- end - Static variable in class org.jlab.coda.et.EtConstants
-
Add station to end of linked list.
- endianBig - Static variable in class org.jlab.coda.et.EtConstants
-
An event's data is big endian.
- endianLittle - Static variable in class org.jlab.coda.et.EtConstants
-
An event's data is little endian.
- endianLocal - Static variable in class org.jlab.coda.et.EtConstants
-
An event's data endian is the same as the local host's.
- endianNotLocal - Static variable in class org.jlab.coda.et.EtConstants
-
An event's data endian is opposite of the local host's.
- endianSwitch - Static variable in class org.jlab.coda.et.EtConstants
-
An event's data endian is to be switched.
- error - Static variable in class org.jlab.coda.et.DatagramReceive
-
Status of error.
- error - Static variable in class org.jlab.coda.et.EtConstants
-
General error.
- errorBadArg - Static variable in class org.jlab.coda.et.EtConstants
-
Error when argument has bad value.
- errorBusy - Static variable in class org.jlab.coda.et.EtConstants
-
Error specifying that a station's input list is being accessed by
another thread or process.
- errorClosed - Static variable in class org.jlab.coda.et.EtConstants
-
Error when network error.
- errorDead - Static variable in class org.jlab.coda.et.EtConstants
-
Error specifying that the ET system is dead.
- errorEmpty - Static variable in class org.jlab.coda.et.EtConstants
-
Error specifying that a station has an empty input list.
- errorExists - Static variable in class org.jlab.coda.et.EtConstants
-
Error specifying that something already exists.
- errorNetwork - Static variable in class org.jlab.coda.et.EtConstants
-
Error when network error.
- errorNoMemory - Static variable in class org.jlab.coda.et.EtConstants
-
Error when no memory available.
- errorNoRemote - Static variable in class org.jlab.coda.et.EtConstants
-
Error not used in java ET.
- errorRead - Static variable in class org.jlab.coda.et.EtConstants
-
Error specifying problems in a network read.
- errorRemote - Static variable in class org.jlab.coda.et.EtConstants
-
Error not used in java ET.
- errorSocket - Static variable in class org.jlab.coda.et.EtConstants
-
Error when socket error.
- errorTimeout - Static variable in class org.jlab.coda.et.EtConstants
-
Error specifying a time out.
- errorTooBig - Static variable in class org.jlab.coda.et.EtConstants
-
Error when memory asked for is too big.
- errorTooMany - Static variable in class org.jlab.coda.et.EtConstants
-
Error specifying too many of something.
- errorWakeUp - Static variable in class org.jlab.coda.et.EtConstants
-
Error when a thread was told to wake up from a blocking read.
- errorWrite - Static variable in class org.jlab.coda.et.EtConstants
-
Error specifying problems in a network write.
- EtAttachment - Class in org.jlab.coda.et
-
This class defines an ET system user's attachment to a station.
- EtAttachment(EtStation, int, EtSystem) - Constructor for class org.jlab.coda.et.EtAttachment
-
Constructor for creating an attachment to a specific ET system and station.
- EtConstants - Class in org.jlab.coda.et
-
This class defines some useful constants which are made to be identical to those
used in the C-based ET system code.
- EtContainer - Class in org.jlab.coda.et
-
This is a helper class to facilitate efficient java programming in
making, getting, putting and dumping ET events.
- EtContainer(int) - Constructor for class org.jlab.coda.et.EtContainer
-
Constructor.
- EtContainer(int, int) - Constructor for class org.jlab.coda.et.EtContainer
-
Constructor specifying the number and size of internal buffers
which are then created and initialized.
- EtContainer.MethodType - Enum in org.jlab.coda.et
-
Keep track of whether we're setup to do a
newEvents(), getEvents(), putEvents(), or dumpEvents().
- EtEvent - Interface in org.jlab.coda.et
-
Interface used to define methods necessary to be an Event.
- EtEventImpl - Class in org.jlab.coda.et
-
This class defines an ET event.
- EtEventImpl(int) - Constructor for class org.jlab.coda.et.EtEventImpl
-
Creates an event object for users of Java-based ET systems or by the
system itself.
- EtEventImpl(int, int, boolean, boolean) - Constructor for class org.jlab.coda.et.EtEventImpl
-
Creates an event object for ET system users when connecting to ET systems
over the network.
- EtEventImpl(int, int, int, int, int, int, int, int, boolean, ByteBuffer) - Constructor for class org.jlab.coda.et.EtEventImpl
-
Creates an event object for ET system users when connecting to local, C-based ET systems
and using native methods to call et_events_new.
- EtEventImpl(int, int, int, int, int, int, int, int, int, int, int[], boolean, ByteBuffer) - Constructor for class org.jlab.coda.et.EtEventImpl
-
Creates an event object for ET system users when connecting to local, C-based ET systems
and using native methods to call et_events_get.
- EtEventImpl(EtEventImpl) - Constructor for class org.jlab.coda.et.EtEventImpl
-
Creates an event object by duplicating another.
- EtEventSelectable - Interface in org.jlab.coda.et
-
This interface defines a method to use for custom event selection in a station.
- EtJniAccess - Class in org.jlab.coda.et
-
This class handles all calls to native methods which, in turn,
makes calls to the C ET library routines to get, new, put, and dump events.
- EtStation - Class in org.jlab.coda.et
-
This class defines a station for the ET system user.
- EtStation(String, int, EtSystem) - Constructor for class org.jlab.coda.et.EtStation
-
Creates a station object.
