem: Set the name of the data input channel (from xml config file) which read the data into this object.
setSourceName(String) - Method in class org.jlab.coda.emu.support.data.RingItemAdapter: Set the name of the data input channel (from xml config file) which read the data into this object.
setState(CODAStateIF) - Method in class org.jlab.coda.emu.Emu: This method sets the state of this Emu, but not if emu is currently resetting in which case it immediately returns.
setSwitchRing(boolean) - Method in interface org.jlab.coda.emu.support.data.RingItem: If merging contents of multiple rings, it's convenient to have a means to tell the caller when to switch reading from one ring to the next.
setSwitchRing(boolean) - Method in class org.jlab.coda.emu.support.data.RingItemAdapter: If merging contents of multiple rings, it's convenient to have a means to tell the caller when to switch reading from one ring to the next.
setSync(boolean) - Method in interface org.jlab.coda.emu.support.data.RingItem: Sets whether or not this object is a sync event.
setSync(boolean) - Method in class org.jlab.coda.emu.support.data.RingItemAdapter: Sets whether or not this object is a sync event.
setTagEndian(int, boolean) - Static method in class org.jlab.coda.emu.support.data.Evio: Set the given CODA-format tag to indicate data is little/big endian.
setupInputRingBuffers() - Method in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Setup the input channel ring buffers.
setupOutputRingBuffers() - Method in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Setup the output channel ring buffers.
setUserBoolean(boolean) - Method in class org.jlab.coda.emu.support.data.ByteBufferItem: Set user boolean.
setUserInt(int) - Method in class org.jlab.coda.emu.support.data.ByteBufferItem: Set the user integer.
setUsers(int) - Method in class org.jlab.coda.emu.support.data.ByteBufferItem: Set the number of users of this buffer.
setValue(Document, String, String) - Static method in class org.jlab.coda.emu.support.configurer.Configurer: Method to set the value of the DataNode object associated with the Node object given by the path argument.
setValue(String) - Method in class org.jlab.coda.emu.support.configurer.DataNode
setVisibilityAdjustment(boolean) - Method in class org.jlab.coda.emu.support.ui.log.LogTextCaret: Method setVisibilityAdjustment sets the visibilityAdjustment of this LogTextCaret object.
SEVERE - Static variable in class org.jlab.coda.emu.support.logger.LoggingEvent: SEVERE msg, 13 - 14.
shutdown() - Method in class org.jlab.coda.emu.support.messaging.CMSGPortal: Disconnect from the runcontrol platform.
simpleTest - Variable in class org.jlab.coda.emu.test.ByteBufferSupplyTest
singleEventOut - Variable in class org.jlab.coda.emu.support.transport.DataChannelAdapter: If we're a PEB or SEB and want to send 1 evio event per et-buffer/cmsg-message, then this is true.
sleepNanos(long) - Static method in class org.jlab.coda.emu.EmuUtilities: Spin-yield loop based alternative to Thread.sleep Based on the code of Andy Malakov http://andy-malakov.blogspot.fr/2010/06/alternative-to-threadsleep.html
SmartToolbar - Class in org.jlab.coda.emu.support.ui
SmartToolbar() - Constructor for class org.jlab.coda.emu.support.ui.SmartToolbar: No-arg constructor.
SmartToolbar(int) - Constructor for class org.jlab.coda.emu.support.ui.SmartToolbar
SmartToolbar(String) - Constructor for class org.jlab.coda.emu.support.ui.SmartToolbar
SmartToolbar(String, int) - Constructor for class org.jlab.coda.emu.support.ui.SmartToolbar
sourceId - Variable in class org.jlab.coda.emu.support.data.RingItemAdapter: If the event type is RocRaw, this is the CODA id of the source.
sourceName - Variable in class org.jlab.coda.emu.support.data.RingItemAdapter: The name of the source of these CODA events.
startElement(Element) - Method in class org.jlab.coda.emu.support.configurer.Configurer
