When you connect to the serial console on the Motorola
VME single board computer and switch it on or push the
front panel reset button you will get a 7 second countdown
to auto-boot. Hit any key to stop this countdown:

--------

                            VxWorks System Boot


Copyright 1984-1996  Wind River Systems, Inc.





CPU: Motorola MVME2300 - MPC 604r
Version: 5.3.1
BSP version: 1.1/4
Creation date: Apr 28 1998, 16:42:19




Press any key to stop auto-boot...
 4

[VxWorks Boot]: 

 ----------------

   At the [VxWorks Boot]: prompt you can print (p) or 
change (c) the boot parameters


[VxWorks Boot]: p

boot device          : scsi=2,0
processor number     : 0 
host name            : mizar
file name            : /sd0/boot/vx2700_sd0
inet on ethernet (e) : 129.57.14.20:fffffc00
host inet (h)        : 129.57.14.33
gateway inet (g)     : 129.57.12.1
user (u)             : abbottd
flags (f)            : 0x20 
target name (tn)     : davw10
startup script (s)   : /sd0/drew/pem/pemv7.boot
other (o)            : dc



The relevant parameters to modify will be 

   host name   -  Name of the Unix host

   e   -   IP address of the board:subnet mask
             (should be in /etc/hosts on unix as well)

   h   -   Unix host IP address

   g   -   IP gateway (this is optional - it can be cleared)

   u   -   username on unix host

   tn  -   name of VME board (should be in /etc/hosts on unix)

   o   -   device name for the network interface (dc)



If you use the "c" command you will be prompted at each line to change 
what is already there. If you just hit return the old value will
be saved. If you type a "." and hit return it will clear the entry.
If you type anything else and hit return then the new entry will
replace the old.