- EtStationConfig - Class in org.jlab.coda.et
-
This class specifies a configuration used to create a new station.
- EtStationConfig() - Constructor for class org.jlab.coda.et.EtStationConfig
-
Creates a new StationConfig object with default values for everything.
- EtStationConfig(EtStationConfig) - Constructor for class org.jlab.coda.et.EtStationConfig
-
Creates a new StationConfig object from an existing one.
- EtStationSelection - Class in org.jlab.coda.et
-
This class contains an example of a user-defined method used to
select events for a station.
- EtStationSelection() - Constructor for class org.jlab.coda.et.EtStationSelection
-
- EtSystem - Class in org.jlab.coda.et
-
This class implements an object which allows a user to interact with an ET
system.
- EtSystem(EtSystemOpenConfig, int) - Constructor for class org.jlab.coda.et.EtSystem
-
Construct a new EtSystem object.
- EtSystem(EtSystemOpenConfig) - Constructor for class org.jlab.coda.et.EtSystem
-
Construct a new EtSystem object.
- EtSystem(EtSystemOpen, int) - Constructor for class org.jlab.coda.et.EtSystem
-
Construct a new EtSystem object.
- EtSystemOpen - Class in org.jlab.coda.et
-
This class opens (finds and connects to) an ET system.
- EtSystemOpen(EtSystemOpenConfig) - Constructor for class org.jlab.coda.et.EtSystemOpen
-
Constructor which stores copy of argument.
- EtSystemOpenConfig - Class in org.jlab.coda.et
-
This class defines a set of configuration parameters used to open an ET system.
- EtSystemOpenConfig() - Constructor for class org.jlab.coda.et.EtSystemOpenConfig
-
No arg constructor.
- EtSystemOpenConfig(String, String, Collection<String>, Collection<String>, boolean, int, int, int, int, int) - Constructor for class org.jlab.coda.et.EtSystemOpenConfig
-
Most general constructor for creating a new EtSystemOpenConfig object.
- EtSystemOpenConfig(String, String) - Constructor for class org.jlab.coda.et.EtSystemOpenConfig
-
Constructor for broadcasting on all subnets.
- EtSystemOpenConfig(String, int, String) - Constructor for class org.jlab.coda.et.EtSystemOpenConfig
-
Constructor for broadcasting on all subnets.
- EtSystemOpenConfig(String, int, String, Collection<String>) - Constructor for class org.jlab.coda.et.EtSystemOpenConfig
-
Constructor for broadcasting on given subnets.
- EtSystemOpenConfig(String, String, Collection<String>, int, int) - Constructor for class org.jlab.coda.et.EtSystemOpenConfig
-
Constructor for multicasting.
- EtSystemOpenConfig(String, String, int) - Constructor for class org.jlab.coda.et.EtSystemOpenConfig
-
Constructor for connecting directly to tcp server.
- EtSystemOpenConfig(EtSystemOpenConfig) - Constructor for class org.jlab.coda.et.EtSystemOpenConfig
-
Constructor to create a new EtSystemOpenConfig object from another.
- EtUtils - Class in org.jlab.coda.et
-
Collection of methods to help manipulate bytes in arrays.
- EtUtils() - Constructor for class org.jlab.coda.et.EtUtils
-
- eventCount - Variable in class org.jlab.coda.et.EtContainer
-
Number of valid events when getting event array for newEvents and getEvents.
- eventNew - Static variable in class org.jlab.coda.et.EtConstants
-
Event has been obtained with newEvents, not getEvents.
- eventUsed - Static variable in class org.jlab.coda.et.EtConstants
-
Event has been obtained with getEvents, not newEvents.
- getAge() - Method in interface org.jlab.coda.et.EtEvent
-
- getAge() - Method in class org.jlab.coda.et.EtEventImpl
-
- getAllBroadcastAddresses() - Static method in class org.jlab.coda.et.EtUtils
-
Get all local IP broadcast addresses in a list in dotted-decimal form.
- getAllHosts() - Method in class org.jlab.coda.et.EtSystemOpen
-
Gets all host names when multiple ET systems respond.
- getAllIpAddresses() - Static method in class org.jlab.coda.et.EtUtils
-
Get all local IP addresses in a list in dotted-decimal form.
- getAllPorts() - Method in class org.jlab.coda.et.EtSystemOpen
-
Gets all port numbers when multiple ET systems respond.
- getAtt() - Method in class org.jlab.coda.et.EtContainer
-
Get the attachment to ET system.
- getAttachmentsMax() - Method in class org.jlab.coda.et.EtSystem
-
Gets the maximum number of attachments allowed in the ET system.
- getAttLocal() - Method in class org.jlab.coda.et.EtContainer
-
If ET is java-based in this JVM, attachment to it.
- getBlockMode() - Method in class org.jlab.coda.et.EtStation
-
Gets the station configuration's block mode.
- getBlockMode() - Method in class org.jlab.coda.et.EtStationConfig
-
Gets the block mode.
- getBroadcastAddress(String) - Static method in class org.jlab.coda.et.EtUtils
-
Given a local IP address as an argument, this method will return its
broadcast or subnet address.
- getBroadcastAddress2(String) - Static method in class org.jlab.coda.et.EtUtils
-
Given a local IP address as an argument, this method will return its
broadcast or subnet address.
- getBroadcastAddresses() - Method in class org.jlab.coda.et.EtSystemOpen
-
Gets list of all the broadcast addresses (dot decimal)
of the host the opened ET system is running on.
- getBroadcastAddrs() - Method in class org.jlab.coda.et.EtSystemOpenConfig
-
Gets multicast addresses.