startLatch - Variable in class org.jlab.coda.emu.test.ByteBufferSupplyTest
startReporting - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as type in message for the start-reporting command.
state() - Method in class org.jlab.coda.emu.Emu: Get the state of this object.
state() - Method in class org.jlab.coda.emu.modules.ModuleAdapter: Get the state of this object.
state() - Method in interface org.jlab.coda.emu.support.codaComponent.StatedObject: Get the state of this object.
state - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants
state() - Method in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Get the state of this object.
state() - Method in class org.jlab.coda.emu.support.transport.DataTransportAdapter: Get the state of this object.
state() - Method in class org.jlab.coda.emu.support.ui.EMUCommander.CommandHandler
StatedObject - Interface in org.jlab.coda.emu.support.codaComponent: An object that implements this interface has a state.
statGatheringPeriod - Static variable in class org.jlab.coda.emu.modules.ModuleAdapter: Targeted time period in milliseconds over which instantaneous rates will be calculated.
statistics - Variable in class org.jlab.coda.emu.modules.ModuleAdapter: Handle histogram of event build times.
Statistics - Class in org.jlab.coda.emu.support.data: This class keeps some statistics on time to build an event.
Statistics(int) - Constructor for class org.jlab.coda.emu.support.data.Statistics: Constructor.
Statistics(int, int) - Constructor for class org.jlab.coda.emu.support.data.Statistics: Constructor.
Statistics(int, int, int) - Constructor for class org.jlab.coda.emu.support.data.Statistics: Constructor.
statThread - Variable in class org.jlab.coda.emu.test.InputDataChannelImplEmu
StatusReportingThread() - Constructor for class org.jlab.coda.emu.Emu.StatusReportingThread
StdOutAppender - Class in org.jlab.coda.emu.support.logger
StdOutAppender() - Constructor for class org.jlab.coda.emu.support.logger.StdOutAppender
stopReporting - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as type in message for the stop-reporting command.
stopServer() - Method in class org.jlab.coda.emu.support.transport.EmuDomainServer: Stop all communication with Emu domain clients.
stopServer() - Method in class org.jlab.coda.emu.test.blast.EmuBlastee: Stop all communication with Emu domain clients.
stopServer() - Method in class org.jlab.coda.emu.test.blast.EmuBlastee2: Stop all communication with Emu domain clients.
stopServer() - Method in class org.jlab.coda.emu.test.blast.EmuBlastee3: Stop all communication with Emu domain clients.
stopServer() - Method in class org.jlab.coda.emu.test.LocalEmuDomainServer: Stop all communication with Emu domain clients.
streamCount - Variable in class org.jlab.coda.emu.test.VardanERSAP: Number of streams in 1 crate.
streamNum - Variable in class org.jlab.coda.emu.test.VardanERSAP.CrateProducer: Is this stream 0 or stream 1?
STRING_PARSE_MODE - Static variable in class org.jlab.coda.emu.support.configurer.Configurer: Field STRING_PARSE_MODE
success() - Method in enum org.jlab.coda.emu.support.codaComponent.CODATransition: Returns the CODA run control State (CODAState enum object) upon success of this transition.
success() - Method in class org.jlab.coda.emu.support.control.Command: If this object is a transition command, this method returns the state the Emu enters upon its success.
SwingLogConsoleDialog - Class in org.jlab.coda.emu.support.ui.log: Class SwingLogConsoleDialog
SwingLogConsoleDialog() - Constructor for class org.jlab.coda.emu.support.ui.log.SwingLogConsoleDialog
SwingLogConsoleDialog.MonitorRunnable - Class in org.jlab.coda.emu.support.ui.log
switchRing - Variable in class org.jlab.coda.emu.support.data.RingItemAdapter: When reading from multiple rings, is it time to change to next ring?