- getByteOrder() - Method in interface org.jlab.coda.et.EtEvent
-
Gets the event data's byte order.
- getByteOrder() - Method in class org.jlab.coda.et.EtEventImpl
-
Gets the event data's byte order.
- getConfig() - Method in class org.jlab.coda.et.EtSystem
-
Gets a copy of the configuration object used to specify how to open the ET system.
- getConfig() - Method in class org.jlab.coda.et.EtSystemOpen
-
Gets a copy of the EtSystemOpenConfig configuration object.
- getControl() - Method in interface org.jlab.coda.et.EtEvent
-
Gets a copy of the event's control array.
- getControl() - Method in class org.jlab.coda.et.EtEventImpl
-
Gets a copy of the event's control array.
- getControlNoCopy() - Method in interface org.jlab.coda.et.EtEvent
-
Gets a reference to the event's control array without copying.
- getControlNoCopy() - Method in class org.jlab.coda.et.EtEventImpl
-
Gets a reference to the event's control array without copying.
- getCount() - Method in class org.jlab.coda.et.EtContainer
-
Get the number of events asked for in newEvents() or getEvents().
- getCue() - Method in class org.jlab.coda.et.EtStation
-
Gets the station configuration's cue.
- getCue() - Method in class org.jlab.coda.et.EtStationConfig
-
Gets the cue size.
- getData() - Method in interface org.jlab.coda.et.EtEvent
-
Gets the data array which is backing the event's data buffer if there is one.
- getData() - Method in class org.jlab.coda.et.EtEventImpl
-
Gets the data array which is backing the event's data buffer if there is one.
- getData() - Method in class org.jlab.coda.et.EtSystem
-
Gets all information about the ET system.
- getDataBuffer() - Method in interface org.jlab.coda.et.EtEvent
-
Gets the event's data buffer.
- getDataBuffer() - Method in class org.jlab.coda.et.EtEventImpl
-
Gets the event's data buffer.
- getDataStatus() - Method in interface org.jlab.coda.et.EtEvent
-
Gets the status of the data (set by the system), which can be OK DataStatus.OK,
corrupted DataStatus.CORRUPT, or possibly corrupted
DataStatus.POSSIBLYCORRUPT.
- getDataStatus() - Method in class org.jlab.coda.et.EtEventImpl
-
Gets the status of the data (set by the system), which can be OK DataStatus.OK,
corrupted DataStatus.CORRUPT, or possibly corrupted
DataStatus.POSSIBLYCORRUPT.
- getDataStatusValue() - Method in class org.jlab.coda.et.EtEventImpl
-
Get int value associated with DataStatus enum.
- getDebug() - Method in class org.jlab.coda.et.EtSystem
-
Gets the debug output level.
- getDebug() - Method in class org.jlab.coda.et.EtSystemOpen
-
Gets the debug output level.
- getEndian() - Method in class org.jlab.coda.et.EtSystemOpen
-
Gets the endian value of the opened ET system.
- getEtEventSize() - Method in class org.jlab.coda.et.EtContainer
-
Get the size of ET system events in bytes.
- getEtName() - Method in class org.jlab.coda.et.EtSystemOpenConfig
-
Gets the ET system name.
- getEventArray() - Method in class org.jlab.coda.et.EtContainer
-
- getEventArrayLocal() - Method in class org.jlab.coda.et.EtContainer
-
- getEventCount() - Method in class org.jlab.coda.et.EtContainer
-
Get the number of valid events resulting from a call to newEvents or getEvents.
- getEvents(EtAttachment, Mode, Modify, int, int) - Method in class org.jlab.coda.et.EtContainer
-
Set this container up for getting events from an ET system.
- getEvents(EtAttachment, Mode, Modify, int, int, boolean) - Method in class org.jlab.coda.et.EtContainer
-
Set this container up for getting events from an ET system.
- getEvents(AttachmentLocal, int, int, int) - Method in class org.jlab.coda.et.EtContainer
-
This method is for expert use only!
Set this container up for getting events from an ET system.
- getEvents(long, int, int, int, int, int) - Method in class org.jlab.coda.et.EtJniAccess
-
Get events from the local, C-based ET system.
- getEvents(EtAttachment, Mode, Modify, int, int) - Method in class org.jlab.coda.et.EtSystem
-
Get events from an ET system.
- getEvents(EtContainer) - Method in class org.jlab.coda.et.EtSystem
-
Get events from an ET system.
- getEventsDump() - Method in class org.jlab.coda.et.EtAttachment
-
Gets the number of events dumped (recycled by returning to GRAND_CENTRAL
station) through this attachment.
- getEventsGet() - Method in class org.jlab.coda.et.EtAttachment
-
Gets the number of events gotten from the ET system by this attachment.
- getEventSize() - Method in class org.jlab.coda.et.EtSystem
-
Gets the "normal" event size in bytes.
- getEventSize() - Method in class org.jlab.coda.et.EtSystemOpen
-
Gets the size of the normal events in bytes of the opened ET system.
- getEventsMake() - Method in class org.jlab.coda.et.EtAttachment
-
Gets the number of new events gotten from the ET system by this attachment.
- getEventsPut() - Method in class org.jlab.coda.et.EtAttachment
-
Gets the number of events put into the ET system by this attachment.
- getFlowMode() - Method in class org.jlab.coda.et.EtStationConfig
-
Gets the flow mode.
- getGroup() - Method in class org.jlab.coda.et.EtContainer
-
Get the group number from which to get events in newEvents().
- getGroup() - Method in interface org.jlab.coda.et.EtEvent
-
Gets the group the event belongs to (1, 2, ...) if ET system events are divided into groups.
- getGroup() - Method in class org.jlab.coda.et.EtEventImpl
-
Gets the group the event belongs to (1, 2, ...) if ET system events are divided into groups.
- getGroupCount() - Method in class org.jlab.coda.et.EtSystem
-
Gets the number of groups events are divided into.
- getGroups() - Method in class org.jlab.coda.et.EtSystem
-
Gets the array defining groups events are divided into.
- getHeartbeat() - Method in class org.jlab.coda.et.EtSystem
-
Gets the ET system heartbeat.
- getHistogram() - Method in class org.jlab.coda.et.EtSystem
-
Gets histogram containing data showing how many events in GRAND_CENTRAL's
input list when new events are requested by users.
- getHoldEvents() - Method in class org.jlab.coda.et.EtContainer
-
Get the array used to store references to events being put/dumped using JNI with local calls.
- getHost() - Method in class org.jlab.coda.et.EtSystem
-
Gets the ET system's host name.
- getHost() - Method in class org.jlab.coda.et.EtSystemOpenConfig
-
Gets the ET system host name or general location of ET system.
- getHostAddress() - Method in class org.jlab.coda.et.EtSystemOpen
-
Gets the address (dot decimal) of the host the opened ET system is running on.
- getHostAddresses() - Method in class org.jlab.coda.et.EtSystemOpen
-
Gets list of all the IP addresses (dot decimal)
of the host the opened ET system is running on.
- getId() - Method in class org.jlab.coda.et.EtAttachment
-
Gets the id number of this attachment.
- getId() - Method in interface org.jlab.coda.et.EtEvent
-
Gets the event's id number.
- getId() - Method in class org.jlab.coda.et.EtEventImpl
-
Gets the event's id number.
- getId() - Method in class org.jlab.coda.et.EtStation
-
Gets the station id.
- getInputCount() - Method in class org.jlab.coda.et.EtStation
-
Gets the number of events in the station's input list.
- getInputStream() - Method in class org.jlab.coda.et.EtSystem
-
Get the data input stream to talk to ET system server.
- getInstance(String) - Static method in class org.jlab.coda.et.EtJniAccess
-
Get an instance of this object for a particular ET system.
- getJni() - Method in class org.jlab.coda.et.EtSystemOpen
-
Gets the object used to access native methods when using local, C-based ET system.
- getLanguage() - Method in class org.jlab.coda.et.EtSystem
-
Gets the ET system's implementation language.
- getLanguage() - Method in class org.jlab.coda.et.EtSystemOpen
-
Gets the language used to implement the opened ET system.
- getLastIndex() - Method in class org.jlab.coda.et.EtContainer
-
Get the index of the last valid event in the array of the events being put.
- getLength() - Method in interface org.jlab.coda.et.EtEvent
-
Gets the length of the data in bytes.
- getLength() - Method in class org.jlab.coda.et.EtEventImpl
-
Gets the length of the data in bytes.
- getLocalAddress() - Method in class org.jlab.coda.et.EtSystem
-
Gets the local address (dot decimal) used to connect to ET system.
- getLocalAddress() - Method in class org.jlab.coda.et.EtSystemOpen
-
Gets the local address (dot decimal) used to connect to ET system.
- getLocalEtId() - Method in class org.jlab.coda.et.EtJniAccess
-
Get the et id.
- getMatchingLocalIpAddress(String) - Static method in class org.jlab.coda.et.EtUtils
-
Given an IP address as an argument, this method will return that if it matches
one of the local IP addresses.
- getMemSize() - Method in interface org.jlab.coda.et.EtEvent
-
Gets the size of the data buffer in bytes.
- getMemSize() - Method in class org.jlab.coda.et.EtEventImpl
-
Gets the size of the data buffer in bytes.
- getMethod() - Method in class org.jlab.coda.et.EtContainer
-
Get variable keeping track of whether we're setup to do a
newEvents(), getEvents(), putEvents(), or dumpEvents().
- getMicroSec() - Method in class org.jlab.coda.et.EtContainer
-
Get the timeout in microseconds used when obtaining
events with newEvents() or getEvents().
- getMode() - Method in class org.jlab.coda.et.EtContainer
-
Get the mode used to obtain events with newEvents() or getEvents().
- getModify() - Method in interface org.jlab.coda.et.EtEvent
-
Gets the event's modify value when receiving it over the network.
- getModify() - Method in class org.jlab.coda.et.EtEventImpl
-
Gets the event's modify value when receiving it over the network.
- getMulticastAddrs() - Method in class org.jlab.coda.et.EtSystemOpenConfig
-
Gets multicast addresses.
- getName() - Method in class org.jlab.coda.et.EtStation
-
Gets the station name.
- getName() - Method in class org.jlab.coda.et.EtSystemOpen
-
Gets the name of the ET system (file).
- getNetworkContactMethod() - Method in class org.jlab.coda.et.EtSystemOpenConfig
-
Gets the means used to contact an ET system.
- getNetworkInterface() - Method in class org.jlab.coda.et.EtSystemOpenConfig
-
Get the network interface used for connecting to the ET system.
- getNumAttachments() - Method in class org.jlab.coda.et.EtStation
-
Gets the station's number of attachments.
- getNumAttachments() - Method in class org.jlab.coda.et.EtSystem
-
Gets the number of attachments in the ET system.
- getNumEvents() - Method in class org.jlab.coda.et.EtSystem
-
Gets the number of events in the ET system.