T

tagHasError(int) - Static method in class org.jlab.coda.emu.support.data.Evio: See if the given CODA-format tag indicates the ROC/EB has an error.
TEST_UDL - Variable in class org.jlab.coda.emu.support.ui.EMUCommander
theEndIsNigh() - Method in class org.jlab.coda.emu.Emu: Get whether END button has been pushed.
thread - Variable in class org.jlab.coda.emu.modules.ToFile: Main thread of this module.
tileFrames() - Method in class org.jlab.coda.emu.support.ui.MDIDesktopPane: Tile all internal frames
timeStatsOn - Variable in class org.jlab.coda.emu.modules.ModuleAdapter: If true, collect statistics on event build times (performance drag).
timeToBuild - Variable in class org.jlab.coda.emu.modules.ModuleAdapter: Histogram of time to build 1 event in nanoseconds (metadata in first 5 elements).
timeToBuild - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants
ToFile - Class in org.jlab.coda.emu.modules: This class is a simplified event recording module.
ToFile(String, Map<String, String>, Emu) - Constructor for class org.jlab.coda.emu.modules.ToFile: Constructor creates a new EventRecording instance.
toggleDebug() - Method in class org.jlab.coda.emu.support.logger.Logger: Method toggleDebug ...
toggleError() - Method in class org.jlab.coda.emu.support.logger.Logger: Method toggleError ...
ToolbarButton - Class in org.jlab.coda.emu.support.ui: Class ToolbarButton
ToolbarButton(String) - Constructor for class org.jlab.coda.emu.support.ui.ToolbarButton: Constructor ToolbarButton creates a new ToolbarButton instance.
ToolbarButton(Action) - Constructor for class org.jlab.coda.emu.support.ui.ToolbarButton: Constructor ToolbarButton creates a new ToolbarButton instance.
toString() - Method in class org.jlab.coda.emu.EmuDataPath: Create a string representation of this object.
toString() - Method in class org.jlab.coda.emu.support.logger.LoggerDataWrapper: Method toString ...
totalRingCapacity - Variable in class org.jlab.coda.emu.support.transport.DataChannelAdapter: Total number of slots in all output channel ring buffers.
transitionCommandType - Static variable in class org.jlab.coda.emu.support.messaging.RCConstants: String used as type in subscription that receives transition commands.
transport - Variable in class org.jlab.coda.emu.support.transport.EmuDomainServer
transport - Variable in class org.jlab.coda.emu.test.LocalEmuDomainServer
transportClass - Variable in class org.jlab.coda.emu.support.transport.DataTransportAdapter: Name of class extending this class.
transportState - Variable in class org.jlab.coda.emu.support.transport.DataTransportAdapter: DataTransport object's state.
TransportType - Enum in org.jlab.coda.emu.support.transport: This class is an enum which lists all the possible communication types used in input and output data channels.
treeToPanel(Node, int) - Static method in class org.jlab.coda.emu.support.configurer.Configurer: Recursive method to, using the given arg as the top of the tree, add all nodes in the tree to a JPanel for display in a GUI.
tryToCreateET() - Method in class org.jlab.coda.emu.support.transport.DataTransportImplEt: Get whether the ET system should be created by the EMU if it does not exist.
TsFixedRateSimulation - Class in org.jlab.coda.emu.modules: This class is used when running simulated, emu-based, fixed-output-rate ROCS.
TsFixedRateSimulation(String, Map<String, String>, Emu) - Constructor for class org.jlab.coda.emu.modules.TsFixedRateSimulation: Constructor.
TsSimulation - Class in org.jlab.coda.emu.modules: This class is used when running simulated, emu-based ROCS.
TsSimulation(String, Map<String, String>, Emu) - Constructor for class org.jlab.coda.emu.modules.TsSimulation: Constructor.

U

UDL - Variable in class org.jlab.coda.emu.support.ui.EMUCommander: UDL for cMsg connection.
unsetFirstEvent(BitSet) - Static method in class org.jlab.coda.emu.EmuUtilities: Encode the "is NOT first event" into the bit info word which will be in evio block header.
updateButtons(CODAStateIF) - Method in class org.jlab.coda.emu.support.ui.SmartToolbar: Enable or disable buttons depending on the emu state.