- getNumEvents() - Method in class org.jlab.coda.et.EtSystemOpen
-
Gets the total number of events of the opened ET system.
- getNumMulticastAddrs() - Method in class org.jlab.coda.et.EtSystemOpenConfig
-
Gets the number of multicast addresses.
- getNumProcesses() - Method in class org.jlab.coda.et.EtSystem
-
Gets the number of local processes in the ET system.
- getNumStations() - Method in class org.jlab.coda.et.EtSystem
-
Gets the number of stations in the ET system.
- getNumTemps() - Method in class org.jlab.coda.et.EtSystem
-
Gets the number of temp events in the ET system.
- getOutputCount() - Method in class org.jlab.coda.et.EtStation
-
Gets the number of events in the station's output list.
- getOutputStream() - Method in class org.jlab.coda.et.EtSystem
-
Get the data output stream to receive from the ET system server.
- getOwner() - Method in interface org.jlab.coda.et.EtEvent
-
Gets the attachment id of the attachment which owns or got the event.
- getOwner() - Method in class org.jlab.coda.et.EtEventImpl
-
Gets the attachment id of the attachment which owns or got the event.
- getPid() - Method in class org.jlab.coda.et.EtSystem
-
Gets the UNIX pid of the ET system process.
- getPrescale() - Method in class org.jlab.coda.et.EtStation
-
Gets the station configuration's prescale.
- getPrescale() - Method in class org.jlab.coda.et.EtStationConfig
-
Gets the prescale value.
- getPriority() - Method in interface org.jlab.coda.et.EtEvent
-
Gets the event's priority, either high Priority.HIGH or low Priority.LOW.
- getPriority() - Method in class org.jlab.coda.et.EtEventImpl
-
Gets the event's priority, either high Priority.HIGH or low Priority.LOW.
- getPriorityValue() - Method in class org.jlab.coda.et.EtEventImpl
-
Get int value associated with Priority enum.
- getProcessesMax() - Method in class org.jlab.coda.et.EtSystem
-
Gets the maximum number of local processes allowed in the ET system.
- getRawByteOrder() - Method in interface org.jlab.coda.et.EtEvent
-
Gets the raw byte order data (0x04030201 or 0x01020304).
- getRawByteOrder() - Method in class org.jlab.coda.et.EtEventImpl
-
Gets the raw byte order data (0x04030201 or 0x01020304).
- getResponders() - Method in class org.jlab.coda.et.EtSystemOpen
-
Gets a map of the hosts and ports of responding ET systems to broad/multicasts.
- getResponsePolicy() - Method in class org.jlab.coda.et.EtSystemOpenConfig
-
Gets policy on what to do about multiple responding ET systems to a
broadcast or multicast.
- getRestoreMode() - Method in class org.jlab.coda.et.EtStation
-
Gets the station configuration's restore mode.
- getRestoreMode() - Method in class org.jlab.coda.et.EtStationConfig
-
Gets the restore mode.
- getSelect() - Method in class org.jlab.coda.et.EtStationConfig
-
Gets a copy of the select integer array.
- getSelectClass() - Method in class org.jlab.coda.et.EtStation
-
Gets the name of the class containing the station's user-defined select
method.
- getSelectClass() - Method in class org.jlab.coda.et.EtStationConfig
-
Gets the name of the class containing the user-defined select method.
- getSelectFunction() - Method in class org.jlab.coda.et.EtStation
-
Gets the name of the station's user-defined select function.
- getSelectFunction() - Method in class org.jlab.coda.et.EtStationConfig
-
Gets the user-defined select function name.
- getSelectInts() - Method in class org.jlab.coda.et.EtSystemOpen
-
Gets the number of station select integers of the opened ET system.
- getSelectLibrary() - Method in class org.jlab.coda.et.EtStation
-
Gets the name of the library containing the station's user-defined select
function.
- getSelectLibrary() - Method in class org.jlab.coda.et.EtStationConfig
-
Gets the name of the library containing the user-defined select function.
- getSelectMode() - Method in class org.jlab.coda.et.EtStation
-
Gets the station configuration's select mode.
- getSelectMode() - Method in class org.jlab.coda.et.EtStationConfig
-
Gets the select mode.
- getSelectWords() - Method in class org.jlab.coda.et.EtStation
-
Gets the station's select array used for filtering events.
- getSize() - Method in class org.jlab.coda.et.EtContainer
-
Get the size in bytes of events asked for in newEvents().
- getSizeLimit() - Method in class org.jlab.coda.et.EtEventImpl
-
Gets the size limit of the data buffer in bytes when using a C-based ET system.
- getSocket() - Method in class org.jlab.coda.et.EtSystemOpen
-
Gets the socket connecting this object to the ET system.
- getStation() - Method in class org.jlab.coda.et.EtAttachment
-
Gets the object of the station attached to.
- getStationParallelPosition(EtStation) - Method in class org.jlab.coda.et.EtSystem
-
Gets the position of a parallel station in its ordered list of
parallel stations.
- getStationPosition(EtStation) - Method in class org.jlab.coda.et.EtSystem
-
Gets the position of a station in the ordered list of stations.
- getStationsMax() - Method in class org.jlab.coda.et.EtSystem
-
Gets the maximum number of stations allowed in the ET system.
- getStatus() - Method in class org.jlab.coda.et.EtStation
-
Gets the station's status.
- getSys() - Method in class org.jlab.coda.et.EtAttachment
-
Sets the EtSystemUse object for using the ET system.
- getSys() - Method in class org.jlab.coda.et.EtStation
-
Gets the ET system object.
- getTcpPort() - Method in class org.jlab.coda.et.EtSystem
-
Gets the tcp server port number.
- getTcpPort() - Method in class org.jlab.coda.et.EtSystemOpen
-
Gets the tcp server port number of the opened ET system.
- getTcpPort() - Method in class org.jlab.coda.et.EtSystemOpenConfig
-
Gets TCP server port number of the ET system.
- getTcpRecvBufSize() - Method in class org.jlab.coda.et.EtSystemOpenConfig
-
Get the TCP send buffer size in bytes.
- getTcpSendBufSize() - Method in class org.jlab.coda.et.EtSystemOpenConfig
-
Get the TCP receive buffer size in bytes.
- getTempsMax() - Method in class org.jlab.coda.et.EtSystem
-
Gets the maximum number of temp events allowed in the ET system.
- getTTL() - Method in class org.jlab.coda.et.EtSystemOpenConfig
-
Gets time-to-live value for multicasting.
- getUdpPort() - Method in class org.jlab.coda.et.EtSystemOpenConfig
-
Gets UDP port number for broad/multicasting or sending udp packets to known hosts.
- getUserMode() - Method in class org.jlab.coda.et.EtStation
-
Gets the station configuration's user mode.
- getUserMode() - Method in class org.jlab.coda.et.EtStationConfig
-
Gets the user mode.
- getVersion() - Method in class org.jlab.coda.et.EtSystemOpen
-
Gets the major version number of the opened ET system.
- getWaitTime() - Method in class org.jlab.coda.et.EtSystemOpenConfig
-
If no ET system is available, the number of milliseconds we wait while trying to open it.
- group - Variable in class org.jlab.coda.et.EtContainer
-
Group number from which to get events in newEvents().
- select(SystemCreate, StationLocal, EtEvent) - Method in interface org.jlab.coda.et.EtEventSelectable
-
An event selection method must follow this form.
- select(SystemCreate, StationLocal, EtEvent) - Method in class org.jlab.coda.et.EtStationSelection
-
- selfConsistent() - Method in class org.jlab.coda.et.EtSystemOpenConfig
-
Determine if vital parameters are set and all settings are self consistent.
- serverPort - Static variable in class org.jlab.coda.et.EtConstants
-
A default port on which ET system TCP server makes connections with users.
- setAge(Age) - Method in class org.jlab.coda.et.EtEventImpl
-
- setBlockMode(int) - Method in class org.jlab.coda.et.EtStation
-
Sets the station's block mode dynamically.
- setBlockMode(int) - Method in class org.jlab.coda.et.EtStationConfig
-
Sets the station's block mode value.
- setBroadcastAddrs(Collection<String>) - Method in class org.jlab.coda.et.EtSystemOpenConfig
-
Sets the collection of broadcast addresses.
- setByteOrder(ByteOrder) - Method in interface org.jlab.coda.et.EtEvent
-
Set the event data's byte order.
- setByteOrder(int) - Method in interface org.jlab.coda.et.EtEvent
-
- setByteOrder(int) - Method in class org.jlab.coda.et.EtEventImpl
-
- setByteOrder(ByteOrder) - Method in class org.jlab.coda.et.EtEventImpl
-
Set the event data's byte order.
- setConnectRemotely(boolean) - Method in class org.jlab.coda.et.EtSystemOpenConfig
-
Sets whether we going to connect to an ET system remotely only (=true), or whether
we will try to use memory mapping and JNI with local C-based ET systems.
- setControl(int[]) - Method in interface org.jlab.coda.et.EtEvent
-
Sets the event's control array by copying it into the event.
- setControl(int[]) - Method in class org.jlab.coda.et.EtEventImpl
-
Sets the event's control array by copying it into the event.
- setCue(int) - Method in class org.jlab.coda.et.EtStation
-
Sets the station's cue size dynamically.
- setCue(int) - Method in class org.jlab.coda.et.EtStationConfig
-
Sets the station's cue size.
- setData(byte[]) - Method in class org.jlab.coda.et.EtEventImpl
-
Sets the event's data without copying.
- setDataBuffer(ByteBuffer) - Method in class org.jlab.coda.et.EtEventImpl
-
Sets the event's data buffer (must be backed by data array).
- setDataStatus(DataStatus) - Method in class org.jlab.coda.et.EtEventImpl
-
Sets the event's data status.
- setDebug(int) - Method in class org.jlab.coda.et.EtSystem
-
Sets the debug output level.
- setDebug(int) - Method in class org.jlab.coda.et.EtSystemOpen
-
Sets the debug output level.
- setEtName(String) - Method in class org.jlab.coda.et.EtSystemOpenConfig
-
Sets the ET system name.
- setFlowMode(int) - Method in class org.jlab.coda.et.EtStationConfig
-
Sets the station's flow mode value.
- setGroup(int) - Method in class org.jlab.coda.et.EtEventImpl
-
Sets the group the event belongs to: (1, 2, ...) if ET system events are divided into groups,
or group = 1 if not.
- setHasEndEvent(boolean) - Method in class org.jlab.coda.et.EtContainer
-
Set whether the events being put contain the END event.
- setHost(String) - Method in class org.jlab.coda.et.EtSystemOpenConfig
-
Sets the ET system host name or broad/multicast destination.
- setId(int) - Method in class org.jlab.coda.et.EtEventImpl
-
Sets the event's id number.
- setJava(boolean) - Method in class org.jlab.coda.et.EtEventImpl
-
Sets flag specifying whether the ET system process is Java based or not.