V

valueOf(String) - Static method in enum org.jlab.coda.emu.support.codaComponent.CODAClass: Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum org.jlab.coda.emu.support.codaComponent.CODACommand.InputType: Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum org.jlab.coda.emu.support.codaComponent.CODACommand: Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum org.jlab.coda.emu.support.codaComponent.CODAState: Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum org.jlab.coda.emu.support.codaComponent.CODATransition: Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum org.jlab.coda.emu.support.data.CODATag: Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum org.jlab.coda.emu.support.data.ControlType: Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum org.jlab.coda.emu.support.data.EventType: Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum org.jlab.coda.emu.support.transport.DataChannelAdapter.ThreadState: Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum org.jlab.coda.emu.support.transport.TransportType: Returns the enum constant of this type with the specified name.
values() - Static method in enum org.jlab.coda.emu.support.codaComponent.CODAClass: Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum org.jlab.coda.emu.support.codaComponent.CODACommand.InputType: Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum org.jlab.coda.emu.support.codaComponent.CODACommand: Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum org.jlab.coda.emu.support.codaComponent.CODAState: Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum org.jlab.coda.emu.support.codaComponent.CODATransition: Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum org.jlab.coda.emu.support.data.CODATag: Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum org.jlab.coda.emu.support.data.ControlType: Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum org.jlab.coda.emu.support.data.EventType: Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum org.jlab.coda.emu.support.transport.DataChannelAdapter.ThreadState: Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum org.jlab.coda.emu.support.transport.TransportType: Returns an array containing the constants of this enum type, in the order they are declared.
VardanERSAP - Class in org.jlab.coda.emu.test: This class is an example of how one might take 2 producers (one for each ring) and have a consumer that reads one item from each ring and puts them both into a third, output ring.
VardanERSAP() - Constructor for class org.jlab.coda.emu.test.VardanERSAP
VardanERSAP.ByteBufferFactory - Class in org.jlab.coda.emu.test: Class used by the Disruptor's RingBuffer to populate itself with ByteBuffers.
VardanERSAP.CrateAggregatingConsumer - Class in org.jlab.coda.emu.test: Thread to consume from two streams in one crate and send (be a producer for) an output ring.
VardanERSAP.CrateProducer - Class in org.jlab.coda.emu.test: Thread to produce one stream in one crate.
VardanERSAP.OutputRingConsumer - Class in org.jlab.coda.emu.test: Thread to consume from output ring.
verbose - Variable in class org.jlab.coda.emu.support.ui.EMUCommander

W

waitForEvent() - Method in class org.jlab.coda.emu.EmuEventNotify: This method waits indefinitely for the endWait() method to be called before it returns.
waitForEvent(long, TimeUnit) - Method in class org.jlab.coda.emu.EmuEventNotify: This method waits for the endWait() method to be called or for the timeout to expire before it returns.
warn(String) - Method in class org.jlab.coda.emu.support.logger.Logger: Method warn ...
WARN - Static variable in class org.jlab.coda.emu.support.logger.LoggingEvent: WARNING msg, 5 - 8.
wordCountTotal - Variable in class org.jlab.coda.emu.modules.ModuleAdapter: Sum of the sizes, in 32-bit words, of all evio events written to the outputs.
wordRate - Variable in class org.jlab.coda.emu.modules.ModuleAdapter: Instantaneous word rate in Hz over the last time period of length ModuleAdapter.statGatheringPeriod.
writeEventBuffer(ByteBuffer, ByteBuffer, long, long, boolean) - Method in class org.jlab.coda.emu.modules.RocFixedRateSimulation
writeEventBuffer(ByteBuffer, ByteBuffer, long, long, boolean, boolean) - Method in class org.jlab.coda.emu.modules.RocSimulation

A B C D E F G H I K L M N O P Q R S T U V W