- setLastIndex(int) - Method in class org.jlab.coda.et.EtContainer
-
Set the index of the last valid event in the array of the events being put.
- setLength(int) - Method in interface org.jlab.coda.et.EtEvent
-
Sets the event's data length in bytes.
- setLength(int) - Method in class org.jlab.coda.et.EtEventImpl
-
Sets the event's data length in bytes.
- setLengthFromServer(int) - Method in class org.jlab.coda.et.EtEventImpl
-
Set the length of valid data from server where sizeLimit may be 0.
- setMemSize(int) - Method in class org.jlab.coda.et.EtEventImpl
-
Sets the size of the data buffer in bytes.
- setModify(Modify) - Method in class org.jlab.coda.et.EtEventImpl
-
Sets whether the user wants to read the event only, will modify only the event header
(everything except the data), or will modify the data and/or header.
- setMulticastAddrs(Collection<String>) - Method in class org.jlab.coda.et.EtSystemOpenConfig
-
Sets the collection of multicast addresses.
- setNetworkContactMethod(int) - Method in class org.jlab.coda.et.EtSystemOpenConfig
-
Sets the means or method of contacting an ET system.
- setNetworkInterface(String) - Method in class org.jlab.coda.et.EtSystemOpenConfig
-
Set the network interface (in dotted-decimal format) used for connecting to the ET system.
- setNoDelay(boolean) - Method in class org.jlab.coda.et.EtSystemOpenConfig
-
Set the TCP no-delay setting.
- setOwner(int) - Method in class org.jlab.coda.et.EtEventImpl
-
Sets the owner of the event (attachment using event or system).
- setPrescale(int) - Method in class org.jlab.coda.et.EtStation
-
Sets the station's prescale dynamically.
- setPrescale(int) - Method in class org.jlab.coda.et.EtStationConfig
-
Sets the station's prescale value.
- setPriority(Priority) - Method in interface org.jlab.coda.et.EtEvent
-
Sets the event's priority, either high Priority.HIGH or low Priority.LOW.
- setPriority(Priority) - Method in class org.jlab.coda.et.EtEventImpl
-
Sets the event's priority, either high Priority.HIGH or low Priority.LOW.
- setRawByteOrder(int) - Method in interface org.jlab.coda.et.EtEvent
-
Set the event data's byte order as big with 0x04030201 or
as little with 0x01020304.
- setRawByteOrder(int) - Method in class org.jlab.coda.et.EtEventImpl
-
Set the event data's byte order as big with 0x04030201 or
as little with 0x01020304.
- setResponsePolicy(int) - Method in class org.jlab.coda.et.EtSystemOpenConfig
-
Sets the policy on what to do about multiple responding ET systems to a
broadcast or multicast.
- setRestoreMode(int) - Method in class org.jlab.coda.et.EtStation
-
Sets the station's restore mode dynamically.
- setRestoreMode(int) - Method in class org.jlab.coda.et.EtStationConfig
-
Sets the station's restore mode value.
- setSelect(int[]) - Method in class org.jlab.coda.et.EtStationConfig
-
Sets the station's select integer array.
- setSelectClass(String) - Method in class org.jlab.coda.et.EtStationConfig
-
Sets the class containing the user-defined select method.
- setSelectFunction(String) - Method in class org.jlab.coda.et.EtStationConfig
-
Sets the station's user-defined select function.
- setSelectLibrary(String) - Method in class org.jlab.coda.et.EtStationConfig
-
Sets the library containing the user-defined select function.
- setSelectMode(int) - Method in class org.jlab.coda.et.EtStationConfig
-
Sets the station's select mode value.
- setSelectWords(int[]) - Method in class org.jlab.coda.et.EtStation
-
Sets the station's select array - used for filtering events.
- setSizeLimit(int) - Method in class org.jlab.coda.et.EtEventImpl
-
Sets the limit of the size of the data buffer in bytes.
- setStationPosition(EtStation, int, int) - Method in class org.jlab.coda.et.EtSystem
-
Changes the position of a station in the ordered list of stations.
- setTcpPort(int) - Method in class org.jlab.coda.et.EtSystemOpenConfig
-
Sets the TCP server port number of the ET system.
- setTcpRecvBufSize(int) - Method in class org.jlab.coda.et.EtSystemOpenConfig
-
Set the TCP receive buffer size in bytes.
- setTcpSendBufSize(int) - Method in class org.jlab.coda.et.EtSystemOpenConfig
-
Set the TCP send buffer size in bytes.
- setTTL(int) - Method in class org.jlab.coda.et.EtSystemOpenConfig
-
Sets the time-to-live value for multicasting.
- setUdpPort(int) - Method in class org.jlab.coda.et.EtSystemOpenConfig
-
Sets the UDP port number for broad/multicasting and sending udp packets to known hosts.
- setUsable(boolean) - Method in class org.jlab.coda.et.EtAttachment
-
Sets whether this attachment object is usable or not.
- setUsable(boolean) - Method in class org.jlab.coda.et.EtStation
-
Sets whether this station object is usable or the station it represents has been removed.
- setUserMode(int) - Method in class org.jlab.coda.et.EtStation
-
Sets the station's user mode dynamically.
- setUserMode(int) - Method in class org.jlab.coda.et.EtStationConfig
-
Sets the station's user mode value.
- setWaitTime(long) - Method in class org.jlab.coda.et.EtSystemOpenConfig
-
If no ET system is available, set the number of milliseconds we wait while trying to open it.
- shortToBytes(short, ByteOrder, byte[], int) - Static method in class org.jlab.coda.et.EtUtils
-
Turn short into byte array.
- shortToBytes(short, byte[], int) - Static method in class org.jlab.coda.et.EtUtils
-
Copies a short value into 2 bytes of a byte array.
- size - Variable in class org.jlab.coda.et.EtContainer
-
Size in bytes of events asked for in newEvents().
- sleep - Static variable in class org.jlab.coda.et.EtConstants
-
User sleeps when waiting for events to fill a station's empty input list.
- sleepNanos(long) - Static method in class org.jlab.coda.et.EtUtils
-
Spin-yield loop based alternative to Thread.sleep
Based on the code of Andy Malakov
http://andy-malakov.blogspot.fr/2010/06/alternative-to-threadsleep.html
- socket - Variable in class org.jlab.coda.et.DatagramReceive
-
UDP Socket over which to communicate.
- stationActive - Static variable in class org.jlab.coda.et.EtConstants
-
A station's status meaning it exists and has at least one attachment.
- stationAttached(EtStation, EtAttachment) - Method in class org.jlab.coda.et.EtSystem
-
Is given attachment attached to a station?
- stationBlocking - Static variable in class org.jlab.coda.et.EtConstants
-
A station accepts every event into its cue and may block the flow of
events.
- stationCreating - Static variable in class org.jlab.coda.et.EtConstants
-
A station's status used in C implementations meaning the station is
currently being created.
- stationExists(String) - Method in class org.jlab.coda.et.EtSystem
-
Does given station exist?
- stationIdle - Static variable in class org.jlab.coda.et.EtConstants
-
A station's status meaning it exists but has no attachments.
- stationNameLenMax - Static variable in class org.jlab.coda.et.EtConstants
-
Maximum characters allowed in station name.
- stationNameToObject(String) - Method in class org.jlab.coda.et.EtSystem
-
Gets a station's object representation from its name.
- stationNonBlocking - Static variable in class org.jlab.coda.et.EtConstants
-
A station will not block the flow of events.
- stationParallel - Static variable in class org.jlab.coda.et.EtConstants
-
Events flow in parallel through stations in a single group.
- stationParallelHead - Static variable in class org.jlab.coda.et.EtConstants
-
Events flow in parallel through stations in a single group with this station
as the head of that group.
- stationRestoreGC - Static variable in class org.jlab.coda.et.EtConstants
-
Events owned by a crashed user process are restored to the ET system by
putting them in GRAND_CENTRAL station (recycling them).
- stationRestoreIn - Static variable in class org.jlab.coda.et.EtConstants
-
Events owned by a crashed user process are restored to the ET system in
the input list of the attachment's station.
- stationRestoreOut - Static variable in class org.jlab.coda.et.EtConstants
-
Events owned by a crashed user process are restored to the ET system in
the output list of the attachment's station.
- stationRestoreRedist - Static variable in class org.jlab.coda.et.EtConstants
-
Events owned by a crashed user process attached to a parallel station
are restored to the ET system by redistributing them among that group
of parallel stations (recycling them).
- stationSelectAll - Static variable in class org.jlab.coda.et.EtConstants
-
All events are placed into a station's cue with no filtering applied
(besides prescaling).
- stationSelectEqualCue - Static variable in class org.jlab.coda.et.EtConstants
-
Events are placed into the cues of a single group of parallel stations
in an algorithm designed to keep the cues equal in value.
- stationSelectInts - Static variable in class org.jlab.coda.et.EtConstants
-
A default value for the number of integers associated with each event that
stations may use to select or filter that event.
- stationSelectMatch - Static variable in class org.jlab.coda.et.EtConstants
-
Events are placed into a station's cue with a predefined filtering applied
(besides prescaling).
- stationSelectRRobin - Static variable in class org.jlab.coda.et.EtConstants
-
Events are placed into the cues of a single group of parallel stations
with a round robin distribution algorithm.
- stationSelectUser - Static variable in class org.jlab.coda.et.EtConstants
-
Events are placed into a station's cue with a user defined filtering
applied (besides prescaling).
- stationSerial - Static variable in class org.jlab.coda.et.EtConstants
-
Events flow "normally" - that is serially - through a station.
- stationUnused - Static variable in class org.jlab.coda.et.EtConstants
-
A station object's status meaning it has not been fully created yet.
- stationUserMulti - Static variable in class org.jlab.coda.et.EtConstants
-
A station may have multiple attachments.
- stationUserSingle - Static variable in class org.jlab.coda.et.EtConstants
-
A station may only have one attachment.
- status - Variable in class org.jlab.coda.et.DatagramReceive
-
Current status.
- structNew - Static variable in class org.jlab.coda.et.EtConstants
-
C structure state value for talking to C language ET systems.
- structOk - Static variable in class org.jlab.coda.et.EtConstants
-
C structure state value for talking to C language ET systems.
- swap - Static variable in class org.jlab.coda.et.EtConstants
-
An event's data needs to be swapped to be the same endian as the local
host's.
- swapArrayInt(byte[], int) - Static method in class org.jlab.coda.et.EtUtils
-
Swaps 4 bytes of a byte array in place.
- swapArrayShort(byte[], int) - Static method in class org.jlab.coda.et.EtUtils
-
Swaps 2 bytes of a byte array in place.
- system - Static variable in class org.jlab.coda.et.EtConstants
-
System is event owner
- systemTypeC - Static variable in class org.jlab.coda.et.EtConstants
-
Shared memory layout from C language ET system.
- systemTypeJava - Static variable in class org.jlab.coda.et.EtConstants
-
Shared memory layout from Java language ET system.